Instrukcja obsługi Brother TD-2125NWB

Brother drukarka TD-2125NWB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother TD-2125NWB (99 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/99
TD-2020A
TD-2125N
TD-2135N
TD-2125NWB
TD-2135NWB
Before using this printer, be sure to read this User's
Guide.
We suggest that you keep this manual in a handy
place for future reference.
Please visit us at support.brother.com, where you
can get product support and answers to frequently
asked questions (FAQs). Version 02
US ENG
USER’S GUIDE
i
Introduction
Thank you for purchasing the Brother TD-2020A/2125N/2135N/2125NWB/2135NWB.
The TD-2020A/2125N/2135N/2125NWB/2135NWB (hereafter referred to as “the printer”) is
a powered desktop thermal printer. Be sure to read the User’s Guide, Product Safety Guide,
Quick Reference Guide, Software User’s Guide, and Network User’s Guide (TD-2125N/2135N/
2125NWB/2135NWB only) before using the printer. We suggest that you keep these documents
in a secure place for future reference.
The following documents are available from our support site (support.brother.com):
User's Guide
Software User's Guide
Network User's Guide (TD-2125N/2135N/2125NWB/2135NWB only)
Symbols Used in This Document
The following symbols are used throughout this document.
CAUTION
This symbol indicates instructions that may result in injuries or damage if they are ignored or
incorrectly followed.
NOTE
This symbol indicates notes that provide information or directions that can help you better
understand and use the product more efficiently.
IMPORTANT NOTICE
For Windows 11 Users:
This printer supports Microsoft Windows 11.
All features in Windows 8.1 and Windows 10 are available in the Windows 11 environment and
work in a similar way.
This symbol indicates information or directions that should be followed.
Ignoring them may result in damage or failed operations.
ii
Trademarks
Apple, iPad, iPhone, and Safari are trademarks of Apple Inc., registered in the United States and
other countries.
Wi-Fi® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance®.
WPA™, WPA2™, WPA3™, and Wi-Fi Protected Setup™ are trademarks of Wi-Fi Alliance®.
Android and Google Chrome are trademarks of Google LLC.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use
of such marks by Brother Industries, Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those
respective companies.
iii
Table of Contents
1 Getting Started 1
General Description ...............................................................................................1
Power Supply.........................................................................................................3
Connecting to an AC Power Outlet..................................................................3
Installing the Printer Driver and Software ..............................................................3
Registering Paper Size Information With the Printer .............................................4
2 Printing 5
Operation Panel.....................................................................................................5
LED Indicators .................................................................................................5
Button Functions..............................................................................................6
Inserting the Media Roll .........................................................................................7
Checking the Sensor Position .........................................................................9
Cutting Roll Paper .........................................................................................10
Printing the Printer Setup Information..................................................................11
Connecting the Computer and Printer .................................................................13
USB Cable Connection..................................................................................13
Wired LAN Connection (TD-2125N/TD-2135N/TD-2125NWB/
TD-2135NWB only) ...................................................................................13
Wireless LAN Connection..............................................................................14
Without Using a Wi-Fi Router/Access Point (Wireless Direct).......................15
Using Infrastructure Mode and Wireless Direct Simultaneously....................16
Using Wi-Fi Protected Setup™ (WPS) ..........................................................16
Connect the Printer to a Computer Using a Bluetooth Connection ...............17
Printing.................................................................................................................18
Making Prints Lighter or Darker.....................................................................18
Printer Driver Options ..........................................................................................19
3 Printer Setting Tool 20
About the Printer Setting Tool..............................................................................20
Before Using the Printer Setting Tool ............................................................20
Using the Printer Setting Tool..............................................................................20
Communication Settings (TD-2125N/TD-2135N/TD-2125NWB/
TD-2135NWB only)...........................................................................................22
