Instrukcja obsługi Bowers & Wilkins P7 Wireless

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bowers & Wilkins P7 Wireless (86 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/86
P7 Wireless
2
ENGLISH
www.bowers-wilkins.com
Welcome to Bowers & Wilkins and P7 Wireless Headphones
Thank you for choosing Bowers & Wilkins. When John Bowers
rst established our company he did so in the belief that
imaginative design, innovative engineering and advanced
technology were keys that could unlock the enjoyment of audio
in the home. His belief is one that we continue to share and it
inspires every product we design.
P7 Wireless is a high performance over-ear headphone that
provides the highest quality personal audio experience combined
with the convenience of wireless operation based on the latest
Bluetooth audio standards. This manual will tell you everything
you need to know to get the most from your P7 Wireless.
P7 Wireless can be used either wirelessly, to play music
streamed from your mobile phone, tablet or computer using
Bluetooth wireless technology, or conventionally inpassive
mode connected by a cable to a suitable headphone output.
P7Wireless can also be used for wireless telephony.
For wireless use, P7 Wireless incorporate a rechargeable battery
pack. When fully charged, the battery pack can provide up to
17 hours use at average volume levels. Battery power is not
consumed when P7 Wireless is used with acable.
3
ENGLISH
1. P7 Wireless Carton Contents
i. P7 Wireless Headphones
ii. USB charging cable
iii. Universal cable
iv. Leather pouch
v. Literature pack
Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.
2. Getting to know P7 Wireless
Once switched on via the Power slide-switch on
its right hand ear piece, P7 Wireless is controlled
via Bluetooth, Play/Pause, Volume + and Volume
buttons. An indicator alongside the Bluetooth button
displays Bluetooth connection state and battery
charge level. P7 Wireless also provides audible
feedback for some control commands and events.
Note: It is possible to toggle the audio cues on
and off by press and releasing ‘Play/Pause’ and
‘+’.
A USB charging socket is located in the right hand
ear piece with a pin-hole reboot button beneath
the ear pad. Beneath the left hand ear pad is a
connection socket for the universal cable that
enables P7 Wireless to be used as a passive
headphone. Connecting the universal cable is
covered in Section9.
3. P7 Wireless Battery Charging
P7 Wireless is shipped with battery power and may
be used immediately, however, it is good practice to
charge the battery fully before rst use. It can take
up to 3 hours for P7 Wireless to reach full charge
however it is possible to use P7 Wireless while the
battery is charging.
Note: The indicator initially displays battery
charge when P7 Wireless is switched on. Green
means that the battery is above 30% charged.
Yellow means that the battery is between 30%
and 10% charged. Red means that the battery is
below 10% charged. If the indicator blinks red,
the battery charge is too low for P7 Wireless to
operate.
Note when the LED blinks red P7 Wireless will not
power on.
To charge P7 Wireless follow the steps described
below.
Using the supplied USB charging cable, connect
the headphones to a powered USB socket; either a
computer USB socket, a mains plug USB charger or
an in-car charger.
While charging, the indicator will blink green. As
the level of charge increases the illuminated period
of the blink will get longer. When fully charged the
indicator will stay illuminated green.
Diagram 1
Main features
Cable On/Off and Bluetooth
control button
Volume -
Play/Pause
Volume +
Diagram 2
Rear view headphones - USB charging socket
USB charging socket
Indicator

Specyfikacje produktu

Marka: Bowers & Wilkins
Kategoria: Słuchawki
Model: P7 Wireless

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bowers & Wilkins P7 Wireless, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Słuchawki Bowers & Wilkins

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

Klipsch

Klipsch R6i Instrukcja

15 Października 2024
Vakoss

Vakoss MH954 Instrukcja

14 Października 2024
Skullcandy

Skullcandy Cassette Instrukcja

14 Października 2024
Jabra

Jabra Wave Corded Instrukcja

14 Października 2024
Manta

Manta MM65 Instrukcja

14 Października 2024
AKG

AKG Y600NC Instrukcja

14 Października 2024
Audio-Technica

Audio-Technica ATH-ANC29 Instrukcja

13 Października 2024
Daewoo

Daewoo AVS1421 Instrukcja

13 Października 2024
Vakoss

Vakoss MH942 Instrukcja

13 Października 2024
SuperTooth

SuperTooth Freedom Instrukcja

13 Października 2024