Instrukcja obsługi Brilliant 21459/05

Brilliant Deurbel 21459/05

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brilliant 21459/05 (4 stron) w kategorii Deurbel. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Wireless Kinetic Door Bell
21459/05
Before using your new Brilliant Smart Kinetic Door Bell, it is important that you read and follow these
instructions, even if you feel you are quite familiar with this type of product. Retain this document for
future reference.
Operating and Installation Instructions Wireless Kinetic Door Bell:
Specications:
Model: 21459/05
Colour: White
Power: Bell Press - Kinetic - Self Generated (no Batteries Required)
Chime/Receiver 240VAC 50Hz
Working Temperature: 5° °C~40
Volume Levels: 4 + Silent Mode
Noise Level: 80db at 1 meter
Chimes: 38
Operating Range: Upto 30 meters (depending conditions**)local
Radio Frequency: 433MHz
Warning:
Chime/Receiver not designed for outdoor use.
Failure to follow these instructions may result in damages to device and will void warranty.
This Product has no Serviceable parts.
Do not perform unauthorised modication to this device and or components.
If product is functioning irregularly, please TURN OFF the power, remove from power outlet
and contact Manufacturer
• –**Local conditions may interfere with range of frequency i.e. metal framed building, brick
wall, etc.
Chime Selection Button
Volume Level Button
Pairing/Activation
LED Indicator
Pairing/Activation
LED Indicator
1
Bell Press Chime/Receiver
*Note: Image’s may differ from actual product.
Wireless Kinetic Door Bell
21459/05
Bell Press:
To be placed at a suitable location preferably out of weather.
Attach the transmitter with enclosed double sided self adhesive tape and position on wall or
door. (Note: Do not attach to metal door or wall as this may interfere with RF signal).
Installation
Chime/Receiver:
To be installed indoors only (Note: not for outdoor use. Do not install in wet areas.
i.e. kitchen, bathroom)
Plug the receiver into a suitable 240VAC power socket and turn on.
Once powered on and activated, the receiver will chime once with factory set chime and LED
indictor will ash.
Chime Selection;
To select a dierent chime, press the Chime Selection Button once at a time to select your
desired chime. There are 38 dierent chimes to choose.
(Note: you can only move forward in the selection).
Volume Level:
The receiver has 4 volume levels. Press the Volume Level Button once at a time to select
desired volume level.
*Note: Image’s may differ from actual product.
2
*Note: Image’s may differ from actual product.
Wireless Kinetic Door Bell
21459/05
Silent Mode:
Activate Silent mode: long press Chime Selection Button for 8 seconds and release
when LED indicator light on Chime/Receiver stops ashing and stays constantly on.
De-activate Silent mode: long press Chime Selection Button for 8 seconds and release
when LED indicator light on Chime/Receiver stops ashing and stays constantly on.
2. Press the Bell Press once, the LED
indicator light on the Chime/Receiver
will go O, and the pairing will be
complete
Pairing:
The Bell Press and Chime/Receiver are already paired.
If more than one Bell Press or Chime/Receivers are required to be paired,
please follow the below steps
1. Long-press the Chime Selection Button
for 3 seconds and release when the LED
indicator light starts Flashing.
Removing Paired Device:
Pairing will be deleted by pressing the Chime Selection Button for 10 seconds until
the LED indicator light stops Flashing and stays constantly On.
Pairing/Activation
LED Indicator
Pairing/Activation
LED Indicator
3
*Note: Image’s may differ from actual product.

Specyfikacje produktu

Marka: Brilliant
Kategoria: Deurbel
Model: 21459/05

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brilliant 21459/05, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą