Instrukcja obsługi Broan Roomside AER110SLW

Broan Wentylator Roomside AER110SLW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Broan Roomside AER110SLW (11 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
© 2019 Broan-NuTone LLC
1102077C
AER110SLW
AERN110SLW
Model number:
Número de modelo:
INSTALLATION AND
USE & CARE INSTRUCTIONS
INSTRUCCIONES DE INSTALACIÓN,
USO Y CUIDADO
English - See page 2
Español - Consulte la página 9
Decorative Fan-Light
Ventilador con luz decorativo
ROOMSIDE SERIES
INSTALLATION AND USE & CARE INSTRUCTIONS
SAFETY
2
WARNING
To reduce the risk of fire, electric
shock, or injury to persons, observe the
following:
• Use this unit only in the manner
intended by the manufacturer. If
you have questions, contact the
manufacturer at the address or
telephone number listed in the warranty.
• Before servicing or cleaning unit,
switch power off at service panel and
lock the service disconnecting means
to prevent power from being switched
on accidentally. When the service
disconnecting means cannot be locked,
securely fasten a prominent warning
device, such as a tag, to the service
panel.
• Installation work and electrical wiring
must be done by a qualified person(s)
in accordance with all applicable codes
and standards, including fire-rated
construction codes and standards.
• Sufficient air is needed for proper
combustion and exhausting of
gases through the flue (chimney) of
fuel burning equipment to prevent
backdrafting. Follow the heating
equipment manufacturer’s guideline
and safety standards such as those
published by the National Fire
Protection Association (NFPA), and
the American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local
code authorities.
• When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
• Ducted fans must always be vented to
the outdoors.
• This unit must be grounded.
CAUTION
• For general ventilating use only. Do not
use to exhaust hazardous or explosive
materials and vapors.
• For installation in flat ceilings only.
• To avoid motor bearing damage and
noisy and/or unbalanced impellers, keep
drywall spray, construction dust, etc. off
power unit.
• Please read specification label on
product for further information and
requirements.
Register this product at www.nutone.com/register. For Warranty Statement, or to order Service Parts: go
to www.broan.com or www.nutone.com and type the model number in the “Model Search” field.
Broan, 926 W. State Street, Hartford, WI 53027 800-558-1711 888-336-3948
Installer: Leave this manual with the homeowner.
READ AND SAVE THESE INSTRUCTIONS
INSTALLATION AND USE & CARE INSTRUCTIONS
OPERATION
3
CLEANING & MAINTENANCE
For quiet and efficient operation, long life, and attractive
appearance - remove grille and vacuum interior of unit
with the dusting brush attachment.
The motor is permanently lubricated and never needs
oiling. If the motor bearings are making excessive or
unusual noises, replace the blower assembly (includes
motor and impeller).
OPERATION
The humidity control and fan can be operated
separately. Use a 1- or 2-function wall control. Do
not use a dimmer switch to operate the humidity
control.
SENSOR OPERATION
This humidity-sensing fan uses a sophisticated
humidity sensor that responds to: (a) rapid to
moderate increases in humidity or (b) humidity above
a set-point. The humidity sensor may occasionally
turn the fan ON when environmental conditions
change.
MANUAL ON WITH TIMED OFF
This humidity sensing fan has an additional operation
feature. For odor or vapor control, the fan can be
energized by cycling the power switch. Once the fan
has been energized in this manner, it will remain on
for the set timer period.
To manually energize the fan:
1. If fan power switch is already ON, proceed to
Step 2; otherwise, turn power switch ON for more
than 1 second.
2. Turn fan power switch OFF for less than 1
second.
3. Turn fan power switch back ON and fan will turn
ON.
50
60
80
70
10
560
15 40
20 30
50
%HUMIDITY MINUTES
% HUMIDITY ADJUSTMENT
%HUMIDITY has been factory set at 80% for most
shower applications. If fan is not responding to changing
humidity conditions, adjust toward 50%. If fan is
responding too often to changing humidity conditions,
adjust toward 80%. If fan is still responding too often at
80%, contact Broan Technical Support.
To adjust the %HUMIDITY:
1. Turn power off at electrical service panel.
2. Use a small screwdriver to carefully rotate
%HUMIDITY control to desired level.
3. Turn power on.
4. Repeat above steps if necessary.
MINUTES ADJUSTMENT (TIMER)
This humidity-sensing fan has a timer that controls how
long the fan remains on after (a) rise in humidity and
(b) humidity level are both below the user-adjustable
%HUMIDITY setting, or after being energized by cycling
power switch.
To adjust the timer:
1. Disconnect power at electrical service panel.
2. Use a small screwdriver to carefully rotate MINUTES
control to increase or decrease time.
3. Turn power on.
4. Repeat above steps if necessary.
Factory settings shown.
SENSOR CLEANING
The humidity sensor is mounted in the control housing. The
sensor will operate most reliably when cleaned occasionally
as follows:
1. Disconnect power at service entrance.
2. Remove the grille. Use a dry dustcloth, clean toothbrush,
or lightly vacuum to clean sensor and grille. DO NOT
USE ABRASIVE CLOTH, STEEL WOOL PADS, OR
SCOURING POWDERS.
3. DO NOT USE cleaning sprays, solvents, or water on or
near the sensor!

Specyfikacje produktu

Marka: Broan
Kategoria: Wentylator
Model: Roomside AER110SLW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Broan Roomside AER110SLW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wentylator Broan

Broan

Broan QTXE110S Instrukcja

1 Kwietnia 2025
Broan

Broan Ultra Pro RB110 Instrukcja

1 Kwietnia 2025
Broan

Broan QTXE150 Instrukcja

1 Kwietnia 2025
Broan

Broan Roomside AER110LBN Instrukcja

1 Kwietnia 2025
Broan

Broan AER80CCTK Instrukcja

1 Kwietnia 2025
Broan

Broan Roomside AER110SLW Instrukcja

1 Kwietnia 2025
Broan

Broan Flex AE50F1 Instrukcja

1 Kwietnia 2025
Broan

Broan 744L Instrukcja

1 Kwietnia 2025
Broan

Broan Roomside AER80LWH Instrukcja

1 Kwietnia 2025
Broan

Broan QTXE150FLT Instrukcja

1 Kwietnia 2025

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator

RYOBI

RYOBI RY40HF02 Instrukcja

2 Kwietnia 2025
Fantini Cosmi

Fantini Cosmi ASPIRKAPPA Instrukcja

1 Kwietnia 2025
Honeywell

Honeywell QuietSet 5 HYF260 Instrukcja

1 Kwietnia 2025
Honeywell

Honeywell Quietset Slim Mini HTF210 Instrukcja

1 Kwietnia 2025
PAX

PAX TSC 13 Instrukcja

1 Kwietnia 2025
DeepCool

DeepCool FT12-3 Instrukcja

1 Kwietnia 2025
Vornado

Vornado Strata 8T Instrukcja

31 Marca 2025
Casablanca

Casablanca Levitt 59436 Instrukcja

30 Marca 2025
Grunkel

Grunkel TurboFlow-DSG Instrukcja

30 Marca 2025
Soler & Palau

Soler & Palau CBT-N Instrukcja

29 Marca 2025