Instrukcja obsługi Boston Acoustics Bravo II

Boston Acoustics głośnik Bravo II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boston Acoustics Bravo II (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

High Performance Multi-Purpose Speaker

Bravo II

Speciﬁcations

Frequency Response (±3dB) 80Hz–20,000Hz

Recommended Ampliﬁer Power 15–125 watts

Nominal Impedance 8 ohms

Sensitivity [1 watt (2.83v) at 1m] 89dB

Bass Unit 41⁄2"(115mm) copolymer

Tweeter 1"(25mm) black anodized

aluminum dome with AMD

Crossover Frequency 2500Hz

Dimensions (HxWxD) with corner ﬁllers 141⁄4x 61⁄2x 51⁄4" (362 x 166 x 134mm)

Dimensions (HxWxD) without corner ﬁllers 141⁄4x 61⁄2x 41⁄4" (362 x 166 x 108mm)

Weight 5 lbs (2.25kg)

Finish White, black, or silver textured ABS

with matching metal grille

Description

The Boston Bravo™II is a multi-purpose, high performance compact loudspeaker. The Bravo II, which uses Boston’s

patented one-inch aluminum dome VR®tweeter with AMD and a 41⁄2-inch woofer, can be combined with its supplied

mounting bracket or rear stand to be mounted or placed virtually anywhere in any room.

The Bravo II is essentially one-quarter of a cylinder, allowing it to be mounted vertically at any height in a corner, or hori-

zontally at the top of a wall, where wall and ceiling meet. Attaching the Bravo II to any surface is as simple as mounting

the bracket to the wall, removing the grille from the speaker, and then attaching the speaker to the bracket using the sup-

plied screws. Once the grille is placed back on the speaker, the means of attachment becomes virtually invisible.

Additionally, the Bravo II can be placed either horizontally or vertically on any ﬂat surface, such as a table or a shelf.

Horizontally, it can either angle upward by resting on its two corner ﬁllers or sit untilted using the rear stand.

Because it is designed as a high-performance, general-purpose speaker, the Bravo II is suitable for any high-ﬁdelity appli-

cation where it is important that the speaker blends into its surroundings. The Bravo II is well suited for background and

whole house music applications. The Bravo II’s highly ﬂexible mounting bracket allows it to be placed in a wide variety of

locations, and to for the speaker to be angled for optimum sound quality and three-dimensional imaging. When a pair is

placed vertically in the corners of a room, the Bravo II creates an unusually wide listening window, providing true stereo

sound reproduction over a broad area.

For full-range applications, it is recommended that the Bravo II be used in conjunction with one of Boston’s powered sub-

woofers. The Bravo II’s low frequency limit is 80Hz, allowing for a great deal of placement ﬂexibility for the subwoofer. The

Bravo II’s robust design allows it be used with full-range signals and ampliﬁers rated between 15 and 125 watts. Please

note that the Bravo II is not magnetically shielded. Therefore, it should not be placed closer than 18 inches from a tube

television. The Bravo II may be used safely near projection and plasma televisions.

Also available; The Boston Bravo II Center. The Bravo II Center is sonically matched to the Bravo II and features

Magnaguard®magnetic shielding allowing for use on or near tube televisions without interference.

How to Connect Your Speakers

Correctly wiring your speakers is important for achieving the best sound quality. Wiring should take just a few

minutes, but it’s important to do it carefully, since incorrect wiring (such as reversed connections) can result in a poor

soundstage and poor bass.

We recommend 18-gauge wire or thicker for runs up to 15 feet (4.5m), and 16-gauge wire or thicker for longer runs.

Separate the ﬁrst few inches of the wire conductors. Strip off 1⁄2-inch (12mm) of insulation from the ends of each

speaker wire to expose the two conductors and tightly twist the wire strands.

WARNING: To prevent electrical shock hazard, always switch off the ampliﬁer or receiver when making connections

to the speaker.

IMPORTANT: Typically, one side of the wire is smooth.

Connect this side to the –(black) connection. The

other side has a rib or stripe. Connect this to the

+(red) connection.

Using the spring terminal posts: The spring terminal

posts permit easy connection to banana plugs, spade

lugs, and bare wire.

Push the the top of the terminal down by approximately

1⁄4-inch, exposing the hole. Insert the wire in the hole

and release the terminal.

Connecting the Boston Bravo to Your Ampliﬁer or Receiver

1. Connect the speaker terminals to the

ampliﬁer speaker outputs.

2. Make sure the speaker cable is cor-

rectly routed through the mounting

bracket.

(see Mounting Options)

3. When making all connections, be sure

to connect

+ + –to (red) and –to (black).

4. If using the Bravo II with a subwoofer,

set the receiver's bass management to

SMALL in the speaker setup menu. This

will divert very low frequencies away

from the center channel to the main

speakers and/or subwoofer.

speaker terminal

amplifier or receiver

Specyfikacje produktu

Marka:	Boston Acoustics
Kategoria:	głośnik
Model:	Bravo II

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Boston Acoustics Bravo II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Boston Acoustics

Boston Acoustics VSi 580T2 Instrukcja

11 Stycznia 2025

Boston Acoustics SoundWare XS 5.1 Instrukcja

13 Grudnia 2024

Boston Acoustics A 26 Instrukcja

13 Grudnia 2024

Boston Acoustics Bravo 20 Instrukcja

13 Grudnia 2024

Boston Acoustics A-25 Instrukcja

13 Grudnia 2024

Boston Acoustics SoundWare black Instrukcja

13 Grudnia 2024

Boston Acoustics CS 275 Instrukcja

13 Grudnia 2024

Boston Acoustics A-250 Instrukcja

13 Grudnia 2024

Boston Acoustics HSi 250 Instrukcja

13 Grudnia 2024

Boston Acoustics MC200 Air Instrukcja

13 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025

ION Insta Sound Instrukcja

15 Stycznia 2025

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025

Yamaha WX-010 Instrukcja

15 Stycznia 2025

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025