Instrukcja obsługi BT Video Baby Monitor 6800

BT Niesklasyfikowane Video Baby Monitor 6800

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BT Video Baby Monitor 6800 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Getting set up
1. Plug the cable into the parent unit, then plug it
into the mains power socket and switch the socket
on. Please use power supply unit item code 089010
(BLJ06W050100P1-B).
2. Leave to charge for .12 hours
Tip
The first time you use the parent unit, or if you
haven’t used it for a long time, it’ll take 12 hours
to fully charge.
The battery life on a single charge lasts for 4
hours. We recommend you keep the cable
plugged into the mains power socket if you’re
going to use for longer than this or throughout
the night.
When the battery gets very low, it’ll take about 30
minutes to charge enough for you to use it for a
short time. To charge the parent unit in the shortest
amount of time, turn it off while it’s charging.
3. Place the baby unit near a power socket in the
room where you’re going to be monitoring your baby
most of the time. It should also be at least one metre
away from your baby.
4. Plug the cable into the baby unit, then plug it into
the mains power socket and switch the socket on.
Please use power supply unit item code 089010
(BLJ06W050100P1-B).
5. Slide the
On
Off
button on the side of the baby
unit up to turn it on.
Tip
Keep the power cord out of baby’s reach by
looping any extra length and securing it.
Link
6. After the parent unit has charged for 12 hours you
can switch it on.
Before you do, move the parent unit at least one
metre from the baby unit. Any closer and you might
get audio feedback sounds.
Press the button and hold for 2 seconds to turn
the parent unit on.
The parent unit and baby unit are automatically
linked so they are now ready to use.
What’s the range?
The maximum range between your parent and
baby units is about 250 metres outdoors and
about 50 metres indoors. Thick walls and doors
reduce the units’ range and affect how they link
to each other.
Mic
Menu
OK
Talk
Video Baby
Monitor 6000
User guide
© British Telecommunications plc 2020.
We’re registered in England at 81 Newgate Street,
London, EC1A 7AJ, UK (company number 1800000).
* Calls to our helpdesk made from the UK mainland and
mobile networks are free. International call costs vary.
Video Baby Monitor 6000 UG (07/20) Issue 7
Available in other formats including braille,
large print or audio CD. If you would like a
copy, please call 0808 100 6554*.
Other information
Radio transmission information
Frequency range (GHz) 2.415– 2.471
Max power (dBm) 19.1
Radio Equipment Directive
Declaration of Conformity and
Power Efficiency Info
Hereby, British Telecommunications
plc declares that the radio equipment
type VBM6000 (088306) is in 
compliance with Directive 2014/53/
EU. The full text of the EU declaration
of conformity and power efficiency
information is available at:
bt.com/producthelp
This device has been evaluated for
and shown compliant with European
Guidelines when installed and
operated with a minimum distance
of 16mm between the unit and your 
body.
The item code for both power supply
units is 089010 (BLJ06W050100P1-B).
The full text of the EU declaration of
conformity is available at the following
internet address: bt.com/producthelp
Disposing of your old electrical
and electronic equipment
The Government has a
legal requirement to minimise the
unsorted waste disposal of electrical
and electronic equipment and to
maximise its separate collection and
environmentally sound management.
The symbol shown here and on the
product, means you shouldn’t throw it
in your normal rubbish at the end of its
working life.
This product may contain substances
that could be harmful to people or
the environment if it’s not recycled
correctly. Check with your retailer
to find out how to recycle your old
equipment, or if you’ve bought
something from us that has the
crossed out wheelie bin symbol on
it and it’s similar to the kit you don’t
need any more, you can send us your
old kit and we’ll get rid of it in an
environmentally friendly way.
Here’s the address: WEEE Take
Back Scheme, BT Returns,
BT DF, Darlington Road,
Northallerton, DL6 7ZY.
Website address: bt.com/weee
We’re not responsible for the costs
of returning items. If you don’t wish
