Instrukcja obsługi BT Video Baby Monitor 3000

BT Elektroniczna niania Video Baby Monitor 3000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BT Video Baby Monitor 3000 (2 stron) w kategorii Elektroniczna niania. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

How to recycle your equipment

The symbol shown here and on the

product means that the product is

classed as electrical or electronic

equipment, so DO NOT put it in

your normal rubbish bin.

It’s all part of the Waste Electrical and

Electronic Equipment (WEEE) Directive to

recycle products in the best way – to be

kinder to the planet, get rid of dangerous

things more safely and bury less rubbish

in the ground.

You should contact your retailer or

supplier for advice on how to dispose

of this product in an environmentally

friendly way.

Radio Equipment Directive

Declaration of Conformity

Hereby, British Telecommunications plc

declares that the radio equipment type BT

Video Baby Monitor 3000 (088304) is in

compliance with Directive 2014/53/EU.

This device has been evaluated for

and shown compliant with European

Guidelines when installed and operated

with a minimum distance of 16mm

between the unit and your body.

The item code for both power supply

units is 089009 (BLJ06W050060P1-B).

The full text of the EU declaration of

conformity is available at the following

internet address: bt.com/producthelp

Radio transmission information

Frequency range 2415.375 –

2471.625MHz

Max power 89.54mW (19.52dBm)

General information

Welcome

Thanks for buying a BT Baby Monitor. You’ll soon

be able to relax knowing you can watch and listen

for your baby’s every breath, gurgle and wriggle.

But rst things rst. To get set up, just follow the steps

opposite. If you need any help, go to bt.com/producthelp

or give us a call on 0808 100 6554*.

Getting set up

Registered Oce: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000

Designed and produced by The Art & Design Partnership (ADP). Printed in China / Issue 5 / ADP12-17

Important safety notices

1. Your baby monitor is designed as just an aid.

It isn’t a substitute for responsible and proper

adult supervision.

2. Make sure all cables and units are out of your baby’s

reach – at least one metre away.

3. Never cover either unit, put them in moist places or

inside the cot, bed or playpen.

4. If you travel abroad, check the voltage on your unit’s

plugs match the local power output.

5. Do not take the product apart. If you need repairs,

get in touch with our helpdesk.

1 Plug the cable into the Parent unit, then plug it into the

mains power socket and switch the socket on.

2 Leave to charge for .12 hours

Tip

The rst time you use the Parent unit, or if you haven’t

used it for a long time, it’ll take 12 hours to fully charge.

When the battery gets very low, it’ll take about 30

minutes to charge enough for you to use it for a

short time.

To charge the Parent unit in the shortest amount of time,

turn it o while it’s charging.

3 Place the Baby unit near a power socket in the room

where you’re going to be monitoring your baby most of

the time. It should also be at least one metre away from

your baby.

4 Plug the cable into the Baby unit, then plug it into the

mains power socket and switch the socket on.

5 Slide the

Oﬀ

button on the side of the Baby unit

up to turn it on.

Tip

Keep the power cord out of baby’s reach by looping any

extra length and securing it.

Link

Troubleshooting

My Parent/Baby unit isn’t working. What should I do?

Check that:

1 power cables are plugged in and switched on at the

wallsocket

2 the Baby unit is plugged in and the Parent unit battery

is fully charged (for 12 hours)

3 both units are turned on

4 the Parent unit isn’t too far from the Baby unit (large

obstructions or other electrical devices might aect the

signal between the Parent and Baby unit).

5 unplugging the power cables, waiting about 15 seconds,

and then plugging them back in can help.

My Parent/Baby unit is making a high-pitched noise.

Whatshould I do?

The units might be too close together. Make sure they’re

at least one metre apart, even when you’re using the

button.

Why is my Parent unit beeping?

The Parent unit beeps when:

• the Baby unit is turned o

• the units are too far apart – try moving them closer

together (but not closer than one metre)

• the battery in the Parent unit isn’t charged – try charging

it for 12 hours

• Other electronic items, like TVs and mobile phones, are

causing interference – try moving the Baby unit away

from things like that.

Why is the Parent unit not making any sounds even

though there’s noise coming from my baby’s room?

