Instrukcja obsługi BSS Audio Soundweb 9016

BSS Audio nieskategoryzowany Soundweb 9016

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BSS Audio Soundweb 9016 (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Installation Guide
SW9016 Video/Audio Matrix Switcher
Soundweb 9016 Installation Guide
2
Soundweb
TM
Important Safety Information - Read this carefully
This equipment has been tested and found to comply with the following
European and international Standards for Electromagnetic Compatibility and
Electrical Safety:
Radiated Emissions (EU): EN55013 (1996)
RF Immunity (EU): EN55013-2 (1996)
Electrical Safety (EU): EN60065+A11 (1998)
Electrical Safety (USA): UL6500/ETL (2000)
Electrical Safety (CAN): CAN/CSA-E65/ETLc (1994)
Before using the apparatus, read these instructions. Follow all instructions, heed
them and keep them in a safe place.
* Clean only with a damp cloth.
* Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
* Do not place objects filled with liquid on this apparatus.
* Do not defeat the safety purpose of the grounding type plug. A grounding plug has two
blades and a third grounding prong. The third prong is provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
* Protect the power cord from being walked upon or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.
* Only use attachments/accessories specified by the manufacturer.
* Unplug this apparatus during lightning storms or when not in use for a long time.
WARNING - TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE - REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS EQUIPMENT MUST BE EARTHED.
IT SHOULD NOT BE NECESSARY TO REMOVE ANY PROTECTIVE EARTH OR SIGNAL
CABLE SHIELD CONNECTIONS TO PREVENT GROUND LOOPS. ANY SUCH
DISCONNECTIONS ARE OUTSIDE THE RECOMMENDED PRACTICE OF BSS AUDIO
AND WILL RENDER THE EMC OR SAFETY CERTIFICATION VOID.
For continued compliance with international EMC regulations, it is important that all
cables be screened, and connected as follows:
•Audio cable screens to their 9016 connector ground.
•Control cable screens to the ground screws adjacent to the connector.
Soundweb 9016 Installation Guide
3
Soundweb
TM
Mechanical Installation
If the unit is likely to undergo extreme vibration through extensive road trucking and
touring, it must be supported at the rear and/or sides to lessen the stress on the front
mounting flange. Use either a ready-built rack tray or mount the 9016 unit between other
units. Damage caused by insufficient support is not covered by the warranty.
To prevent cosmetic damage to the front panel finish, use protective plastic cups under
the rack mounting bolts.
Error
Blinks when a malformed serial
message has been received, or an
error has occurred within the unit.
Power
When illuminated, indicates that the
power supply
is functioning.
Activity
Flashes when a command is
being processed.
User
The unit is operating at a user-
definable serial bitrate.
Front Panel LED Functions
Zone
The unit is operating in zone mode with no presets loaded into it. Voltages presented to the
control port switch stereo pairs of inputs to stereo pairs of outputs, with video following audio.
Preset
The unit is operating in preset
mode. Voltages presented to
the Z1 section of the
control port will recall
presets from memory.
Device A
The unit is addressed as device A.
Device B
The unit is addressed as device B.
Soundweb
The unit is operating at the correct
serial bitrate for connection to a
Soundweb unit (38400bps)

Specyfikacje produktu

Marka: BSS Audio
Kategoria: nieskategoryzowany
Model: Soundweb 9016

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BSS Audio Soundweb 9016, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany BSS Audio

BSS Audio

BSS Audio FDS-310 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio FDS-318 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio Soundweb 9008 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio Soundweb 9000 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio Soundweb 3088 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio DPR-402 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio FCS-966 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio FCS-960 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio MSR-602 Instrukcja

10 Sierpnia 2024
BSS Audio

BSS Audio FDS-355 Instrukcja

10 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024