to return kit to us, lots of electronics
shops have their own ‘take back’
schemes where you can recycle very
small electrical and electronic goods.
If you’re a household user, you can also
take  it to your local recycling centre – 
go to recyclenow.com to find the one
nearest to you. Please dispose
of this carefully and help to protect
our planet.
Important safety and care instructions
Keep for future reference
Your Video Baby Monitor 6000 from 
BT is manufactured to comply with
European safety standards. Please
read the following instructions
carefully before installing and using it.
Installation and location
• For indoor use only in UK and Ireland.
• Position all parts away from heat and sun
(e.g. away from radiators, window sill or
other electrical equipment which can
get hot).
• Keep area ventilated (e.g. don’t put
in cupboards or back of sofas) and
don’t block any vents with objects or
thick carpets.
• Keep device and cables out of young
children’s reach – at least one metre away. 
And never place any parts inside a cot,
bed or playpen.
• Only use power adapters provided by
BT for this specific device; contact our
helpdesk if you need a replacement.
• Electronic devices hate liquids; don’t place
devices and power adapters in damp areas
or near sources of water or splashes.
• Product may cause scratches or marks if
placed on fragile surfaces (e.g. veneered
wood or delicate fabrics); place on a mat
if required.
• Designed for use at room temperatures
between 0 and 40°C.
• Don’t use near flammable substances or in
a flammable atmosphere (e.g. warehouse
or garage).
• This device uses wireless technology; check
before using or installing where restrictions
may apply such as in hospitals.
Care and maintenance
• Treat all parts with care; no shock or
vibration, and don’t pull or twist any cables.
• Regularly check your product for damage
to ensure small parts aren’t exposed.
• Dust with a soft dry cloth (a microfibre
cloth for the lens); do not use water,
chemicals or solvents.
• Regularly check that objects don’t cover
any parts or any vents that could cause
overheating.
• When not in use, store in a dry place and
away from extreme heat or cold.
Warnings
• If any parts of your product or any cables
appear damaged, discontinue use
immediately. Switch off your electrical
socket if it is safe to do so and contact our
helpdesk. See terms in the Guarantee
section of the user guide.
• Don’t try to open your devices or power
adapters. There are no serviceable parts
and you risk an electrical shock.
• This product is designed as just an aid. It
isn’t a substitute for responsible
adult supervision.
• When used to monitor property, this
product isn’t a substitute for insurance
or appropriate measures to safeguard
your property.
•  You must have permission and comply 
with applicable laws if you want to use
your camera in places where it may affect
someone else’s property or privacy.
• If you’ve got a pacemaker please check
with your doctor before installation.
• If the temperature is not appearing or
shows as 0°C/32°F on the display of 
your parent unit, it may indicate a loose
temperature sensor. Please get in touch
with our helpdesk to discuss a
replacement unit.
Battery safety information
• The battery can’t be removed or replaced.
If you need repairs, get in touch with our
helpdesk.
• Take care when disposing of your product.
The battery could explode if placed in a
fire, a hot oven or is crushed or cut.
• Don’t subject the product to extremely low
air pressure as the battery may explode or
leak flammable liquid or gas.
Start here
Troubleshooting
Can I add another camera unit to
this bundle?
• BT currently does not sell add-on
camera units. A brand new bundle
will need to be purchased.
My parent unit / baby unit isn’t
working, what should I do?
• Please ensure the parent unit is
fully charged or plugged into
the mains.
• Ensure both parent unit and baby
unit are switched on.
• Move the parent unit closer to the
baby unit and away from large
obstructions or other electrical
devices as these may affect the
signal between the two units.
• Switch the baby unit off, and wait
for about 15 seconds and then
switch back on again.
Why can I hear a high-pitched noise?
• This is likely to be caused by the
units being too close to each other.
We recommend they are kept at
least 1 metre apart and preferably
in different rooms.
Why is my parent unit beeping?
The parent unit only beeps when:
• The baby unit is switched off and
there is no connection to the
parent unit.
• The units are too far apart, please
move them closer (but not closer
than one metre).
• The battery on the parent unit is
low, please plug into the mains.
• Interference may be causing
connection issues, please ensure
both devices are moved away from
other electrical devices (TV’s,
Microwaves, mobile phones etc.).
Why is the parent unit not making
any sounds even though there’s noise
from my baby’s room?
• Please ensure both units are
plugged into the mains or that the
parent unit is fully charged.
• The speaker may either be on mute
or the volume is too low to hear.
• The parent unit may be out of
range of the baby unit, please
move closer (but keep at least 1
metre apart to avoid interference).
In this scenario the parent unit
would beep to inform you of
this issue.
• Large metal obstructions and
other electrical devices may be
impacting the signal. Try relocating
both devices if possible.
Guarantee
Your VBM6000 is guaranteed for 
2 years from when you bought it. This 
means we’ll either repair it or replace
all or part of the product if it’s not
working properly.
If you bought the product more than
28 days ago, we might replace it with a 
refurbished or repaired one.
Guarantee conditions
• The guarantee only covers problems
found in the 2 year guarantee period.
•  You’ll need your receipt or other proof  
of purchase.
•  Your product is returned to BT or one of 
our partners as instructed.
• This guarantee doesn’t cover any
problems caused by accidents, misuse,
fair wear and tear, neglect, tampering
with the equipment, or any attempt
at adjustment or repair other than
through approved agents.
• The guarantee is valid within the UK and
Ireland only. You’re responsible for the 
cost of returns to the original retailer
or repair agent. If BT needs to provide
replacement parts, these can only be
despatched to an address within the UK
or Ireland.
• This guarantee doesn’t affect your
statutory rights.
Within the 2 year guarantee period
Before returning your product,
please take a look at the Help
section beginning on page 1 or 
contact the Baby Monitor Helpline
on 0808 100 6554.
Additional answers to frequently
asked questions are available from
bt.com/producthelp. If the helpdesk
can’t fix the problem, they’ll let
you know how to get a repair or a
replacement. If you need to return
your product please pack it in the
original box if you still have it and
make sure you include all the parts
such as cables and power supplies.
You’ll also need a fault reference 
number from the helpdesk. This does
not affect your statutory rights.
Outside of the 2 year
guarantee period
If your product needs support after
the guarantee period has ended,
we recommend that you contact
BT’s recommended support agent
Discount Communications on
0800 980 8999.
To find out what to do if your product
is in or outside of the 2 year guarantee, 
please visit bt.com/producthelp
Set a reminder
You can set an alert to remind you of something you need 
to do, for example when your baby’s next feed is due.
You can set it for 2, 4 or 6 hours.
1. Press
Menu
, then press to display .
2. Press or to select the reminder time ( , or 2H 4H 6H),
then press OK to save. The will be displayed on the top
right of the screen.
3. To cancel the alert, select .
Set the screen to turn on and
off automatically
You can set the screen to turn on by pressing any button. 
On this setting, the screen will turn off automatically when
no button is pressed during 1, 3 or 5 minutes.
1. Press
Menu
, then press to display .
2. Press and to select , or minutes and press 1 3 5 OK .
3. To turn the screen back on at any time, press any button.
If you want to set the screen on all the time, set the screen
setting to off .
Turn sound activated screen mode on or off
When set to On, the screen will turn on if noise is detected
from the baby unit. If it’s set to Off, the screen will stay off
even if noise is detected. To use this feature, you need to
set the standby mode first to 1, 3 or 5 minutes as described
above.
1. Press
Menu
, then press to display .
2. Press or to select (for On) or (for Off) and
press OK .
3. To turn the screen back on at any time, press the .