• the Parent unit might not be fully charged – make sure

it’s charged (for 12 hours).

• the speaker volume might be switched o.

• the Parent unit might be out of range of the Baby unit –

try moving it closer (but not closer than one metre).

• large obstructions or other electrical devices might

be aecting the signal between the Parent and Baby

units). Try moving the Baby unit away from obstructions,

including electrical appliances like TVs or mobile phones.

6 After the Parent unit has charged for 12 hours you can

switch it on.

Before you do, move the Parent unit at least one metre

from the Baby unit. Any closer and you might get audio

feedback sounds.

Press the button and hold for 2 seconds to turn the

Parent unit on.

The Parent and Baby unit are automatically linked so

they are now ready to use.

What’s the range?

The maximum range between your Parent and Baby

units is about 250 metres outdoors and about 50 metres

indoors. Thick walls and doors reduce the units’ range

and aect how they link to each other.

Guarantee

Your Video Baby Monitor 3000 is

guaranteed for a period of 24 months

from the date of purchase.

Subject to the terms listed below, the

guarantee will provide for the repair of,

or at BT’s or its agent’s discretion the

option to replace the Video Baby Monitor

3000, or any component thereof, which

is identied as faulty or below standard,

or as a result of inferior workmanship or

materials. Products over 28 days old from

the date of purchase may be replaced

with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to

defects that occur within the 24 month

guarantee period.

• Proof of purchase is required.

• The equipment is returned to BT or its

agent as instructed.

This guarantee does not cover any faults

or defects caused by accidents, misuse,

fair wear and tear, neglect, tampering

with the equipment, or any attempt at

adjustment or repair other than through

approved agents.

This guarantee does not aect your

statutory rights.

To nd out what to do, if your monitor is

in or outside of the 24 month guarantee,

go to bt.com/producthelp

Need some help?

Frequently asked questions are available online.

bt.com/producthelp

If you cannot nd the answer to your question online,

call our free Helpline. Our dedicated advisors are more

likely to be able to help you than the retailer where you

bought your baby monitor.

0808 100 6554*

This user guide is also available in other formats: large

print, Braille and audio CD. Call the helpline for a copy.

* Calls made from within the UK mainland network are free.

Mobile and international call costs may vary.

Video Baby Monitor 3000

User Guide

Link

OnOﬀ

Set a reminder

You can set an alert to remind you of something you need to do,

for example when your baby’s next feed is due. You can set it for

2, 4 or 6 hours.

1. Press , then press to display and press .

2. Press or to select the reminder time ( , or ), 2H 4H 6H

then press to save. The will be displayed on the top right

of the screen.

3. To cancel the alert, select .

Set the screen to turn on and o automatically

You can set the screen to turn on by pressing any button. On this

setting, the screen will turn o automatically when no button is

pressed during 1, 3 or 5 minutes.

1. Press , then press to display and press .

2. Press and to select , or minutes and press .1 3 5

3. To turn the screen back on at any time, press any button. If you want

to set the screen on all the time, set the screen setting . to o

Turn sound activated screen mode on or o

When set to On, the screen will turn on if noise is detected from the

Baby unit. If it’s set to O, the screen will stay o even if noise is

detected. To use this feature, you need to set the standby mode rst

to 1, 3 or 5 minutes as described above.

1. Press , then press to display and press .

2. Press and to select (for On) or (for O) and press .

3. To turn the screen back on at any time, press the .

Temperature sensor

The reading from the temperature sensor will be displayed at the top

of the Parent unit screen.

To change the temperature display from C to F:

1. Press , then press to display and press .

2. Press or to select or , then press .°C °F

Other screen icon descriptions

Power on/o

Slide button up to

turn on and slide

down to turn o.

Temperature

sensor

Get to know your Baby unit

Sound level display

LED lights show the level

of sound being detected

from the Baby unit.

Press and hold to turn

the unit on and o.

Press once to switch to

standby mode.

Press to open/exit

the main menu.

Press and hold to

talk to your baby.

Microphone

Press to increase or

decrease the speaker

volume, when in

normal mode (X1).

Press to move up or down

when in the zoom mode (X2).

