Instrukcja obsługi Brandt CAV50B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brandt CAV50B (31 stron) w kategorii Szafy klimatyczne na wino. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/31
1
INSTRUCTION MANUAL
Model Number CAV50X CAV50B : /
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
2
1. CABINET
2. DOOR FRAME
3. DIGITAL CONTROL PANEL
4. HANDLE
5. AIR INLET
6. BOTTOM GRILLE (LOURVES)
7. LEVELING LEGS
8. SECURITY LOCK
9. SHELVES
10. AIR OUTLET
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock, or
injury when using your appliance, follow these
basic precautions:
Read all instructions before using the Wine Cooler:
DANGER WARNING or :
Risk of child suffocation
Do not clean appliance parts with flammable fluids. The fumes can create fire hazard or
explosion.
Do not store or use gasoline, flammable vapors and liquids in the vicinity of this or any other
appliances, the fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTION
Before Using your Wine Cooler
Remove the exterior and interior packing.
Before connecting the Wine Cooler to the power source, let it stand upright and undisturbed for approximately
2 hours.
This will reduce the possibility of malfunction in the cooling system by allowing the coolant to settle after
transportation.
Clean the interior surface with lukewarm water using a soft cloth. Install the handle on the left side of the door.
Installation of Your Wine Cooler
This appliance is designed for free standing installation or built-under (fully recessed). Leave gap of minimum
50mm at back of the wine cellar.
Place your Wine Cooler on a floor that is strong enough to support it when it is fully loaded. To level your
Wine Cooler, adjust the front leveling leg at the bottom of the Wine Cooler.
Locate the Wine Cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.) Do not
install it facing an oven or heat-emanating source.
• Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
• Extreme cold ambient temperature may also cause the unit not to perform properly,
• Avoid locating the unit in humid areas.
Plug the Wine Cooler Into an exclusive, properly installed grounded wall outlet. Do not, under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power
and/or grounding should be directed toward a certified electrician.
Please provide a minimum of 30mm on the top and sides and 50mm at the back of the wine cellar

Specyfikacje produktu

Marka: Brandt
Kategoria: Szafy klimatyczne na wino
Model: CAV50B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brandt CAV50B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Szafy klimatyczne na wino Brandt

Brandt

Brandt CZD7801 Instrukcja

11 Października 2024

Instrukcje Szafy klimatyczne na wino

Najnowsze instrukcje dla Szafy klimatyczne na wino

Summit

Summit SWC525LBI7ADA Instrukcja

15 Października 2024
Summit

Summit SWBV24SS Instrukcja

15 Października 2024
Summit

Summit SWC525L7CSSADA Instrukcja

15 Października 2024
Summit

Summit SWC007 Instrukcja

15 Października 2024
Summit

Summit SCR312LBIWC2 Instrukcja

15 Października 2024
Summit

Summit SWC3668 Instrukcja

14 Października 2024
Summit

Summit SWC525LBIHVADA Instrukcja

14 Października 2024
Baumatic

Baumatic BWC885BGL Instrukcja

14 Października 2024
Summit

Summit SWBV3001 Instrukcja

13 Października 2024