Instrukcja obsługi Brother XL-2630

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother XL-2630 (52 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
6
5
4
3
2
1
Operation Manual
SEWING BUTTONHOLES
AND BUTTONS
BUILT-IN STITCHES
APPENDIX
USING ATTACHMENTS
AND APPLICATIONS
STRAIGHT AND
ZIGZAG STITCHING
KNOWING YOUR
SEWING MACHINE
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic safety precautions should always be taken, including the following:
Read all instructions before using.
DANGER - To reduce the risk of electric shock:
1. The machine should never be left unattended while plugged in. Always unplug the machine
from the electrical outlet immediately after using and before cleaning.
2. Always unplug the machine before you change the light bulb.
Replace the bulb with same type rated 15 watts.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is
used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, electrical or mechanical adjustment.
4. Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine and foot control free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn the machine switch to the symbol position which represents off, then {
remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.
14. Switch the machine to the symbol “{” position to turn it off when making any adjustments in the
needle area, such as threading needle, changing needle, threading bobbin, or changing presser
foot, and the like.
15. Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any other user servicing adjustments mentioned in the instruction manual.
16. This sewing machine is not intended for use by young children or infirm persons without
supervision. (For Australia and New Zealand only)
17. Young children should be supervised to ensure that they do not play with this machine.
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
1
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY
If this machine is fitted with a three-pin non-rewireable BS plug then please read the following.
IMPORTANT
If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut
off and an appropriate three pin plug fitted. With alternative plugs an approved fuse must be fitted in
the plug.
NOTE: The plug severed from the main leads must be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a fuse
approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug.
Always replace the fuse cover. Never use plugs with the fuse cover omitted.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED
WITH THE LETTER ‘E’, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND
YELLOW.
The wires in this main lead are coloured in accordance with the following code:
Blue Neutral
Brown Live
As the colours of the wiring in the main lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter
‘N’ or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the letter
‘L’ or coloured red or brown.

Specyfikacje produktu

Marka: Brother
Kategoria: Naaimachine
Model: XL-2630

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brother XL-2630, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Naaimachine Brother

Brother

Brother FS70WTx Instrukcja

26 Września 2024
Brother

Brother XL-2630 Instrukcja

26 Września 2024
Brother

Brother CS10s Instrukcja

21 Września 2024
Brother

Brother Boutique 37 Instrukcja

15 Września 2024
Brother

Brother RH137 Instrukcja

10 Września 2024
Brother

Brother LS2000 Instrukcja

7 Września 2024
Brother

Brother XM2701 Instrukcja

7 Września 2024
Brother

Brother PS-2400 Instrukcja

4 Września 2024
Brother

Brother XT5800 Instrukcja

4 Września 2024

Instrukcje Naaimachine

Najnowsze instrukcje dla Naaimachine