Settings Dialog Box .......................................................................................22
Menu Bar .......................................................................................................23
General Tab...................................................................................................24
Wired LAN/Wireless LAN Tabs (TD-2125NWB/TD-2135NWB only).............24
Wireless Direct Tab (TD-2125NWB/TD-2135NWB only)...............................26
Bluetooth Tab (TD-2125NWB/TD-2135NWB only) .......................................27
Applying Setting Changes to Multiple Printers ..............................................27
Device Settings....................................................................................................28
Settings Tabs.................................................................................................29
Menu Bar .......................................................................................................34
iv
P-touch Template Settings ..................................................................................35
P-touch Template ..........................................................................................35
P-touch Template Settings Dialog Box..........................................................36
Paper Size Setup.................................................................................................38
Paper Size Setup Dialog Box ........................................................................38
Distributing Paper Formats............................................................................41
4 Other Functions 42
Mass Storage Functions......................................................................................42
Mass Storage Feature...................................................................................42
Using the Mass Storage Feature...................................................................42
Change Printer Settings Using Web Based Management...................................43
Software Development Kit ...................................................................................44
5 Maintaining the Printer 45
Print Head Maintenance ......................................................................................45
Platen Roller Maintenance...................................................................................46
Media Exit Maintenance ......................................................................................46
Label Peeler (Optional) Maintenance (TD-2125N/TD-2135N/
TD-2125NWB/TD-2135NWB only) ...................................................................47
6 LED Indicators 48
LED Indicators .....................................................................................................48
7 Troubleshooting 50
Overview..............................................................................................................50
Troubleshooting Tips .....................................................................................50
Error Messages for Touchpanel Display (Optional)
(TD-2125N/TD-2135N/TD-2125NWB/TD-2135NWB only)........................58
8 Specifications 60
Product Specifications ......................................................................................... 60
Product Dimension ..............................................................................................62
9 Using the RJ25 to DB9M Serial Adapter
(Optional: PA-SCA-001) 64
Connecting the Computer and Printer With the RJ25 to DB9M Serial Adapter
....64
Product Specifications ......................................................................................... 64
10 Using the Touchpanel Display (Optional: PA-TDU-001)
(TD-2125N/TD-2135N/TD-2125NWB/TD-2135NWB only) 65
General Description.............................................................................................65
LCD .....................................................................................................................65
Main Screen ..................................................................................................65
v
Touchpanel ..........................................................................................................66
Information About Replacing the Touchpanel ...............................................67
Printing With the Touchpanel Display..................................................................68
Touchpanel Display Settings ...............................................................................69
Specifying Settings From the Touchpanel.....................................................69
Creating a Label Layout.......................................................................................73
Creating a Template ......................................................................................73
Linking a Database to a Template.................................................................75
Transferring the Label Layout to the Printer ........................................................77
Selecting the Touchpanel ..............................................................................78
Selecting the Data Assigned to Keys on the One-touchpanel .......................79
