Instrukcja obsługi Boss ES-5

Boss przełącznik ES-5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss ES-5 (22 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 32 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/22

Owner’s Manual

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s Manual (p.

21)). After reading, keep the document(s) including those sections where it will be available for immediate reference.

Contents

Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Rear Panel (Connecting Your Equipment) . . . . . . . . . . . . . . . . . . . 2

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Attaching the Rubber Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Turning the Power On and O . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Switching the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Saving/Recalling a Combination of Eect Units

(Memory Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Patch Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Switching Between Memory and Manual Modes . . . . . . . . . . . . 6

Saving a Patch (Patch Write) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Recalling a Patch (Patch Change) . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Creating a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Tips for Creating Patches (Sounds) . . . . . . . . . . . . . . . . . . . . . . . . . 7

Changing the Eect Loop Settings . . . . . . . . . . . . . . . . . . . . . . . . . 8

Changing the Eect Loop Connection Order. . . . . . . . . . . 8

Making a Parallel Connection . . . . . . . . . . . . . . . . . . . . . . . . 8

Specifying Carryover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Editing the Settings of a Patch (Memory Edit Mode) . . . . . . . . . 9

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Making Global Settings (System Setting) . . . . . . . . . . . . . . . . . 12

List of Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Patch/Data Operations (Utility) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Patch (Patch Copy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Exchanging Patches (Patch Exchange). . . . . . . . . . . . . . . . . . . . . . 13

Initializing a Patch (Patch Init) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Bank (Bank Copy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Exchanging Banks (Bank Exchange) . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Group (Group Copy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Exchanging Groups (Group Exchange) . . . . . . . . . . . . . . . . . . . . . 13

Transmitting Data to an External MIDI Device (Bulk Dump) . . . 13

Restoring the Factory Settings (Factory Reset) . . . . . . . . . . . . . . . 14

Advanced Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the Level of Each Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching the Amp’s Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing the BOSS DD-7’s Delay Time for Each Patch . . . . . . . . 16

Using the External Footswitch (BOSS FS-7’s B Switch) to Turn

Delay On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using the External Footswitch (BOSS FS-7’s A Switch) to

Change the Delay Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Applying Phaser Only While the Currently Selected Number

Switch Is Held Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Switching a MIDI-Equipped Eect Unit’s Memory When a

Patch Is Changed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the Expression Pedal to Control a MIDI-Equipped Eect

Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting a Wah or Fuzz (Input Buer O) . . . . . . . . . . . . . . . . 19

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Main features

The ES-5 is a switching system that lets you connect eect pedals

and other eect units, and then store and recall up to 200 dierent

combinations of them.

It also provides a wide variety of external control functions for

controlling your amp and eects in real time.

Panel Descriptions

Rear Panel (Connecting Your Equipment)

NOTE

To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

INPUT jack

Connect your guitar or bass to this

jack.

SEND 1–5, RETURN 1–5 jacks

These jacks provide eect loops.

Signals are sent from SEND 1–5 jacks to each eect unit, and the signals from each

eect unit are received at the RETURN 1–5 jacks.

Connect the SEND 1–5 jacks to the INPUT jack of each eect unit, and connect the

OUTPUT jack of each eect unit to the RETURN 1–5 jacks.

OUTPUT jack

This is the output jack.

Pressing the [MUTE] switch mutes the

output from the OUTPUT jack.

TUNER jack

This jack is for connecting an external

tuner.

The signal that is input from the INPUT

jack is output from this jack even if

mute is on.

SENDRETURN SENDRETURN

What is an eect loop?

This is a connection in which an eect device is connected via send and

return jacks. The ES-5 provides ve eect loops, 1–5.

Panel Descriptions

EXT CTL jacks

CTL 1/2, 3/4 jacks

These are control jacks for latch or

momentary operation.

You can use them to control various things

such as switching amp channels or turning

reverb on/o.

If you’re using an eect device that’s

equipped with a footswitch jack, connect

that jack here.

Each of these jacks can accommodate

a stereo 1/4” plug (TRS) to make the

appropriate connection to the device

you’re controlling.

* If 1/4” plug cables are connected, only

CTL 1 and CTL 3 are available.

MIDI connectors

Connect an external MIDI device here to transmit and

receive MIDI messages.

The operation of the MIDI OUT/THRU connectors

depends on the system settings (p. 12).

DC IN jack

Connect the included AC

adaptor here.

The power turns on when

you plug the connected

AC adaptor into an AC

outlet.

TIP RING

CTL 1

CTL 3

CTL 2

CTL 4

SENDRETURN

CTL IN jack

These let you control eect units or amps that are connected to the EXT CTL

jacks.

To use this as EXP jack

Connect an expression pedal (such as the Roland

EV-5).

To use this as CTL 1/2 jack

Connect a footswitch.

NOTE

5This instrument is equipped with balanced

(TRS) type jacks. Wiring diagrams for these

jacks are shown below. Make connections

after rst checking the wiring diagrams of other equipment you intend

to connect.

5Use only the specied expression pedal (FV-500H, FV-500L, Roland

EV-5; sold separately). By connecting any other expression pedals, you

risk causing malfunction and/or damage to the unit.

FS-5U x 2

CTL 1 CTL 2

RINGTIP

Stereo 1/4” phone type

1/4” phone type

FS-6

CTL 2 CTL 1

Stereo 1/4” phone type

FS-7

CTL 2

CTL 1

Stereo 1/4” phone type

FS-5U x 1

CTL 1

1/4” phone type

FS-5U

FS-6

Mode/Polarity switch

FS-7

MIDI device

Specyfikacje produktu

Marka:	Boss
Kategoria:	przełącznik
Model:	ES-5
Rodzaj zasilania:	Prąd przemienny
Wbudowany wyświetlacz:	Tak
Typ wyświetlacza:	LCD
Wysokość produktu:	68 mm
Szerokość produktu:	337 mm
Głębokość produktu:	97 mm
Waga produktu:	1300 g
Podręcznik użytkownika:	Tak
Technologia łączności:	Przewodowa
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
6,35 mm (1/4 cala) wejście:	1
6,35 mm (1/4 cala) wyjście:	1