Instrukcja obsługi Blustream HEX70CS-RX

Blustream przedłużacz AV HEX70CS-RX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blustream HEX70CS-RX (4 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

contact support@blustream.co.uk / support@blustream.com.au

HEX70CS-KIT QUICK REFERENCE GUIDE

Quick Reference Guide

HEX70CS-KIT

Our HEX70CS-KIT HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 HDBaseT™

extender set offers market leading features and outstanding value utilising

CSC technology. The product extends HDMI,Bi-directional IR & RS-232 and

Bi-directional PoH (PoE) up to lengths of 70m (4K 40m).The Transmitter

includes a HDMI loop-out for integrating local displays or cascading to

multiple devices. The Receiver features simultaneous analogue stereo and

digital coax audio breakout.

Introduction

FEATURES:

• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable

• Advanced Color Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR

• Supports 4K 60Hz 4:4:4 UHD video up to 40m

• Extends HDMI 1080P video up to 70m

• Features 1x HDMI loop-out on HEX70CS-TX for integrating local displays or cascading to multiple devices

• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K

• Supports all known HDMI audio formats including Dolby TrueHD, Atmos and DTS-HD Master Audio transmission

• HDMI re-clocking on the HDBaseT™ Receiver to help solve HDMI HDCP, compatibility and handshaking issues

• HDMI audio breakout to analogue L/R audio and coaxial digital outputs concurrently

• Supports bi-directional RS-232 pass through

• Supports bi-directional IR pass through

• Supplied with Blustream 5V IR receiver and emitter

• Advanced EDID management

• HDCP 2.2 Support

Mo de

RS-232 IR OutIR In

RS-232 DC 12V

Po we r

HDB T Out

Upgrade

EDI D

3210

IR Out IR In

HDM I In HDMI Out

Li nk

HEX70CS-KIT QUICK REFERENCE GUIDE

www.blustream.co.uk

Panel Description HEX70CS-RX

Panel Description HEX70CS-TX

1 Mode dip-switch - To switch RS-232 serial port

between pass-through and firmware update mode

2 RS-232 / serial connector

3 HDBaseT input

4 HDBaseT signal link indicator

5 DC 12V screw type connector

6 Power status indicator

9 HDMI input

q HDMI link indicator

w HDMI output

e HDMI link indicator

7 Coaxial digital output - de-embedded from HDMI input

8 Analogue audio Le/Right output (3.5mm stereo jack

de-embedded from HDMI input. Supports stereo

2CH PCM audio only

9 HDMI signal link indicator

q HDMI Output

w IR IN (to Blustream 5V 3.5mm IR receiver)

e IR OUT (to Blustream 5V 3.5mm IR emitter)

3 4 5 6 7

1 EDID DIP switch (UP=0, DOWN=1)

2 IR OUT (to Blustream 5V 3.5mm IR emitter)

3 IR IN (to Blustream 5V 3.5mm IR receiver)

4 RS-232 / Serial connector

5 USB Upgrade port - For future use

6 HDBaseT output

7 Power status indicator

8 DC 12V screw type connector

9 10 11 12

1 2 3 4 5 7 8 9 10 116 12

Mode

RS-232 IR OutIR In

RS-232 DC 12V

Power

HDBT Out Upgrade

EDID

3210

IR Out IR In

HDMI In HDMI Out

Lin k

contact support@blustream.co.uk / support@blustream.com.au

HEX70CS-KIT QUICK REFERENCE GUIDE

Understanding the Transmitter/Receiver status lights

EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by

the source to find out what audio and video resolutions are supported by the display. By pre-determining the video resolution

and audio format of the source and display device you can reduce the time needed for EDID hand shaking thus making

switching quicker and more reliable.

Configuration of extender EDID settings can be achieved using the product dip-switches on the end of the HEX70CS-TX. EDID

dip-switch settings are shown below.

EDID Control

Global EDID settings

Dip-switch position ‘0’ = O

Dip-switch position ‘1’ = On

The Blustream HEX70CS-KIT extender solutions include status LED indicators on both the Transmitter and Receiver

products to show all connections are active and to help diagnose possible problems.

Receiver:

• The HDMI signal link light will be o when there is no connection with a display/sink

• The HDMI link light will be on when there is an active connection with a display

• The HDBaseT link light will be o when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT

input

• The HDBaseT link light will blink if there is an unstable connection between the Transmitter and Receiver

• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter

and an active connection is achieved with the Receiver.

Transmitter:

• The Input HDMI signal link light will be o when there is no connection with a source device

• The Output HDMI signal link light will be o when there is no connection with a display/sink

• The Input HDMI link light will be on when there is an active connection with a source device

• The Output HDMI link light will be on when there is an active connection with a display/sink

• The HDBaseT link light will be o when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT

output

• The HDBaseT link light will blink if there is an unstable connection between the Transmitter and Receiver

• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter

and an active connection is achieved with the Receiver/Matrix.

EDID Dip-switches

[DIP]=0000: HDMI 1080p@60Hz, Audio 2ch PCM

[DIP]=0001: HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=0010: HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=0011: HDMI 1080i@60Hz, Audio 2ch PCM

[DIP]=0100: HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=0101: HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=0110: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 2ch PCM

[DIP]=0111: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=1000: HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=1001: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM

[DIP]=1010: HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY

[DIP]=1011: HDMI 4K@60Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD

[DIP]=1100: DVI 1280x1024@60Hz, Audio None

[DIP]=1101: DVI 1920x1080@60Hz, Audio None

[DIP]=1110: DVI 1920x1200@60Hz, Audio None

[DIP]=1111: Soware Control EDID

E DI D

3210

IR Out IR In

Specyfikacje produktu

Marka:	Blustream
Kategoria:	przedłużacz AV
Model:	HEX70CS-RX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blustream HEX70CS-RX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje przedłużacz AV Blustream

Blustream HDCP11AB Instrukcja

29 Września 2024

Blustream HEX70ED-KIT Instrukcja

29 Września 2024

Blustream HEX100ARC-RX Instrukcja

29 Września 2024

Blustream HEX100HDVGA-TX Instrukcja

29 Września 2024

Blustream HEX70ED-TX Instrukcja

29 Września 2024

Blustream HEX100HDVGA-RX Instrukcja

29 Września 2024

Blustream HEX70CS-RX Instrukcja

29 Września 2024

Blustream HEX70B-KIT Instrukcja

29 Września 2024

Blustream HEX70ED-RX Instrukcja

29 Września 2024

Blustream HEX31WP-TX Instrukcja

29 Września 2024

Instrukcje przedłużacz AV

Najnowsze instrukcje dla przedłużacz AV

StarTech.com STUTPRXWAL Instrukcja

9 Października 2024

StarTech.com STUTPTXWAL Instrukcja

9 Października 2024

StarTech.com CPNTUTPWALLA Instrukcja

9 Października 2024

StarTech.com STUTPWALL Instrukcja

9 Października 2024

StarTech.com ST121UTPDVGB Instrukcja

9 Października 2024

StarTech.com ST121RGB Instrukcja

9 Października 2024

StarTech.com ST121UTP232 Instrukcja

9 Października 2024

StarTech.com ST121REU Instrukcja

9 Października 2024

StarTech.com STHDBTRX Instrukcja

9 Października 2024

StarTech.com ST122UTPAEU Instrukcja

9 Października 2024