Instrukcja obsługi BSS Audio FDS-310


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BSS Audio FDS-310 (40 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
FDS 310
User Manual
2
This equipment has been tested and found to comply with the following European Standards for
Electromagnetic Compatibility:
Emission Specification: EN55013 (1990) (Associated equipment)
Immunity Specification: EN50082/1 (1992) (RF Immunity, Fast Transients and ESD)
Mains Disturbance: EN61000/3/2 (1995)
For continued compliance ensure that all input and output cables are wired with cable screen connected to Pin
1 of the XLR. The input XLR Pin 1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good EMC compatibility.
V 2.0 JMK 9 August 1996
We have written this manual with the aim of helping installers, sound engineers and musicians to get to grips
with the FDS-310 and obtain its maximum capability.
If you are new to BSS products, we recommend that you begin at the start of the manual. If, however, you are
already familiar with the intended application, and just want to get the unit installed without delay, then
follow the highlighted sections.
We welcome any comments or questions regarding the FDS-310 or other BSS products, and you may contact us
at the address or World Wide Web site given in the warranty section.
3
Contents
Contents
1.0 What is a Crossover? 5
2.0 The difference between Active
and Passive Crossovers 6
3.0 Other advantages 7
4.0 The Linkwitz-Riley advantage 8
5.0 What is special about BSS
Crossovers? 9
6.0 Unpacking 9
7.0 Mechanical Installation 12
8.0 Mains Power Connection 13
9.0 Input Connections 14
9.1 Using Jack Plugs. 14
9.2 Using XLR Plugs. 14
10.0 Output Connections 15
10.1 Using Phone Plugs 15
10.2 Using XLR Plugs 15
11.0 Connection and Setup 16
11.1 Selecting '2-Way' 2 Channel Operation 16
11.2 Selecting '3-Way' Mono Operation 17
11.3 2-Channel Sub-Woofer Operation 18
13.0 Unusual Crossover Points -
for 3-way systems only 19
12.0 Monaural Sub-Woofer Operation -
for stereo 2-way systems only 19
14.0 How to Equalise CD Horns 20
15.0 Full range Output -
3-way operation only 21


Specyfikacje produktu

Marka: BSS Audio
Kategoria: nieskategoryzowany
Model: FDS-310

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BSS Audio FDS-310, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany BSS Audio

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024