Instrukcja obsługi Brother DCP-B7600D
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother DCP-B7600D (2 stron) w kategorii faks. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Unpack the machine and check the components
Drum Unit Toner Cartridge
AC Power Cord Quick Setup Guide Product Safety Guide
1Remove the packing materials and install the toner cartridge and drum unit assembly
2Load paper in the paper tray
3Connect the power cord and turn the machine on
Back Front
NOTE:
•The components included in the box may differ depending on your country.
•The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for the
interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 metres long.
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
•The screens and images in this show the MFC-B7810DW.Quick Setup Guide
•Save all packing materials and the box in case you must ship your machine.
Remove the orange part.
Push firmly.
Do not exceed this mark.
4Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.
Remove the protective tape or film covering the machine and the supplies.
1
1
2
Adjust the paper
guides.
Quick Setup Guide
Read the for the correct installation procedure.Product Safety Guide Quick Setup Guidefirst,thenreadthis
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
EN
DCP-B7600DB / DCP-B7620DW / DCP-B7620DWB / DCP-B7640DW / DCP-B7640DWB /
MFC-B7810DW / MFC-B7810DWB / MFC-B7811DW
D02XKD001-00
ASA/GLF
Version 0
7Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen
instructions and
prompts.
setup.brother.com
Setup Finished
You can now print and scan
using your machine.
Can’t Connect? Check the following:
Restart your wireless access point
or router. If this is not possible, go
to the next step.
Disconnect the cable.
Wired network
USB connection
If still unsuccessful, go to .
If still unsuccessful, visit support.brother.com
for FAQs and Troubleshooting.
Restart your machine and
computer, and then go to .
8Manual wireless setup (Wireless models)
Find your SSID (Network Name) and Network
Key (Password) on your wireless access
point or router and write them in the table
provided below.
SSID (Network Name)
Network Key (Password)
If you cannot find this information, ask your
network administrator or wireless access
point or router manufacturer.
SSID: XXXXXXX
Network Key: XXXX
Go to to
install software.
If the setup is unsuccessful, restart your
Brother machine and your wireless access
point or router, and repeat .
If still unsuccessful, visit
support.brother.com.
•For DCP models:
Press and hold (or press repeatedly)
▲or▼toselectoneofthefollowing
characters:
0123456789abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~
When the wireless setup is successful, the
LCD displays .[Connected]
Important Notice for Network Security:
The default password to manage this
machine’s settings is located on the back of
the machine and marked “ ”. Pwd
We recommend immediately changing the
default password to protect your machine from
unauthorised access.
If the wireless setup is unsuccessful, set up the connection manually.
Wireless network
6
Connect the telephone line cord
(For MFC models only)
If you do not plan to use the fax feature on this machine, go to step .
Select the SSID (Network Name) for your
access point or router and enter the Network
Key (Password).
5
Select your language (if needed)
1. Press .Menu
2. Press▲or▼todisplay[Initial Setup], and then press .OK
3. Press▲or▼todisplay[Local Language], and then press .OK
4. Press▲or▼toselectyourlanguage,andthenpressOK.
5. Press .Stop/Exit
Press , and then select Menu
[Network] >
[WLAN(Wi-Fi)] >
[Find Network].
Follow the LCD instructions.
NOTE:
For Windows only, CD installation is also available (for
some countries).
For detailed machine information and product specifications, see the at support.brother.com/manuals. © 2023 Brother Industries, Ltd. All rights reserved.Online User's Guide
D02XKD001-00
Specyfikacje produktu
| Marka: | Brother |
| Kategoria: | faks |
| Model: | DCP-B7600D |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Brother DCP-B7600D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje faks Brother
8 Października 2024
8 Października 2024
4 Października 2024
4 Października 2024
1 Października 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
29 Września 2024
Instrukcje faks
- faks Samsung
- faks Sharp
- faks Philips
- faks Acer
- faks Panasonic
- faks Canon
- faks Toshiba
- faks Xerox
- faks Olivetti
- faks Ricoh
- faks OKI
- faks Sagemcom
- faks Sagem
- faks Belgacom
- faks Welltech
- faks Nashuatec
- faks Telekom
Najnowsze instrukcje dla faks
4 Października 2024
29 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
26 Września 2024