Creating a One-touchpanel ...........................................................................80
Printing the Label.................................................................................................80
Printing Using the Basic Control Panel..........................................................80
Printing Using the One-touchpanel................................................................82
Printing a Different Date/Time Than the Printer's Internal Clock ...................83
Printing Using a Barcode Reader ..................................................................84
Label Layouts on the Printer (Checking, Deleting and Log) ................................84
Replacing the Time/Date Battery.........................................................................85
Frequently Asked Questions................................................................................86
Product Specifications .........................................................................................87
11 Using the Label Peeler (Optional: PA-LP-001)
(TD-2125N/TD-2135N/TD-2125NWB/TD-2135NWB only) 88
Inserting the Media Roll .......................................................................................88
Printer Driver Settings ...................................................................................91
After Printing..................................................................................................92
Product Specifications .........................................................................................92
1
1
1
General Description 1
Front 1
1 POWER indicator
2 (Power) button
3 Media exit
4 Media Roll compartment top cover
5 STATUS indicator
6 (Feed) button
7 (Print) button
8 Cover release lever
9 Tear bar
• The Tear Bar Cover is attached to the printer.
NOTE
• Before using the printer, remove the Tear Bar
cover, as illustrated.
• Do not dispose of the removed cover.
To avoid injuries when the printer is not being
used, attach the cover to the Tear Bar.
CAUTION
The tear bar is sharp. To avoid injury, do not
touch the tear bar.
10 Print head
11 Transmissive/gap sensor
12 Media guide
13 Media tip guide
14 Media guide adjustment lever
15 Platen roller
16 Reflective/black mark sensor
Getting Started 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1116
Chapter 1
2
Back - TD-2020A 1
Back - TD-2125N/TD-2135N 1
Back - TD-2125NWB/TD-2135NWB 1
1 External media feed slot
2 Serial port
3 Power connector
4 Mini-USB port
5 USB host port (TD-2125N/2135N/2125NWB/
2135NWB only)
6 Ethernet network port (TD-2125N/2135N/
2125NWB/2135NWB only)
7 Wi-Fi® indicator (TD-2125NWB/2135NWB
only)
8 Bluetooth ® indicator (TD-2125NWB/
2135NWB only)
Optional Accessory: 1
RJ25 to DB9M serial adapter
(PA-SCA-001)
Optional Accessories:
(TD-2125N/2135N/2125NWB/
2135NWB only) 1
Touchpanel display (PA-TDU-001)
Label peeler (PA-LP-001)
1
3
2
4
2
3
4
5
6
1
2
7
3
4
8
5
6
1
Getting Started
3
1
Power Supply 1
This printer operates using the AC Adapter
(included).
The AC Adapter supplies power directly to
the printer, making it suitable for high-volume
printing.
Connecting to an AC Power
Outlet 1
aConnect the AC Adapter to the printer.
bConnect the AC power cord to the
AC Adapter.
cConnect the AC power cord to a nearby
AC power outlet (100 - 240 V,
50/60 Hz).
dPress the (Power) button to turn the
printer on. The POWER indicator lights
in green, and the printer is in standby.
1 AC Adapter
2 AC power cord
Installing the Printer
Driver and Software 1
Install the printer driver and software using
any of the following methods:
USB cable connection
Wired LAN connection (TD-2125N/
2135N/2125NWB/2135NWB only)
Wireless LAN connection
(TD-2125NWB/2135NWB only)
Bluetooth Connection
(TD-2125NWB/2135NWB only)
Go to support.brother.com to download
printer drivers, software, and manuals for
your printer, and to view FAQs.
Double-click the downloaded file and follow
the on-screen instructions to proceed with the
installation.
Be sure to unwrap all cords before
connecting them.
1
2
Chapter 1
4
Registering Paper Size
Information With the
Printer 1
The “Printer Setting Tool” allows you to
register the paper size information for
printing.
aMake sure the printer driver is installed
and you can print.
bConnect the computer to the printer with
a USB cable. This step is necessary
only initially to download the settings to
the printer.
cGo to the Printer Setting Tool and
select the [Paper Size Setup] option.
Specify the size information (label width
and length, label spacing, etc.) for the
media to be used, and then add the
paper format.
Settings can also be adjusted for
[Printing Reference Point
Adjustment] and [Energy Rank], and
[Import] or [Export] can be clicked to
perform the corresponding operations
with the added paper size information
list.
dTo register the paper size information
with the printer, in the Paper Size Setup
dialog box, click the Option button, and
then select Register Paper Size With
Printer. For more information, see
Paper Size Setup on page 38.
Chapter 2
6
Button Functions 2
(Power) Operation
Turn the printer on While the printer is turned off, press the (Power) button. The
POWER indicator turns on.
Turn the printer off While the printer is turned on, press and hold the (Power) button
until the POWER indicator turns off. (If the [Auto Power Off] function
is enabled in [Device settings] of the “Printer Setting Tool > Device
settings > Auto Power Off”, the printer turns off automatically after
the specified period of inactivity.)
(Feed) Operation
Feed the paper When the paper type is set to [Die-cut Label] or [Media With Marks]:
Press the (Feed) button to automatically feed the paper to the print
position.
When the paper type is set to [Continuous Length Tape]:
Press the (Feed) button to feed the paper about 1" (25.4 mm).
The default setting is [Continuous Length Tape].
Use [Paper Size Setup] in the “Printer Setting Tool” to register the
paper size information with the printer. For more information, see
Registering Paper Size Information With the Printer on page 4.
(TD-2125NWB/2135NWB only)
Switch the Wi-Fi, Bluetooth, or
both connections
To enable or disable the wireless LAN, Bluetooth, or both connection
enable/disable, press and hold the (Feed) button for five seconds.
(TD-2125NWB/2135NWB only)
Setting up Wi-Fi Protected Setup
(WPS)
To enable Wi-Fi Protected Setup (WPS), press and hold the (Feed)
button for ten seconds.
(Print) Operation
Perform the specified operation With the printer idle, press this button to perform the operation
specified in [Device settings] of the “Printer Setting Tool”. For more
information, see Print Key Function on page 30.
Print the printer setup information Make sure that a roll is installed, and then press and hold the (Print)
button for at least one second to begin printing the printer setup
information. For more information, see Printing the Printer Setup
Information on page 11.
Execute a file stored in the mass
storage area
With the printer in mass storage mode, press the (Print) button to
execute a command file stored in the mass storage area.
Reset the incrementing field Press and hold the (Print) button for at least five seconds, until the
POWER and STATUS indicators blink three times in orange.
Multiple buttons Operation
Start the printer in mass storage
mode
While pressing the (Print) button, press and hold the (Power)
button to start the printer in mass storage mode. For more information,
see Mass Storage Functions on page 42.
Printing
7
2
Inserting the Media Roll 2
aPress and hold the (Power) button to
turn the printer off.
Press the cover release lever (1) on
either side and lift to open the Media Roll
compartment top cover.
bOpen the media guides by lifting the
media guide adjustment lever (1) and
pulling the media guides outwards.
NOTE
The media guides are shipped fully open
from the factory.
cInsert the Media Roll into the Media Roll
compartment, and then close the Media
Roll compartment top cover.
For Media Roll
1Insert the Media Roll so that the
labels feed with the side to be
printed on facing up (1), as
shown.
We recommend using genuine Brother
Media Roll. Genuine Brother fanfold
media is not available at this time.
1
1
Use Media Rolls with an outer roll
dimension of 5" (127 mm) or less.
Use Media Rolls designed for TD
series printers. Regardless of the
size, some Media Rolls may not be
compatible.
Insert the Media Roll facing the
correct direction. If the Media Roll is
not inserted correctly, the printer will
not print on the correct side of the
paper or label.
When using media with the labels
rolled up on the inside, insert the roll
in the opposite direction of that
shown in sub-step 1 of step c so
that the print side of the labels will
face up.
1
Chapter 2
8
2While lifting the media guide
adjustment lever (1), push in
both media guides (2) to fit the
width of the paper.
3Feed the end of the Media Roll
under the media tip guides (1).
4Position the end of the paper
centered over the platen roller
and slightly out of the media
exit.
5Close the Media Roll
compartment top cover by
pressing it in the center.
Press down until it locks into
place.
For fanfold paper
1Insert the fanfold paper in the
direction shown.
1 Print side
1
2
1
1
Printing
9
2
2Feed the end of the fanfold
paper under the media tip
guides (1).
3Position the end of the paper
centered over the platen roller
and slightly out of the media
exit.
4Close the Media Roll
compartment top cover by
pressing it in the center.
Press down until it locks into
place.
dPress the (Power) button to turn the
printer on.
NOTE
If the paper size information for the die-cut
labels being used has been registered
with the printer, pressing the (Feed)
button will position the label at the correct
starting position. For more information,
see Registering Paper Size Information
With the Printer on page 4.
Checking the Sensor Position2
Check the sensor position for the type of
paper being used.
With die-cut labels that have no black
mark, the transmissive/gap sensor
detects the beginning of the label and
feeds the label to the correct position.
With receipt paper that has no black mark,
the reflective/black mark sensor detects if
paper has run out.
With media that has a black mark, the
reflective/black mark sensor detects the
mark and feeds the media to the correct
position.
1
With no black mark
Die-cut labels
Align on the sensor with on the printer.
(See Figure 1.)
Receipt paper
Width of 0.985"
(25 mm) or more
Align on the sensor with
on the printer. (See Figure 1.)
Width less than
0.985" (25 mm)
Align on the sensor with
on the printer. (See Figure 2.)
With a black mark
Align the black mark on the paper with the
centerline of the reflective/black mark sensor.
(See Figure 3.)
Make sure that there is at least 0.16" (4 mm) of
the black mark on the left and right of the
centerline for the reflective/black mark sensor.
Chapter 2
10
Figure 1 2
This is the sensor's default position.
Figure 2 2
Figure 3 2
1 Back of media
2 Black mark
3 0.16" (4 mm) or more
4 Centerline
5 Reflective/black mark sensor
NOTE
When using receipt paper with the
maximum width of 2.4" (63 mm), make
a black mark at least 0.35" (9 mm) long
in from either the left or right edge of the
paper so that the reflective/black mark
sensor can detect the black mark. If the
black mark is too short, it cannot be
detected by the reflective/black mark
sensor.
Cutting Roll Paper 2
Roll paper can be cut using the printer’s tear
bar. Pull one edge of the ejected paper up
and diagonally toward the other edge.
CAUTION
The tear bar is sharp. To avoid injury, do not
touch the tear bar.
1
2
3
4
5
Printing
13
2
Connecting the
Computer and Printer 2
Connect the printer to your computer using
any of the methods listed below.
USB cable connection
Wired LAN connection (TD-2125N/
2135N/2125NWB/2135NWB only)
Serial cable connection
Wireless LAN connection (TD-2125NWB/
2135NWB only)
Bluetooth connection (TD-2125NWB/
2135NWB only)
USB Cable Connection 2
aBefore connecting the USB cable, make
sure that the printer is turned off.
bConnect the printer end of the USB
cable to the mini-USB port on the back
of the printer.
cConnect the other end of the USB cable
to the USB port on the computer.
dTurn on the printer.
Wired LAN Connection
(TD-2125N/TD-2135N/
TD-2125NWB/TD-2135NWB
only) 2
Before connecting the printer to the
computer, install the printer driver from
your model's Downloads page at
support.brother.com .
To use a static IP address to
communicate through a wired LAN
connection you must first install the
printer driver and the Printer Setting
Tool and specify the wired LAN
connection settings. For more
information, see Installing the Printer
Driver and Software on page 3.
Printing
17
2
dPress the WPS button on your Wi-Fi
router/access point. When the
connection is established, the STATUS
indicator is lit in green.
For more information, see the instructions
provided with your Wi-Fi router/access point.
Both the POWER and the Wi-Fi indicators will
light in green when the connection is
established.
Computers and mobile devices that are on
the same network as the printer will have
access to the printer.
NOTE
If your computer or mobile device
supports the PIN authentication method,
select [PIN Code] for better security.
Connect the Printer to a
Computer Using a Bluetooth
Connection 2
Follow the manufacturer's recommendations
for your Bluetooth-equipped devices
(computers and mobile devices) or Bluetooth
adapter, and install any necessary hardware
and software.
aMake sure that the printer is turned off.
bSimultaneously press and hold the
(Print), (Feed), and (Power)
buttons until the POWER indicator and
STATUS indicators blink in green
alternately.
cRelease the (Feed) and (Print)
button (keep pressing the (Power)
button).
dYou can change the connection mode
by pressing the (Print) button (keep
pressing the (Power) button).
eTo set Bluetooth mode, release the
(Power) button when the STATUS
indicator is lit in green and the Bluetooth
indicator is lit in blue.
fUse your Bluetooth management
software to discover the printer. Select
the printer name (where XXXX is the last
four digits of the printer's serial number).
You can find the serial number label on
the base of the printer.
NOTE
• You can also change the printer’s
communication settings using the “Printer
Setting Tool”.
• If the passcode appears on the LCD while
connecting, check that it is the same as
that of the computer or mobile device, and
then press the OK button.
• We recommend setting a new Bluetooth
PIN code using the “Printer Setting Tool”
to protect your printer from unauthorized
access.
Chapter 2
18
Printing 2
There are various methods for printing with
this printer. The following describes the
procedure for printing from a computer.
aStart the P-touch Editor application, and
then open the document to be printed.
For more information on using P-touch
Editor, refer to the Software User’s
Guide on your model's Manuals page at
support.brother.com/manuals .
bMake sure the printer is connected to an
AC power outlet.
cTurn on the printer. The POWER
indicator lights in green.
1 POWER indicator
2 (Power) button
dConnect the printer to a computer.
For more information on the connection
methods and procedures, see
Connecting the Computer and Printer
on page 13.
eInsert the Media Roll.
For more information, see Inserting the
Media Roll on page 7.
We recommend to use genuine Brother
Media Roll.
fIf necessary, change the print settings
using either the printer driver or the
Printer Setting Tool instructions starting
on page 20.
gClick [Print] in the computer program’s
menu.
The POWER indicator blinks in green to
indicate that the printer is receiving data,
and the document prints.
Making Prints Lighter or
Darker 2
You can make prints lighter or darker by
adjusting the print density setting in the printer
driver’s dialog box or the “Printer Setting
Tool”. (See Print Density on page 30)
1
2
Printing
19
2
Printer Driver Options 2
You can configure various settings in the
printer driver’s dialog box, such as paper
size, number of copies, print quality, etc.
NOTE
You can also use the “Printer Setting
Tool” to configure more advanced
settings.
For more information, see Printer Setting
Tool on page 20.
20
3
About the Printer
Setting Tool 3
Use the Printer Setting Tool to specify the
printer’s communication settings, device
settings, P-touch Template settings, and
paper size settings from your computer.
The Printer Setting Tool is automatically
installed when you download and install
other software, including the printer driver,
from our support website.
Before Using the Printer
Setting Tool 3
Make sure the printer is connected to an
AC power outlet.
Make sure that the printer driver has been
installed and is functional.
Connect this printer to a computer using a
USB cable.
With this tool, settings cannot be specified
using a wired LAN, wireless LAN, or
Bluetooth connection.
Using the Printer
Setting Tool 3
aConnect the printer you want to
configure to your computer.
bLaunch the Printer Setting Tool.
For Windows 10:
From the Start menu, click Brother >
Printer Setting Tool.
For Windows 8.1:
Click the Printer Setting Tool icon in
the Apps screen.
1 Printer
Select the printer you want to configured.
If only one printer is connected, it is
unnecessary to make a selection since
only that printer will appear.
Printer Setting Tool 3
The Printer Setting Tool is available
only with compatible Brother printers.
Use the Printer Setting Tool to
configure the printer only when the
printer is in standby. The printer may
malfunction if you attempt to configure it
while printing.
3
2
4
5
6
1
Printer Setting Tool
21
3
2 Communication settings
For TD-2125N / TD-2135N /
TD-2125NWB / TD-2135NWB only:
Specify wired LAN settings.
For TD-2125NWB / TD-2135NWB only:
Specify wireless LAN, or Bluetooth
communication settings.
3 Device settings
Specify printer device settings, such as
power settings and print settings.
For TD-2125N / TD-2135N /
TD-2125NWB / TD-2135NWB only,
settings can also be specified using the
touchpanel.
4 P-touch Template settings
Specify P-touch Template settings.
5 Paper Size Setup
Add media information and settings to
the printer driver in order to use paper
sizes that may not be included in the
printer driver.
6 Exit
Closes the window.
cCheck that the printer to be configured
appears beside [Printer]. If a different
printer is displayed, select the desired
printer from the drop-down list.
dMake the settings changes you want.
For more information on settings, see
Communication Settings (TD-2125N/
TD-2135N/TD-2125NWB/
TD-2135NWB only) on page 22, Device
Settings on page 28, P-touch Template
Settings on page 35 or Paper Size
Setup on page 38.
eWhen finished, click Apply to apply the
new printer settings, and then click Exit.
fClick Exit in the main window to save
the printer settings.
You must log on as an administrator to
access [Communication settings].
You must log on as an administrator to
access [Device settings].
You must log on as an administrator to
access [Paper Size Setup].
Printer Setting Tool
23
3
Menu Bar 3
File Menu Options
• Apply Settings to the Printer
Applies the settings to the printer.
• Save Settings in Command File
Saves the specified settings in a command file.
The file extension is “.bin”.
The saved command file can be used with the
mass storage feature to apply the settings to a
printer. (See Mass Storage Functions
on page 42)
NOTE
If the [Disable these settings] check box is
selected, the settings in the tab will not be
saved.
• Import
Import from the current computer
wireless settings (TD-2125NWB/
2135NWB only)
Imports the settings from the computer.
NOTE
• Only personal security authentication settings
(open system, public key authentication, and
WPA/WPA2-PSK/WPA3-SAE) can be
imported. Enterprise security authentication
such as EAP-FAST settings cannot be
imported.
• If multiple wireless LANs are enabled for the
computer you use, the first detected wireless
settings (only personal settings) that are
detected will be considered for the import data.
• Only settings (communication mode, SSID,
authentication method, encryption mode, and
authentication key) from the [Wireless
Settings] pane in the [Wireless LAN] tab can
be imported.
Select a Profile to import
Imports the exported file and applies the
settings to a printer.
Click [Browse] and select the file you want
to import. The settings in the selected file
appear in the settings display/change area.
NOTE
• All settings except for node names can be
imported.
• Only profiles that are compatible with the
selected printer can be imported.
• If the imported profile’s IP address is set to
[STATIC], change the IP address of the
imported profile so that it does not duplicate the
IP address of an existing printer on the
network.
• Export
Saves the current settings in a file.
NOTE
If the [Disable these settings] check box is
selected, the settings in the tab will not be
saved.
The following information is not
saved with the settings commands:
• Node name
• IP address, subnet mask, and
default gateway (when the IP
address is set to [STATIC])
The saved communication settings
commands are intended to be used
only for applying settings to a
printer. The settings cannot be
applied by importing this command
file.
Saved command files contain
authentication keys and passwords.
Take necessary measures to
protect saved command files, such
as by saving them in a location that
cannot be accessed by other users.
Do not send the command file to a
different printer model.
Exported files are not encrypted.

