Instrukcja obsługi Boss DD-500

Boss odbiornik DD-500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss DD-500 (39 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/39
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the Batteries . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment. . . . . . . . . . . . . . . 2
Turning the Power On . . . . . . . . . . . . . . . . . . 4
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . 5
Adjusting the Delay . . . . . . . . . . . . . . . . . . . . 5
Turning Delay On/O . . . . . . . . . . . . . . . . . . . 6
Switching Banks/Patches . . . . . . . . . . . . . . . . 7
Using the [TAP/CTL] Switch to Control the Delay 8
Playing Phrase Loops . . . . . . . . . . . . . . . . . . . 9
Editing a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
MIDI PC MAP . . . . . . . . . . . . . . . . . . . . . . . . . 18
Convenient Functions . . . . . . . . . . . . . . . . . . . . 19
Specifying Whether to Carry-Over the Delay
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Assigning the Functions of the [A], [B], and
[TAP/CTL] Switches . . . . . . . . . . . . . . . . . . . . 19
Synchronizing with a DAW or External MIDI
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connection Example . . . . . . . . . . . . . . . . . . . 20
MIDI Messages That Can Be Transmitted and
Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
MIDI Messages That Can Only Be Received . . . . 21
MIDI Routing . . . . . . . . . . . . . . . . . . . . . . . . . 21
Assigning a Function to an External Pedal. . . . . 22
Restoring the Factory Default Settings . . . . . . . 24
Transmitting Data to an External MIDI Device . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 25
Main Specications . . . . . . . . . . . . . . . . . . . . . . 25
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . 26
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . 26
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES”
(leaet “USING THE UNIT SAFELY” and Owner’s Manual (p. 26)). After reading, keep the
document(s) including those sections where it will be available for immediate reference.
5High-precision 96 kHz 32-bit audio processing from input to output ensures high audio quality.
5Easily visible delay time indication and an independent [TAP/CTL] switch provide sophisticated
functionality that’s easy to use in live performance.
5A total of 12 dierent delay modes, including “VINTAGE DIGITAL” that models the SDE-3000 and
DD-2, as well as “ANALOG” and “TAPE.”
5The memory function lets you store and recall 297 dierent setups from internal memory.
“CARRY OVER” provides seamless transition that preserves the reverberant sound when
switching between patches.
5“Phrase Loop” function lets you layer new material in real time while recording and playing back.
This can be used simultaneously with delay.
5By connecting the DD-500 via a USB cable or MIDI cables, you can switch sounds and control
parameters in synchronization with your computer DAW or an external MIDI device.
© 2015 Roland Corporation
Owner’s Manual
2
Getting Ready
Installing the Batteries
Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the
unit.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you
carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY”
and “IMPORTANT NOTES” (separate sheet “USING THE UNIT SAFELY” and Owner’s manual (p. 26)).
* We recommend that you keep batteries installed in the unit even though you’ll be powering it
with the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the
AC adaptor gets accidently disconnected from the unit.
* To prevent malfunctions or accidents, install or replace the batteries before connecting the unit
to other equipment.
* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.
Attaching the Rubber Feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
Connecting the Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all
the units before making any connections.
* Be sure to minimize the volume of your amp before you connect or disconnect cables.
DC IN jack
Accepts connection of an AC Adaptor (PSA series; sold
separately). By using an AC Adaptor, you can play without
being concerned about how much battery power you have left.
* Use only the specied AC adaptor (PSA series; sold
separately), and connect it to an AC outlet of the correct
voltage. Do not use any other AC adaptor, since this may
cause malfunction.
* If the AC adaptor is connected while power is on, the power
supply is drawn from the AC adaptor.
USB (O) port
Use a commercially available
USB 2.0 cable to connect this
port to your computer.
You can synchronize with a
DAW via MIDI.
MIDI IN, OUT connectors
Connect an external MIDI
device here.
You can synchronize with
an external MIDI device
via MIDI.
MIDI device
3
Getting Ready
CTL 1 ,2/EXP jack
You can control various parameters by connecting a footswitch (FS-5U, FS-5L, FS-6, FS-7: sold separately) or an expression pedal (such as
the Roland EV-5: sold separately) to the CTL 1, 2/EXP jack (p. 22).
INPUT A/MONO, B jacks
Connect your electric guitar, or another
instrument or eect unit, to these jacks.
* Use the INPUT A/MONO jack and B jack
when connecting a stereo-output eects
unit. Use only the INPUT A/MONO jack if
you’re using a mono source.
* The INPUT A/MONO jack doubles as
the power switch. Power to the unit is
turned on when you plug into the INPUT
A/MONO jack; the power is
turned o when the cable is
unplugged.
OUTPUT A/MONO, B jacks
Connect these jacks to your amp or monitor speakers.
If you’re using a mono setup, use only the OUTPUT A/MONO jack.
* Do not connect headphones to the OUTPUT A/MONO, B jacks.
Doing so may damage the headphones.
When connecting EV-5
EXP
* Use only the specied
expression pedal (EV-5; sold
separately). By connecting any
other expression pedals, you
risk causing malfunction and/
or damage to the unit.
When Connecting an FS-7
Stereo 1/4” phone type
,1/4” phone type x 2
When Connecting an FS-6
MODE/POLARITY switch
CTL 2 CTL 1
Stereo 1/4” phone type
,Stereo 1/4” phone type
MODE/POLARITY switch
When Connecting an FS-5U
(or FS-5L)
When Connecting Two FS-5Us
(or FS-5Ls)
1/4” phone type ,1/4”
phone type
CTL 1 CTL 2 CTL 1
POLARITY switch
Stereo 1/4” phone type
,1/4” phone type x 2
When connecting an FS-5L, set MODE to
“MOMENT” (p. 22).

Specyfikacje produktu

Marka: Boss
Kategoria: odbiornik
Model: DD-500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Boss DD-500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Boss

Boss

Boss DD-500 Instrukcja

12 Stycznia 2025
Boss

Boss PT3000 Instrukcja

11 Stycznia 2025
Boss

Boss Acoustic Singer Live LT Instrukcja

15 Grudnia 2024
Boss

Boss Acoustic Singer Live Instrukcja

15 Grudnia 2024
Boss

Boss WAZA-AIR BASS Instrukcja

15 Grudnia 2024
Boss

Boss Elite BE10ACP.WX Instrukcja

7 Października 2024
Boss

Boss Elite BE9ACP.XC Instrukcja

7 Października 2024
Boss

Boss Elite BE10ACP.XC Instrukcja

7 Października 2024
Boss

Boss AR1600.2 Instrukcja

7 Października 2024
Boss

Boss AR1500M Instrukcja

5 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025