Instrukcja obsługi Callaway C70112

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Callaway C70112 (42 stron) w kategorii Afstandsmeter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/42
300 LASER RANGEFINDER
Product Callaway 300 Laser Rangender
Model 300
Dimensions 4.25” x 3” x 1.75“
Weight 7.58 oz.
Battery CR2 3 -Volt Lithium Battery
Display LCD display
Magnication 6X
Max Range 5-1000 yd
Range To Flag 5-300 yd
Accuracy +/- 1 yd
Unit of Measure Yards/Meters
Water/Fog Proof Yes IPX4 Designation
SPECIFICATIONS
INTRODUCTION
Thank You for choosing the Callaway 300 Laser Rangender
featuring P.A.T. (Pin Acquisition Technology). Designed to deliver
precise distance measurements, P.A.T. locks onto the agstick up
to 300 yards away, ensuring accuracy even when trees and other
objects are in the background.
2 INTRODUCTION
BATTERY INSTALLATION
The Callaway 300 uses a replaceable CR2 3-volt lithium battery. To
install, remove the battery cap located below the . Insert Eye Piece
battery negative end rst (at end) and close battery cap.
1. Lift hatch tab.
2. Turn counterclockwise to open.
3. Insert battery into chamber (negative end rst).
4. Replace battery cap and tighten by turning clockwise.
NOTE: If the is present on LCD display, there are Low Battery Icon
approximately 200 ranges left until the battery is completely drained.
The Low Battery Icon will ash if the battery life is very low. In this
case, the battery needs to be replaced before next use.
ENGLISH 3
INCLUDES
A. CR2 - 3VOLT LITHIUM BATTERY
B. Carry Case
C. Cleaning Cloth
D. Lance Strap

Specyfikacje produktu

Marka: Callaway
Kategoria: Afstandsmeter
Model: C70112

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Callaway C70112, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą