Instrukcja obsługi Boompods Zero XL

Boompods głośnik Zero XL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boompods Zero XL (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Switch ON: LED will flash under charg cover,
Choose “ZERO XL” from your device menu,
Wait until you hear voice prompt “Connected”,
You are now connected.
Pair to 1 Speaker as previous page.
Switch ON speaker 2.
Now press HOLD speaker 1. for 1s
or until you hear a ”du du”.
Now WAIT until you hear a “bleep” sound.
You are now dual paired.
Play and enjoy stereo sound.
But how is this possible? I mean, this was plastic waste!
Yes. But when it comes to the most common used materials
we’re collecting, for instance PET bottles, this waste already
had food grade during its first lifecycle. After collecting it,
our local teams are washing and sorting the plastic which is
then shredded into flakes. After this step, the innovative
technology we have developed with the Swiss University of
Applied Sciences OST, takes over: We transform these flakes
into pellets in a pure mechanical process, neither chemicals
nor virgin plastics are being added. We use the latest
technology and apply physical methods (vacuum,
decompression, degassing, melting) to transform waste and
extend the molecular chains of these wasted polymers. The
result is a strong, clean and reliable material.
Product Name ZERO XL
Type Waterproof Bluetooth speaker
Compatibility Devices with Bluetooth 5 or lower
Warranty 12 months
IPX Rating IPX 7
Features Waterproof , Mic, Volume up,
Volume down, Skip Tracks, selfie
& Dual pairing
Play Time 9H @ 70%
Cables USB-C to USB-A
Battery 1200mah 3.7V @ 4.44Wh
Charge time 2h
frequency range 2.4-2.480 GHZ
Sensitivity -42dB(3V,2.2KΩ；0dB=1V/Pa,1KHz),
omni-directional, S.N.R≥60dB
Mic frequency range 20hz-20khz
Working Current ≤ 50mA +/-5(minimum volume)
Working Voltage DC 3.3-4.25 V
Speaker 5W - 50mm + Passive bass port.
Bluetooth V5.3
The Declaration of Conformity can be found at:
https://www.boompods.com/product/ZERO XL Hereby, Boompods
declares that the radio equipment type [Speaker with Bluetooth] is in
compliance with Directive 2014/53/EU. FCC id: 2A36Q-ZERO XL
Thread the bungee cord
through the bass port holes..
Now, tie a knot.
LED red = charging
LED OFF = charged
The recycled ocean plastic used to make this product
may have traces of the wide mix of types of plastics
collected, this can allow some minor black spots and
imperfections to appear upon the surface. These are
normal and do not affect the performance of the
product. The material is unique in character and
happy not to be in the Sea.
ZERO XL
Making a stereo pair.
speaker 1. speaker 2.
beep!
MIC
charge
cover
hanging
strap
Reset
Selfie,Open camera
Siri (Voice assist)
Hang FCC statment
This device complies with Part 15 of the FCC rules. Operation is subject to the
following twoconditions: 1) this device may not cause harmful interference,
and 2) this device must acceptany interference received, including interference
that may cause undersired operation.
Changes or modifications not expressly approved by the party reponsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonableprotection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with instructions, may cause harmful
interference to radio communicationsHowever, there is no guarantee that
interference will not occur in a particular installation. if this equipment does
cause harmful interference to radio or television reception, which can be
determinedby turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connect.
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement,
the device canbe used in portable exposure condition without restriction.
FCC id: 2A36Q-ZERO XL

Specyfikacje produktu

Marka: Boompods
Kategoria: głośnik
Model: Zero XL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Boompods Zero XL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Boompods

Boompods

Boompods Zero XL Instrukcja

20 Grudnia 2024
Boompods

Boompods ZERO-TALK Instrukcja

26 Września 2024
Boompods

Boompods Aquablaster Instrukcja

15 Września 2024
Boompods

Boompods Blockblaster Instrukcja

7 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Philips

Philips TAPB600 Instrukcja

20 Grudnia 2024
Philips

Philips HTL3380 Instrukcja

20 Grudnia 2024
Philips

Philips SPA725 Instrukcja

20 Grudnia 2024
Philips

Philips AECS7100 Instrukcja

20 Grudnia 2024
Philips

Philips AECS5000 Instrukcja

20 Grudnia 2024
Philips

Philips TAVS510 Instrukcja

20 Grudnia 2024
Infinity

Infinity Reference 6032si Instrukcja

20 Grudnia 2024
Sencor

Sencor SMC BS10 Instrukcja

20 Grudnia 2024
JBL

JBL Media 2000 Instrukcja

20 Grudnia 2024
JBL

JBL Media Sub Instrukcja

20 Grudnia 2024