Specyfikacje produktu

Marka: Brother
Kategoria: drukarka
Model: TD-2125NWB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brother TD-2125NWB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje drukarka Brother

Brother

Brother DCP-L1632W Instrukcja

11 Marca 2025
Brother

Brother HL-L1232W Instrukcja

11 Marca 2025
Brother

Brother MFC-L2880DW Instrukcja

10 Marca 2025
Brother

Brother DCP-T230 Instrukcja

11 Lutego 2025
Brother

Brother MFC-T930DW Instrukcja

11 Lutego 2025
Brother

Brother DCP-T430W Instrukcja

10 Lutego 2025
Brother

Brother DCP-T436W Instrukcja

13 Stycznia 2025
Brother

Brother DCP-9017CDW Instrukcja

10 Stycznia 2025
Brother

Brother DCP-L1630W Instrukcja

5 Stycznia 2025
Brother

Brother DCP-T530DW Instrukcja

2 Stycznia 2025

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

Phoenix Contact

Phoenix Contact Topmark Neo Instrukcja

5 Marca 2025
AgfaPhoto

AgfaPhoto Realipix Pocket P Instrukcja

27 Lutego 2025
AgfaPhoto

AgfaPhoto Realipix Mini P.2 Instrukcja

27 Lutego 2025
Evolis

Evolis KC Max Instrukcja

25 Lutego 2025
Evolis

Evolis KC Prime Instrukcja

25 Lutego 2025
Evolis

Evolis KC Essential Instrukcja

25 Lutego 2025
Evolis

Evolis KM500B Instrukcja

25 Lutego 2025
Unitech

Unitech ZD621R Instrukcja

21 Lutego 2025
Evolis

Evolis Badgy 101 Instrukcja

20 Lutego 2025
Canon

Canon Pixma G5040 Instrukcja

13 Lutego 2025