Temperature sensor
The reading from the temperature sensor will be displayed
at the top of the parent unit screen.
To change the temperature display from C to F:
1. Press
Menu
, then press to display and press .
2. Press or to select or , then press .°C °F
Night vision
So that you can see your baby at night, the baby unit
automatically uses the light from its infrared LED lights to
capture images in a dark room. Because of that, it can only
show images in black and white. The icon will be displayed
at the top of the screen.
Other screen icon descriptions
In this section you’ll find out how to use your baby
monitor to make sure you get the best possible use
out of it.
To start using your baby monitor, you’ll need to turn both
units on. You’ll see where the Power buttons are located in 
the diagrams.
The features outlined below are all accessible through the
MENU which can be opened by pressing the
Menu
button,
using the and buttons to navigate, and to scroll
through the sub menus and OK to select the desired option.
To return to the camera feed, simply press the
Menu
button.
Monitoring volume and mute
There are 8 volume settings. The default is 4.
1. In monitor mode, press or to change the volume.
2. Press OK to confirm.
3. To turn the sound off completely, turn the volume down to 0.
will be displayed on top of the screen.
Screen brightness
There are 8 brightness levels. The default is 4.
1. When viewing the camera feed, press or to select the
brightness level.
2. Press
OK
to confirm.
Lullabies
There are 5 lullabies to choose from or you can play all 5
in sequence.
1. Press
Menu
and select .
2. Press or to choose the lullaby 1-5 or press to play all
five, then press OK .
3. Press or to select the volume from 1-3 and press OK
to save.
4. To stop the lullaby playing, select .
Talk Talk to your baby
To give your baby some words of comfort, press and hold
down Talk on the parent unit and speak into the parent unit’s
microphone. The icon will be displayed at the bottom right
corner. Release the button when you’ve finished speaking.
Pan/tilt and Zoom in/out
• To enter/exit the pan/tilt mode, press  OK . When in Pan/tilt 
mode, press , , , to move the image.
• To enter zoom mode, press
Menu
, then press to display ,
then press or to select the zoom level and press OK to
exit menu.
Power socket
Camera
Link
OnOff
Mic
Menu
OK
Talk
Temperature sensor
Get to know your Video Baby Monitor
Find out how your baby monitor works by familiarising yourself with the buttons and lights.
Sound level
display
LED lights
show the level
of sound being
detected from
the baby unit.
Power on
Press and hold to turn
the unit on and off.
Press once to switch
to standby mode.
Menu
Press to
open/exit the 
main menu.
Talk
Press and hold to
talk to your baby.
Speaker
MicrophoneDirectional pad
Press to move
left or right in the
menu or to increase
or decrease the
brightness level.
Directional pad
Press to scroll up
or down when
you’re in the menu.
Press to increase
or decrease the
speaker volume.
Power socket
OK
Press to select an
option in the menu.
Press to enter pan and tilt
mode, then use the arrows
to move the camera.
Charging/
battery light
Blue when mains
power adapter is on,
red when battery low.
Power on light
Green when parent
unit turned on.
(Remains green for one
minute while charging,
after the parent unit is
turned off).
Stand
Power on/off
Slide button up to turn
on and down to turn off.
Link button
The units are pre-linked.
(Link button used if re-link ever required).
Add camera Delete camera View camera
Signal strength
Baby unit switched on
Camera identification
number e.g. Camera 1
Sound on
Mute
Battery status
(Full battery shown,
scrolling when charging)
Using your Video Baby Monitor

Specyfikacje produktu

Marka: BT
Kategoria: Niesklasyfikowane
Model: Video Baby Monitor 6800

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BT Video Baby Monitor 6800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane BT

BT

BT Levio LWE180 Instrukcja

28 Września 2024
BT

BT Video Baby Monitor 6800 Instrukcja

28 Września 2024
BT

BT Levio LWE160 Instrukcja

28 Września 2024
BT

BT Levio LWE250 Instrukcja

28 Września 2024
BT

BT Youview DTR-T2110 Instrukcja

28 Września 2024
BT

BT Levio LWE140 Instrukcja

28 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024