Instrukcja obsługi Bowers & Wilkins Formation Duo

Bowers & Wilkins system hi-fi Formation Duo

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bowers & Wilkins Formation Duo (91 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/91
2
ENGLISH
www.bowerswilkins.com
Welcome to Bowers & Wilkins and Formation Duo.
Thank you for choosing Formation. When John Bowers rst established Bowers
& Wilkins he did so in the belief that imaginative design, innovative engineering
and advanced technology were keys that could unlock the enjoyment of audio
in the home. That belief continues to inspire every product we design and in
Formation has found its most advanced expression yet.
Formation Duo is a network connected, wireless stereo active network speaker
system that provides extremely high performance reproduction of Formation
audio streams. Formation Duo are primarily intended to be congured and
controlled using the Bowers & Wilkins Home app. The app is available for both
iOS and Android devices. Some commonly used control functions are also
available via touch buttons on the Formation Duo front panels. It is only possible
to install and congure Formation Duo using the Bowers & Wilkins Home app.
Formation Duo will enable you to:
• Listen to audio from streaming services like Spotify, Apple Music, and Roon.
• Listen to network stored audio les.
• Listen to audio over Bluetooth from appropriately enabled Bluetooth source
devices.
• Listen to audio from devices such as turntables (via a phono preamp) and CD
players that are connected to a Bowers & Wilkins Formation Audio.
• Listen to audio, such as Internet Radio, from Airplay or Bluetooth compatible
services and apps.
• Listen to audio playing anywhere in your home on any Formation device
connected to your home network.
The Bowers & Wilkins Home app is required to connect your Formation Duo
to your home network and also to establish connection with other Formation
products in your home. The Bowers & Wilkins Home app also provides some
control and conguration functions during use. Before you begin your Formation
Duo installation please download and install the Bowers & Wilkins Home app on
your iOS or Android device. The Bowers & Wilkins Home app requires iOS V11.4
or later, or Android V8.1 or later. Bluetooth, and WiFi services must be enabled
on your iOS or Android device. You will also need to know your WiFi network
password.
Note: Location Services must be enabled on Android devices during the
Formation setup process. This is because Formation products use a low power
form of Bluetooth (BT-LE) for service communication which on Android devices is
only switched on when Location Services are enabled. Bowers & Wilkins do not
use any location services data for marketing purposes.
Software version - V1.4
3
ENGLISH
1. Formation Duo Carton Contents
2x Formation Duo
Mains power cable set appropriate for your territory
Document pack
2. Installing Your Formation Duo
Your Formation Duo speakers each require a mains
power supply to operate so must be located within
reach of mains sockets. You may wish to install
suitable mains sockets once you have decided on
the locations of your Formation Duo in your listening
room. If your Formation Duo are to use a wired
connection to your network router one of them will
need to be located within reach of an appropriate
network cable.
Formation Duo are primarily intended to be used on
Formation FS Duo stands but can also be placed on
shelves, wall brackets or furniture units. Formation
FS Duo stands will however provide both the best
performance and enable the greatest exibility
in positioning. The stands will also place your
Formation Duo at the correct height – approximately
head height when listening.
Note: If your Formation Duo are to be mounted
on Formation FS Duo stands, please assemble
the stands and secure the speakers to them
before you set up the speakers. Remember that
the Formation Duo mains cables and network
cable (if required) should run through the legs
of the speaker stands. The Formation FS Duo
stands are supplied with rubber and spike foot
options. The spike foot option should be used
when the stands are to be placed on a carpeted
oor. The spikes pierce the carpet to rest on the
surface underneath. Adjust the spike to ensure
that the stands are vertical and don’t rock. Use
the rubber foot option the stands are to be
placed on tiled or wooden oors.
If you still however prefer to install your Formation
Duo on shelves, brackets or furniture units please
ensure that:
• both speakers are located at approximately the
same height.
• the shelves, brackets and furniture are easily able
to support the weight of the speakers and are rigid
and non-resonant.
Stud-work and plasterboard walls are unlikely to
provide adequate strength or rigidity to support
Formation Duo. If you are unsure of the suitability
of a wall, or of your ability to install shelf or bracket
hardware, you should seek professional help.
In the majority of listening rooms your Formation Duo
should be between 2.0m and 4.0m (6.5ft and 13ft)
apart and a similar distance from the listening area.
If the speakers are positioned too close together, the
stereo reproduction may lack scale; if they are too
far apart, the stereo focus may be weak. There is no
need to angle your Formation Duo inwards towards
the listening area however doing so may tighten the
stereo focus. Diagram 1 illustrates basic speaker
positioning.
Like all speakers, Formation Duo radiates sound
energy not only forward but also to the side and,
particularly at bass frequencies, to the rear. As
a result, if they are positioned too close to room
boundaries their performance will be affected. Try to
keep your Formation Duo at least 0.5m (1.6ft) away
from any room boundary.
Even with your Formation Duo placed away from
room boundaries, the material and acoustic
character of the boundaries will still have an
effect on the sound. Try to ensure that immediate
surroundings of each speaker have similar acoustic
qualities. Different acoustic qualities would be heavy
curtains and bare walls, for example.
Diagram 1
Positioning
Diagram 2
Formation Duo rear panel
Connections
In addition to mains power sockets , Formation
Duo carry an Ethernet socket for connection to a
network router if a wired network connection is to be
used in preference to a wireless (WiFi) connection.
Only one speaker of a Formation Duo pair requires a
router connection.
Note: The USB socket located on the Formation
Duo rear panel is intended for service and
diagnostic use only. It cannot be used for any
other purpose.
Note: The Formation Duo connection panel is not
easily accessible once the speakers are attached
to Formation FS Duo stands.
2 metres

Specyfikacje produktu

Marka: Bowers & Wilkins
Kategoria: system hi-fi
Model: Formation Duo

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bowers & Wilkins Formation Duo, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Bowers & Wilkins

Bowers & Wilkins

Bowers & Wilkins Formation Duo Instrukcja

2 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024