Instrukcja obsługi Bremshey Sport Orbit Control
Bremshey Sport
Zdatność
Orbit Control
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bremshey Sport Orbit Control (60 stron) w kategorii Zdatność. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/60
Control OWNER'S MANUAL P. 2-7
BETRIEBSANLEITUNG S. 8-13
MODE D'EMPLOI P. 14-19
HANDLEIDING P. 20-25
MANUALE D'USO P. 26-31
MANUAL DEL USUARIO P. 32-37
BRUKSANVISNING S. 38-43
KÄYTTÖOHJE S. 44-49
www.accellfitness.com
SERIAL NUMBER
SERIENNUMMER
NUMERO DE SERIE
SERIENUMMER
NUMERO DI SERIE
NÚMERO DE SERIE
SERIENNUMMER
SARJANUMERO
BR_Orbit_FD_Control_Manual_090324.indd 1 3/25/2009 9:33:50 AM
2
OWNER'S MANUAL • CONTORL
IMPORTANT SAFETY
INSTRUCTIONS
Read this guide through carefully
before assembling, using or servicing
your fitness equipment. Please keep
the guide somewhere safe; it will
provide you now and in the future with
the information you need to use and
maintain your equipment. Always follow
these instructions with care.
YOUR HEALTH
• Before you start any training, consult a
physician to check your state of health.
• If you experience nausea, dizziness
or other abnormal symptoms while
exercising, stop your workout at once
and consult a physician.
• To avoid muscular pain and strain,
begin each workout by warming up and
end it by cooling down (slow pedaling at
low resistance). Don’t forget to stretch at
the end of the workout.
EXERCISING
ENVIRONMENT
• The equipment is not to be used
outdoors.
• Place the equipment on a firm, level
surface. Place the equipment on a
protective base to avoid any damages to
the floor beneath the equipment.
• Make sure that the exercising
environment has adequate ventilation.
To avoid catching cold, do not exercise
in a draughty place.
• In training, the equipment tolerates
an environment measuring +10°C to
+35°C. The equipment can be stored
in temperatures ranging between
-15°C and +40°C. Air humidity in the
training or storage environment must
never exceed 90 %.
USING THE EQUIPMENT
• If children are allowed to use the
equipment, they should be supervised
and taught to use the equipment
properly, keeping in mind the child’s
physical and mental development and
their personality.
• Before you start using the equipment,
make sure that it functions correctly
in every way. Do not use a faulty
equipment.
• Press the keys with the tip of the
finger; your nails may damage the key
membrane.
• Never lean on the interface.
• Never remove the side covers. Do not
step on the frame casing.
• Only one person may use the
equipment at a time.
• Hold the stationary handlebar for
support when getting on or off the
equipment.
• Wear appropriate clothing and shoes
when exercising.
• Protect the meter from sunlight and
always dry the surface of the meter if
there are any drops of sweat on it.
• The equipment has been designed
for home use. The Bremshey Sport
warranty applies only to defects and
malfunctions in home use (24 months).
Further information on warranty terms
can be obtained from your national
Bremshey Sport distributor. Please note
that the warranty terms may vary from
one country to another.
• Please note that the warranty does
not cover damage due to shipping
or negligence of adjustment or
maintenance instructions described in
this manual.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .................... 2
ASSEMBLY ..............................................................50
EXERCISING .............................................................4
CONSOLE ..................................................................5
MAINTENANCE .........................................................7
TRANSPORT AND STORAGE...................................7
TECHNICAL SPECIFICATIONS .................................7
BR_Orbit_FD_Control_Manual_090324.indd 2 3/25/2009 9:33:50 AM
GB
3
OWNER'S MANUAL • CONTORL
• The equipment must not be used by
persons weighing over 135 kg.
• Make sure the equipment is unplugged
before carrying out any assembly or
maintenance procedures.
• Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipment and authorized under the
laws of the country in question to carry
out maintenance and repair work.
• This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER:
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or serviceman if you are
in doubt as to whether the product is
properly grounded. Do not modify the
plug provided with the product - if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
NOTE ABOUT SAFETY
FOR UNITS WITH
ELECTRICAL POWER
Before connecting the equipment to a
power source, make sure that the local
voltage matches that indicated on the
type plate: the equipment operates at
either 230 v or 115 v (north american
version). Note! The equipment must be
connected to a grounded wall socket.
Do not use extension wires when
connecting the equipment to the power
source. Always switch off the power and
unplug the equipment from the electrical
outlet immediately after using!
To reduce the risk of burns, fire, electric
shock or injury to persons:
1. The equipment should never
be left unattended when plugged in.
Unplug the equipment from the outlet
when not in use, before carrying out any
maintenance or repair procedures, and
before moving the unit.
2. Do not operate the equipment
under a blanket or other combustive
material. Excessive heating can occur
and cause fire, electric shock or injury to
persons.
3. Do not connect the equipment
to a power source, or operate the
equipment if there is any sort of damage
to the power cord or the unit itself.
4. Do not connect the equipment
to a power source or operate the
equipment outdoors or in damp
locations.
5. Keep the power cord away from
hot objects.
6. Do not route the power cord
beneath a carper or place any objects
on the cord. Also make sure that the
power cord does not run underneath the
equipment.
7. Do not alter (for example
lengthen) the cord between the
transformer and the unit.
NOTE ABOUT
ASSEMBLING THE
EQUIPMENT
Start by unpacking the equipment. The
detailed assembly instructions can be
found at the back of this guide. Follow
the instructions in given order.
Before assembly, check the contents of
the package. If a part is missing, please
contact your dealer with the model,
equipment serial no. and spare part no.
of the missing part. You’ll find a spare
part list at the back of this guide. The
hardware kit contents are marked with
* in the spare parts list. The directions
BR_Orbit_FD_Control_Manual_090324.indd 3 3/25/2009 9:33:51 AM
Specyfikacje produktu
| Marka: | Bremshey Sport |
| Kategoria: | Zdatność |
| Model: | Orbit Control |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bremshey Sport Orbit Control, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zdatność Bremshey Sport
25 Września 2024
20 Września 2024
Instrukcje Zdatność
- Zdatność Precor
- Zdatność Tunturi
- Zdatność Denver
- Zdatność Domyos
- Zdatność BH Fitness
- Zdatność VirtuFit
- Zdatność Flow Fitness
- Zdatność Joy Sport
- Zdatność Motive FIitness - U.N.O.
- Zdatność NRG
- Zdatność Rambler
- Zdatność Quality Sports
- Zdatność Klarfit
- Zdatność Powerpeak
- Zdatność Wahoo
- Zdatność Assault
Najnowsze instrukcje dla Zdatność
4 Października 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024