Instrukcja obsługi Buderus Logano G115 WS

Buderus kocioł i podgrzewacz wody Logano G115 WS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Buderus Logano G115 WS (2 stron) w kategorii kocioł i podgrzewacz wody. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

For heating contractors

Please read carefully prior

to installation and servicing.

Caution!

Observe the safety instructions of this installation

and maintenance manual before placing the boiler

in operation.

Danger!

If installation, adjustment, modification, operation or

maintenance of the heating system is carried out by

an unqualified person, this may result in danger to

life and limb or property damage.

The directions of this installation and maintenance

manual must be followed precisely.

Contact a qualified service company or service pro-

vider if support or additional information is required.

Caution!

The operating manual is a component of the techni-

cal documentation and must be handed over to the

operator of the heating system.

Discuss the content of this manual with the owner

or operator of the heating system to ensure that

they are familiar with all information required for

operation of the heating system.

Installation and Service

Instructions

Low-temperature

oil boiler

6 720 804 872-00.1T

Logano G115 WS US/CA

6 720 804 872 - 2012/10 US/CA

Contents

Logano G115 WS US/CA - Technical specifications are subject to change without prior notice.

Contents

1 Safety Considerations and Symbol Descriptions 3

1.1 Regarding this Manual 3

1.2 Explanation of symbols 3

1.3 Observe the following Symbols 3

1.3.1 Installation Guidelines 4

1.3.2 Boiler Room Guidelines 4

1.4 Tools, Materials and Accessories 4

1.5 Disposal 4

2 Product description 5

2.1 Intended use 5

2.2 Certification and testing mark 5

2.3 Notes on installation and operation 5

2.4 Heating system water quality 5

2.5 Product description 6

2.6 Pack contents 7

2.7 Dimensions Specifications 8

2.7.1 Logano G115 WS dimensions 8

2.8 Conditions for operation 9

2.8.1 General operating conditions 9

2.8.2 Conditions for the boiler room and the environment 10

2.8.3 Combustion air supply conditions 10

2.8.4 Conditions, Fuel 10

2.8.5 Conditions power supply 11

2.8.6 Conditions for hydraulic system and water quality 11

3 Moving the boiler 12

3.1 Reducing boiler weight for transportation purposes 12

3.2 Lifting and carrying the boiler 13

3.3 Using transportation aids to transport the boiler 13

4 Installing the boiler 14

4.1 Wall clearances 14

4.2 Reversing boiler door 15

4.3 Mounting the adjustable feet (included with B-kit) 16

4.4 Positioning and leveling the boiler 16

5 Installing the boiler 17

5.1 Flue pipe installation 17

5.1.1 Chimney venting 17

5.2 Fitting the water connections 19

5.2.1 Fitting the B-kit 19

5.2.2 Installation of boiler drain (included in B-Kit) 20

5.2.3 Installing system components 20

5.3 Filling the heating system and checking for leaks 21

5.4 Mounting the burner 23

5.5 Connecting the fuel supply 23

5.6 Aquasmart installation 24

5.7 Blocked vent switch (required in Canada) 24

5.8 Electrical connections 24

5.8.1 Fitting the controls 25

5.8.2 Fitting temperature sensor assembly and burner cable 26

5.8.3 Connecting the power supply and additional components 27

5.8.4 Fitting cable ties 27

5.9 Fitting outer casing panels 27

6 Commissioning the heating system 28

6.1 Bringing the system up to operating pressure 28

6.2 Checking the safety valve 28

6.3 Checking position of heat exchanger baffles 29

6.4 Preparing the heating system for operation 29

6.5 Starting up the control and the burner 29

6.6 Notes on commissioning the burner 30

6.7 Raising flue gas temperature 30

6.7.1 Adjusting the position of heat exchanger baffles 31

6.7.2 Removing heat exchanger baffles 31

6.7.3 Removing the heat exchanger barrier plate 32

6.8 Manual reset high limit (STB) 32

6.9 Installing the burner door jacket 32

6.10 Commissioning log 33

7 Shutting down the heating system 34

7.1 Shutting down normally 34

7.2 Shutting down the heating system in an emergency 34

7.2.1 What to do in an emergency 34

8 Heating system servicing 35

8.1 Why is regular maintenance important? 35

8.2 Preparing the boiler for servicing 35

8.3 Cleaning the boiler 36

8.3.1 Cleaning the boiler with brushes 36

8.3.2 Wet cleaning (chemical cleaning) 37

8.4 Checking heating system operating pressure 37

8.5 Testing relief valve 38

8.6 Servicing and maintenance logs 39

9 Troubleshooting 42

10 Installation examples 43

11 Parts lists 45

12 Circuit diagrams 50

Index 56

Specyfikacje produktu

Marka:	Buderus
Kategoria:	kocioł i podgrzewacz wody
Model:	Logano G115 WS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Buderus Logano G115 WS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kocioł i podgrzewacz wody Buderus

Buderus 800-29 Instrukcja

24 Maja 2024

Buderus 600-24C Instrukcja

22 Maja 2024

Buderus 600-19S Instrukcja

19 Maja 2024

Buderus Logano G115 WS Instrukcja

17 Maja 2024

Buderus 600-24S Instrukcja

6 Maja 2024

Instrukcje kocioł i podgrzewacz wody

Najnowsze instrukcje dla kocioł i podgrzewacz wody

Noveen PTL 1002 Instrukcja

24 Września 2024

Noveen IWH360 Instrukcja

24 Września 2024

Noveen PTL 1001 Instrukcja

24 Września 2024

Kunft DSZF15-LJ/80Y6A Instrukcja

20 Września 2024

Eldom Favourite WH05039L Instrukcja

15 Września 2024

Eldom SF82 Instrukcja

15 Września 2024

Mission Air Hydro Flow Instrukcja

15 Września 2024

Mission Air Hydro Flow 3.3 kW Instrukcja

15 Września 2024

Mission Air Hydro Bath 18 kW Instrukcja

15 Września 2024

Edilkamin GORA2 SLIM UP Instrukcja

10 Września 2024