Instrukcja obsługi Cameo Flat Star LED PAR

Cameo Ulga Flat Star LED PAR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cameo Flat Star LED PAR (76 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/76
FLAT STAR
2IN1 LED FLAT PAR
CLFLATSTAR
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4-5
FRONT 5
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 6-7
OPERATION 7-10
IR REMOTE CONTROL 10
INSTALLATION AND MOUNTING 11
DMX TECHNOLOGY 11-12
TECHNICAL DATA 12-13
MANUFACTURER’S DECLARATIONS 13
DMX CONTROL 69-72
DEUTSCH
SICHERHEITSHINWEISE 14-15
EINFÜHRUNG 15-16
VORDERSEITE 16
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 17-18
BEDIENUNG 18-21
IR FERNBEDIENUNG 21
AUFSTELLUNG UND MONTAGE 22
DMX TECHNIK 22-23
TECHNISCHE DATEN 23-24
HERSTELLERERKLÄRUNGEN 24
DMX STEUERUNG 69-72
FRANCAIS
MESURES PRÉVENTIVES 25-26
INTRODUCTION 26
FACE AVANT 27
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 28-29
MODE D’EMPLOI 29-30
TÉLÉCOMMANDE INFRAROUGE 32
INSTALLATION ET MONTAGE 33
TECHNOLOGIE DMX 33-34
CARACTÉRISTIQUES TECHNIQUES 34-35
DÉCLARATIONS DU FABRICANT 35
PILOTAGE EN MODE DMX 69-72
ESPAÑOL
MEDIDAS DE SEGURIDAD 36-37
INTRODUCCIÓN 37-38
PARTE DELANTERA 38
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 39-40
FUNCIONAMIENTO 40-43
MANDO A DISTANCIA POR INFRARROJOS 43
INSTALACIÓN Y MONTAJE 44
TECNOLOGÍA DMX 44-45
DATOS TÉCNICOS 45-46
DECLARACIONES DEL FABRICANTE 46
CONTROL DMX 69-72
POLSKI
ŚRODKI OSTROŻNOŚCI 47-48
WPROWADZENIE 48-49
STRONA PRZEDNIA 49
ZŁĄCZA, ELEMENTY OBSŁUGOWE I WSKAŹNIKOWE 50-51
OBSŁUGA 51-54
PILOT NA PODCZERWIEŃ 54
USTAWIANIE I MONTAŻ 55
TECHNIKA DMX 55-56
DANE TECHNICZNE 56-57
OŚWIADCZENIA PRODUCENTA 57
STEROWANIE DMX 69-72
ITALIANO
MISURE PRECAUZIONALI 58-59
INTRODUZIONE 59
PANNELLO FRONTALE 60
RACCORDI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 61-62
COMANDO 62-65
TELECOMANDO A INFRAROSSI 65
INSTALLAZIONE E MONTAGGIO 66
TECNOLOGIA DMX 66
DATI TECNICI 67
DICHIARAZIONI DEL PRODUTTORE 69-72
CONTROLLO DMX
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Specyfikacje produktu

Marka: Cameo
Kategoria: Ulga
Model: Flat Star LED PAR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cameo Flat Star LED PAR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Cameo

Cameo

Cameo ZENIT W300 Instrukcja

23 Września 2024
Cameo

Cameo ZENIT W600 Instrukcja

22 Września 2024
Cameo

Cameo ZENIT W600 TW Instrukcja

22 Września 2024
Cameo

Cameo ZENIT Z120 G2 Instrukcja

21 Września 2024
Cameo

Cameo Q SPOT 15 RGBW Instrukcja

19 Września 2024
Cameo

Cameo CLSuperfly HP Derby Instrukcja

15 Września 2024
Cameo

Cameo Control 6 Instrukcja

15 Września 2024
Cameo

Cameo CLMPARFOOTPLUS Instrukcja

14 Września 2024
Cameo

Cameo UV Bar 200 IR Instrukcja

13 Września 2024
Cameo

Cameo TRIBAR 400 IR Instrukcja

13 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

KonstSmide

KonstSmide 7860-370 Instrukcja

15 Stycznia 2025
Gardena

Gardena 4206 Instrukcja

15 Stycznia 2025
Nedis

Nedis WIFILS52CRGBW Instrukcja

15 Stycznia 2025
Philips

Philips HF3304 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-22W60 Instrukcja

14 Stycznia 2025
Nedis

Nedis BTTNTP-44W120 Instrukcja

14 Stycznia 2025
Livarno

Livarno IAN 103915 Instrukcja

13 Stycznia 2025
ION

ION Party Ball USB Instrukcja

13 Stycznia 2025
Livarno

Livarno IAN 292038 Instrukcja

12 Stycznia 2025
Eurolite

Eurolite LED TMH-17 Instrukcja

12 Stycznia 2025