Press to scroll up or down

when you’re in the menu.

Press to increase

or decrease the

brightness level, or

press to move left

or right when in the

zoom mode ( ).X2

Manual pan and tilt

Gently move

the camera to

adjust the angle.

Press to select

an option in

the menu.

Get to know your Parent unit

Stand

Lift and twist.

Speaker

Power socket

Camera

Power socket

Using the Parent unit

Turn on and o

Press and hold for 2 seconds to turn on and o.

Using the menu

• Press to open the main menu. Scroll through the menu options

using and . When the menu option you want is displayed,

press . Use or to scroll through the sub menus and press

to select.

• Press to exit the menu and return to the main monitoring screen.

Monitoring volume and mute

There are 8 volume settings.

1. In normal monitor mode ( ), press or to change X1

the volume.

2. Press to conrm.

3. To turn the sound o completely, turn the volume down to 0. will be

displayed on top of the screen.

Screen brightness

There are 8 brightness levels. The default is 4.

1. In normal monitor mode ( ), press or X1 to select the

brightness level.

2. Press to conrm.

Lullabies

There are 5 lullabies to choose from or you can play all 5 in sequence.

1. Press , is displayed, press .

2. Press or to choose the lullaby 1-5 or press to play all ve,

then press .

3. Press or to select the volume from 1-3 and press

to save.

4. To stop the lullaby playing, select .

Talk to your baby

To give your baby some words of comfort, press and hold down

on the Parent unit and speak into the Parent unit’s microphone.

The icon will be displayed at the bottom right corner. Release the

button when you’ve nished speaking.

Zoom in and out

1. Press , then press to display and press .

2. Press or to select the zoom level ( or ), then press X1 X2

to save.

3. Press to return to the main monitoring screen.

4. Whilst in X2 mode, press , or to move the image.,

5. To adjust the volume or screen brightness when in X2 zoom mode,

press and select the or option and press .

Charging/

battery light

Blue when mains

power adapter

is on, red when

battery low.

Power on light

Green when Parent

unit turned on.

(Remains green for one

minute while charging,

after the parent unit

is turned o).

Link button

The units are pre-linked.

(Link button used if re-link ever required).

Add camera Delete camera View camera

Using the Baby unit

Turn on and o

1. Slide the

Oﬀ

button on the side of the unit up to turn On and

press down to turn O.

Night vision

So that you can see your baby at night, the Baby unit automatically

uses the light from its infrared LED lights to capture images in a dark

room. Because of that, it can only show images in black and white.

The icon will be displayed at the top of the screen.

Signal strength

Baby unit switched on

Camera identication

number e.g. Camera 1

Oﬀ

Sound on

Mute

Battery status (Full battery shown,

scrolling when charging)

Specyfikacje produktu

Marka:	BT
Kategoria:	Elektroniczna niania
Model:	Video Baby Monitor 3000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BT Video Baby Monitor 3000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Elektroniczna niania BT

BT Pacifier Instrukcja

28 Września 2024

BT Video Baby Monitor 6000 Instrukcja

28 Września 2024

BT Video Baby Monitor 3000 Instrukcja

28 Września 2024

BT Video Baby Monitor 7500 Lightshow Instrukcja

28 Września 2024

BT Video Baby Monitor 2000 Instrukcja

28 Września 2024

BT 150 Instrukcja

28 Września 2024

BT 200 Instrukcja

12 Września 2024

Instrukcje Elektroniczna niania

Najnowsze instrukcje dla Elektroniczna niania

TrueLife NannyCam V24 Pro Instrukcja

9 Października 2024

TrueLife NannyCam H32 Pro Instrukcja

9 Października 2024

Denver ACT-324 Instrukcja

9 Października 2024

Denver DCA-4811 Instrukcja

8 Października 2024

Kogan KABBCMADDCA Instrukcja

7 Października 2024

Kogan KASMBMPT09A Instrukcja

7 Października 2024

Kogan KAFHDBABYCC Instrukcja

7 Października 2024

Kogan KAFHDBABYCD Instrukcja

7 Października 2024

Uniden BW4501 Instrukcja

7 Października 2024

Uniden BW2511 Instrukcja

7 Października 2024