Instrukcja obsługi Botex MPX-4LED

Botex Ulga MPX-4LED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Botex MPX-4LED (64 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/64
MPX-4LED Multipack
digital dimmer and switcher
User manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
16.06.2020, ID: 466564
Table of contents
1 General information 5.................................................................................................................................
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions 9.....................................................................................................................................
3 Features 14.......................................................................................................................................................
4 Installation and starting up 15................................................................................................................
5 Connections and controls 16...................................................................................................................
6 Operating 21....................................................................................................................................................
7 Technical 26specications.......................................................................................................................
8 Plug and connection assignments 27..................................................................................................
9 Cleaning 28.......................................................................................................................................................
10 Protecting the environment 29..............................................................................................................
Table of contents
MPX-4LED Multipack 3
digital dimmer and switcher
4MPX-4LED Multipack
digital dimmer and switcher
1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under .www.thomann.de
General information
MPX-4LED Multipack 5
digital dimmer and switcher
1.1 Further information
On our website ( you will lots of further information and details on thewww.thomann.de) nd
following points:
Download This manual is also available as PDF for you to download.le
Keyword search Use the search function in the electronic version to the topics ofnd
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
6MPX-4LED Multipack
digital dimmer and switcher
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: control, button.[VOLUME] [Mono]
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: , .‘24ch’ ‘OFF’
1.3 Symbols and signal words
In this section you will an overview of the meaning of symbols and signal words that arend
used in this manual.
Letterings
Displays
General information
MPX-4LED Multipack 7
digital dimmer and switcher
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
8MPX-4LED Multipack
digital dimmer and switcher
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
10 MPX-4LED Multipack
digital dimmer and switcher
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or If in doubt, seek advice from a registered electrician.re.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
MPX-4LED Multipack 11
digital dimmer and switcher
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions in the chapterspecied
‘Technical of this user manual. Avoid heavy temperature specications’ uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature (for example after transport at low outside temperatures).uctuations
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
12 MPX-4LED Multipack
digital dimmer and switcher
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of types of fuses can cause serious damage to the unit. Firedierent
hazard!
Only fuses of the same type may be used.
Safety instructions
MPX-4LED Multipack 13
digital dimmer and switcher
3 Features
n4 dimmer channels, 5 A per channel, 16 A max.
n17 pre-set programmes
nChase speed control
nMemory for power failure
nSwitches even low loads such as power supplies and LED spotlights
nControl via DMX and via buttons and display on the unit
Features
14 MPX-4LED Multipack
digital dimmer and switcher
4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is Use the shortest possible high-quality cables foro.
all connections. Take care when running the cables to prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or other DMX
device. Connect the output of the DMX device to the input of the second one and so on,rst
to form a series connection. Make sure that the output of the last DMX device in the chain is
terminated by a resistor (110 Ω, W).¼
Connections in ‘DMX’ mode
Installation and starting up
MPX-4LED Multipack 15
digital dimmer and switcher
5 Connections and controls
Front panel
Connections and controls
16 MPX-4LED Multipack
digital dimmer and switcher
1[CHANNEL OUTPUT]
4 × socket as dimmer output for connecting the spotlight to be controlled, loadable with 5 A per channel, total up to
max. 16 A.
2 …[1] [4]
Channel indicator light: Shows in all operating modes which channels are currently being used by the running pro‐
gramme (LEDs light up).
3 Display
[DMX signal]
DMX indicator light: lights up when the unit is turned on and receives a DMX signal.
[Receive]
The indicator lights up, when the mode is active.[Receive] ‘Receive’
[Chase]
The indicator lights up, when the mode is active.[Chase] ‘Chase’
4[MODE]
Button for choosing the operating mode.
Connections and controls
MPX-4LED Multipack 17
digital dimmer and switcher
[MENU]
Button to open the main menu and display valuesconrm
Button to increase the displayed value.
Button to decrease the displayed value.
Connections and controls
18 MPX-4LED Multipack
digital dimmer and switcher
Connections
Connections and controls
MPX-4LED Multipack 19
digital dimmer and switcher
5[FUSE]
Fuse holder
6[DMX OUT]
DMX output
7[DMX IN]
DMX input
8[POWER INPUT]
Power cord
9[POWER]
Main switch. Turns the device on and o.
Connections and controls
20 MPX-4LED Multipack
digital dimmer and switcher

Specyfikacje produktu

Marka: Botex
Kategoria: Ulga
Model: MPX-4LED

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Botex MPX-4LED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Botex

Botex

Botex ART-4 Instrukcja

22 Września 2024
Botex

Botex NETcon 8-5 Instrukcja

22 Września 2024
Botex

Botex Uni-Dim 1 Professional Dimmer Instrukcja

22 Września 2024
Botex

Botex SP-1500 DMX Strobe Instrukcja

22 Września 2024
Botex

Botex SDC-24 DMX Desk Instrukcja

22 Września 2024
Botex

Botex Controller DMX SDC-6 Instrukcja

21 Września 2024
Botex

Botex Chainhoist Controller CHC-8 Instrukcja

21 Września 2024
Botex

Botex DC-1216 Instrukcja

21 Września 2024
Botex

Botex DPX-1210T Instrukcja

21 Września 2024
Botex

Botex UP-2 - 1 Channel Dimmer Instrukcja

21 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Schwaiger

Schwaiger CALE100 511 Instrukcja

9 Kwietnia 2025
RYOBI

RYOBI One+ P796B Instrukcja

8 Kwietnia 2025
ADB

ADB Orkis Fresnel Instrukcja

8 Kwietnia 2025
Claypaky

Claypaky Actoris ParLED Instrukcja

8 Kwietnia 2025
ET2

ET2 Waterfall E24846-90 Instrukcja

8 Kwietnia 2025
V-TAC

V-TAC VT-995 Instrukcja

7 Kwietnia 2025
WAC Lighting

WAC Lighting DS-WD05 Instrukcja

5 Kwietnia 2025
Canarm

Canarm Arden IPL707A01GPH Instrukcja

5 Kwietnia 2025
Canarm

Canarm Novalee IPL1130A01GD Instrukcja

5 Kwietnia 2025
WAC Lighting

WAC Lighting WS-W33118 Instrukcja

5 Kwietnia 2025