Instrukcja obsługi Calibo Breeze Silent AC

Calibo Wentylator Breeze Silent AC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Calibo Breeze Silent AC (16 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Breeze Silent AC
ATTENTION ELECTRICIANS:
ANY PROBLEMS FOUND DURING INSTALLATION OF THE FAN PLEASE CONTACT THE NATIONAL
WARRANTY NUMBER PRIOR TO LEAVING SITE.
DO NOT REMOVE THE FAN FROM THE CEILING
UNLESS INSTRUCTED TO DO SO.
National Warranty Number | 1300 116 305 Monday to Friday 9am to 5pm AEST
gNOTE: THIS FAN MUST BE INSTALLED BY A LICENSED AND QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH LOCAL AUTHORITY REGULATIONS
Australian Edition Version 1.4 August 2020
Installation & User Manual
Optional Light Kit
NOTE: THIS FAN MUST BE INSTALLED BY A LICENSED AND QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH LOCAL AUTHORITY REGULATIONS
1
IMPORTANT INFORMATION - PLEASE READ BEFORE ATTEMPTING INSTALLATION
1. Please read these instructions carefully, be mindful of all warnings and safety information shown throughout this
manual. Should you have any questions, please contact 1300 116 305.
2. Please review the accompanying assembly diagrams before attempting installation.
3. This fan MUST be installed by a licensed & qualied electrician according to local authority regulations and in
accordance with current wiring rules AS/NZS3000. Therefore, to protect our repair personnel, on-site warranty
claims will not be accepted if products have been installed by unlicensed persons.
4. A copy of the purchasing receipt and proof of installation by a licensed and qualied electrician according to local
authority regulations is required for all warranty claims.
5. Where special access equipment is required in accordance with local authority regulations all associated costs are
the responsibility of the owner.
6. We reserve the right to charge a $175 service fee for all call outs where the fan is found not to be defective and
/ or where access is not provided.
7. An isolation switch providing all pole disconnection of both fan and light must be tted in accordance with the
wiring rules (AS/NZS 60335.1 C1.7.12.2). In addition to all pole disconnection an isolation switch must be installed
for each individual fan located in the same room to allow for programming and ongoing maintenance.
8. The Fan and Light (if supplied) must be earthed.
9. Your warranty will be void if a solid state dimmer or any other brand of wall or remote controller is used.
10. Installation using steel beams, grid ceilings and exible structures are not recommended due to their inability to
absorb vibration from normal operation. Timber is the recommended material to support the fan.
11. To avoid possible electric shock during installation, be sure electricity is turned off at the main power box before
commencing work. Disconnect power by removing fuse or turning off circuit breaker before installing the fan.
Ensure all spliced connections are adequately insulated.
12. Warning! Do not allow the rotating fan blades to come into contact with any object, this can cause serious injury
or death.
13. Damage caused by; incorrect installation, Force-majeure, lightning, electrical surges & spikes, exposure to water,
pests or moisture is not covered under warranty.
14. In accordance with AS/NZS60355-1 & ASNZS60355-2-80: “This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure that they do not play with the appliance.”
15. Children should be supervised to ensure that they do not play with the appliance.
16. Children shall not play with the appliance.
17. Cleaning and user maintenance shall not be made by children.
18. Blades must be replaced only as a complete set. Blades are supplied only as a pre-balanced set and the
replacement of individual blades may void the warranty by causing mechanical damage to the motor, excessive
noise or premature wear.
19. Do not use outdoors where the fans could be directly exposed to water or moisture. Incorrect installation can be
dangerous and will void the warranty.
Please Note: Nothing in this manual is intended to instruct or assist untrained or
unqualied persons to install this product. Additionally, it is the responsibility of the
installer and user to apply common sense and care at all times.
Please note: Minor design changes may result in slight variations between the product illustrations and the fan contained within the packaging.
National Warranty Hotline|1300 116 305 Monday to Friday 9am to 5pm AEST 2
LOCATION AND INSTALLATION REQUIREMENTS
Provide adequate clearance from the oor. The lowest point on the
fan blades must be at least 2.1m (7 feet) from oor level in Australia
and at least 2.3m from oor level in the European Union and afliated
countries.
Make sure that the chosen location of the fan will not allow the rotating
fan blades to come into contact with any objects.
Ensure ceiling joists are sound and of adequate size and strength to
support a 25Kg (55lb) load.
To reduce the risk of re, electrical shock or personal injury, ensure
that the fan mounting bracket is supported directly from the building
structure. DO NOT mount to an outlet box.
The mounting bracket must be rmly screwed to a load bearing structure e.g. a concrete ceiling, steel structure or
timber frame. If a timber frame is to be added it must be securely nailed or screwed between two beams.
After the fan is completely installed, check to make sure that all connections are secure to prevent the fan from falling
and/or causing damage or injury.
To reduce the risk of personal injury, do not bend or damage the motor or Fan Assembly when handling or during
installation.
Please ensure special care is taken when assembling the fan. Each screw must be sufciently tightened.
TABLE OF CONTENTS
Fan assembly & parts list ........................................................
Installing hanger bracket ........................................................
Installing fan blades ...............................................................
Installing fan wall controller & Canopy......................................
Installing the optional light kit & Summer Winter Mode switch....
Summer and Winter Mode Explained........................................
Wiring Diagram.......................................................................
Balancing Troubleshooting & Safety Guidelines..........................
Troubleshooting......................................................................
General maintenance & cleaning..............................................
Ceiling fan warranty information...............................................
Not covered by warranty & Electrician Checklist.........................
Documents to retain for future warranty claims.........................
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
minimum
2100mm
Floor Level
Ceiling

Specyfikacje produktu

Marka: Calibo
Kategoria: Wentylator
Model: Breeze Silent AC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Calibo Breeze Silent AC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Calibo

Calibo

Calibo Enviro Instrukcja

24 Września 2024
Calibo

Calibo Breeze Silent AC Instrukcja

24 Września 2024
Calibo

Calibo Alula Instrukcja

24 Września 2024
Calibo

Calibo Bulimba Instrukcja

24 Września 2024
Calibo

Calibo CloudFan Instrukcja

24 Września 2024
Calibo

Calibo Breeze Silent DC Instrukcja

24 Września 2024
Calibo

Calibo Profile DC Instrukcja

24 Września 2024
Calibo

Calibo Ascot Instrukcja

22 Września 2024
Calibo

Calibo Storm Instrukcja

20 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

Windmill

Windmill FC07W3 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W1 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W2 Instrukcja

21 Grudnia 2024
Windmill

Windmill FC07W5 Instrukcja

21 Grudnia 2024
SVAN

SVAN SVP401600MOBA Instrukcja

21 Grudnia 2024
NewAir

NewAir NFN12AWH00 Instrukcja

20 Grudnia 2024
NewAir

NewAir AF-600 Instrukcja

20 Grudnia 2024
Livoo

Livoo DOM510 Instrukcja

20 Grudnia 2024
SVAN

SVAN SVP401600OBA Instrukcja

20 Grudnia 2024
Yamazen

Yamazen FCR-D408 Instrukcja

19 Grudnia 2024