Instrukcja obsługi Bogen WV250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen WV250 (17 stron) w kategorii Staafmixer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
Wall-Mount Power Vector Amplifiers
WV100, WV150, & WV250 Models
Installation and Use Manual
© 2002 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2086-01E 1204
Notice
Every effort was made to ensure that the information in this
guide was complete and accurate at the time of printing.
However, information is subject to change.
Important Safety Information
WARNING: To Reduce The Risk of Fire Or Electric Shock,
Do Not Expose This Apparatus To Rain Or Moisture.
Always follow these basic safety precautions when installing and
using the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. DO NOT block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade, or the
third prong, are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufac-
turer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT
CAUTION: TO PREVENT THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is
intended to alert the user to the pres-
ence of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompa-
nying the appliance.
Contents
Page
PANEL DESCRIPTIONS..................................................................................................2-3
Wall-Mount Power Vector Front Panel ..........................................................................................2
Wall-Mount Power Vector Module Bay (Rear) ............................................................................3
Wall-Mount Power Vector Connector Board (Rear)..................................................................3
INSTALLATION ..................................................................................................................4
Package Contents ................................................................................................................................4
Mounting ................................................................................................................................................4
Front Panel Input Connector............................................................................................................4
MODULES ............................................................................................................................5
Module Installation ..............................................................................................................................5
Output Modules ..................................................................................................................................5
Functionality ....................................................................................................................................5
Input Modules ......................................................................................................................................5
Functionality ....................................................................................................................................5
Priorities ..........................................................................................................................................5
CONNECTIONS ..............................................................................................................6-8
Speakers ................................................................................................................................................6
Transformer-Coupled Speaker Connections ................................................................................6
4-Ohm Low-Impedance Speaker Connections ............................................................................6
COM and GND Terminals ............................................................................................................7
Remote Volume Control ....................................................................................................................7
Mute Control........................................................................................................................................7
Bridging Mix Bus ..................................................................................................................................7
System Expansion of Power Vector Amplifiers ............................................................................8
OPERATION ..................................................................................................................9- 01
Front Panel Controls & Indicators ..................................................................................................9
Input Volume Controls....................................................................................................................9
Signal / Clip Indicator ....................................................................................................................9
Bass and Treble Controls................................................................................................................9
Master Volume Control ..................................................................................................................9
Average / Peak Switch & LED Output Meter ............................................................................9
Power Switch / Power Indicator ....................................................................................................9
Output Limiter.............................................................................................................................. 01
Rear Panel Controls ........................................................................................................................ 01
Trans Output / Direct Out Selector Switch .............................................................................. 01
Other Controls ................................................................................................................................ 01
Tone Control Bypass Switch........................................................................................................ 01
Low-Cut Switch ............................................................................................................................ 01
BLOCK DIAGRAM ............................................................................................................11
SPECIFICATIONS ............................................................................................................ 21
TROUBLESHOOTING .................................................................................................... 31
LIMITED WARRANTY ......................................................................................Back Cover
ACCESSORIES/COMPONENTS ....................................................................Back Cover
1

Specyfikacje produktu

Marka: Bogen
Kategoria: Staafmixer
Model: WV250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bogen WV250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Staafmixer Bogen

Bogen

Bogen WV150 Instrukcja

7 Października 2024
Bogen

Bogen WV250 Instrukcja

7 Października 2024
Bogen

Bogen C100 Instrukcja

7 Października 2024

Instrukcje Staafmixer

Najnowsze instrukcje dla Staafmixer

Klarstein

Klarstein Manhattan Instrukcja

11 Października 2024
Caso

Caso HB 2400 Pro XL Instrukcja

10 Października 2024
Hyundai

Hyundai HM 707 Instrukcja

9 Października 2024
A-Designs

A-Designs Mix Factory Instrukcja

9 Października 2024
Tefal

Tefal HT4005 Instrukcja

9 Października 2024
Yorkville

Yorkville MM5D Instrukcja

8 Października 2024
Rolls

Rolls MX410 Instrukcja

8 Października 2024
Muse

Muse MS-05 HB Instrukcja

8 Października 2024
KitchenAid

KitchenAid KHM312 Instrukcja

8 Października 2024