Instrukcja obsługi Cameo TRIBAR 400 IR

Cameo Ulga TRIBAR 400 IR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cameo TRIBAR 400 IR (56 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
TRIBAR IR400
12 X 3W WITH IR REMOTE CONTROLTRI LED BAR
CLTRIBAR400IR
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, CONTROLS AND INDICATORS 5
OPERATION 6-7
OPERATION USING THE IR REMOTE CONTROL 7-8
SETTING UP AND MOUNTING 8
DMX TECHNOLOGY 9
TECHNICAL SPECIFICATIONS 10
MANUFACTURER INFORMATION 10
DMX CONTROL 51-52
DEUTSCH
SICHERHEITSHINWEISE 11-12
EINFÜHRUNG 12
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 13
BEDIENUNG 14-15
BEDIENUNG MIT DER IR FERNBEDIENUNG 15-16
AUFSTELLUNG UND MONTAGE 16
DMX TECHNIK 17
TECHNISCHE DATEN 18
HERSTELLERERKLÄRUNGEN 18
DMX STEUERUNG 51-52
FRANÇAIS
INSTRUCTIONS DE SÉCURITÉ 19-20
INTRODUCTION 20
CONNECTEURS, CONTRÔLES ET INDICATEURS 21
UTILISATION 22-23
UTILISATION AVEC LA TÉLÉCOMMANDE INFRAROUGE 23-24
MISE EN PLACE ET MONTAGE 24
TECHNIQUE DMX 25
CARACTÉRISTIQUES TECHNIQUES 26
DÉCLARATIONS FABRICANT 26
PILOTAGE DMX 51-52
ESPAÑOL
INSTRUCCIONES DE SEGURIDAD 27-28
INTRODUCCIÓN 28
CONEXIONES, CONTROLES E INDICADORES 29
OPERACIÓN 30-31
USO DEL MANDO A DISTANCIA POR INFRARROJOS 31-32
INSTALACIÓN Y MONTAJE 32
TECNOLOGÍA DMX 33
CARACTERÍSTICAS TÉCNICAS 34
DECLARACIÓN DEL FABRICANTE 34
CONTROL DMX 51-52
POLSKI
ŚRODKI OSTROŻNOŚCI 35-36
WPROWADZENIE 36
ZŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 37
OBSŁUGA 38-39
OBSŁUGA ZA POMOCĄ PILOTA NA PODCZERWIEŃ 39-40
USTAWIENIE I MONTAŻ 40
TECHNIKA DMX 41
DANE TECHNICZNE 42
DEKLARACJE PRODUCENTA 42
STEROWANIE DMX 51-52
ITALIANO
MISURE PRECAUZIONALI 43-44
INTRODUZIONE 44
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 45
UTILIZZO 46-47
UTILIZZO CON TELECOMANDO A INFRAROSSI 47-48
INSTALLAZIONE E MONTAGGIO 48
TECNOLOGIA DMX 49
DATI TECNICI 50
DICHIARAZIONE DEL FABBRICANTE 50
CONTROLLO DMX 51-52
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Specyfikacje produktu

Marka: Cameo
Kategoria: Ulga
Model: TRIBAR 400 IR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cameo TRIBAR 400 IR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Cameo

Cameo

Cameo ZENIT W300 Instrukcja

23 Września 2024
Cameo

Cameo ZENIT W600 Instrukcja

22 Września 2024
Cameo

Cameo ZENIT W600 TW Instrukcja

22 Września 2024
Cameo

Cameo ZENIT Z120 G2 Instrukcja

21 Września 2024
Cameo

Cameo Q SPOT 15 RGBW Instrukcja

19 Września 2024
Cameo

Cameo CLSuperfly HP Derby Instrukcja

15 Września 2024
Cameo

Cameo Control 6 Instrukcja

15 Września 2024
Cameo

Cameo CLMPARFOOTPLUS Instrukcja

14 Września 2024
Cameo

Cameo UV Bar 200 IR Instrukcja

13 Września 2024
Cameo

Cameo TRIBAR 400 IR Instrukcja

13 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025