Instrukcja obsługi BlueBuilt BBMA2M


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BlueBuilt BBMA2M (10 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
M
M
B
M
FLYING START.
Whoooo.
93
SET UP MONITOR ARM.
EN
Feed-through mount (B)
Drill a hole in your desk and feed the clamp through it.
Clamp mount (A)
Mount your monitor arm to your desk with the clamp.
2
STEP 4A.
Clamping attachment.
STEP 2A.
Clamping attachment.
STEP 2B.
Feed-through fixation.
STEP 3A.
Clamping attachment.
STEP 3B.
Feed-through fixation.
Place the clamp on the desk and tighten
the screw upwards until the stand is
fastened tightly.
Suitable for desks with a thickness
between 10 and 40mm.
Place the clamp attachment
4
on the
other side of the stand and tighten the
screw.
Suitable for desks with a thickness
between 45 and 85mm.
Twist the disc from the clamp
3
and then
twist and remove the clamp
attachment
4
.
Determine the thickness of your desk.
Depending on that, place the desk
clamp
3
in the upper or lower notches
and tighten the bolts
8
.
Drill a 10mm hole through your desk.
CHECKLIST.
Does the tick.
Check the VESA size of your
monitor. at way, you can
be sure it fits on the monitor
arm. e screw holes of the
VESA plate and your
monitor have to match.
Do you have a question?
Coolblue.nl/en/
customer-service
Coolblue isn’t liable for any
injury, damage, or arguments
with your partner caused by a
wrong installation.
EN
STEP 1.
Place the stand
5
on the tube
6
and
tighten it with the screw
8
.
44


Specyfikacje produktu

Marka: BlueBuilt
Kategoria: Nie skategoryzowane
Model: BBMA2M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BlueBuilt BBMA2M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane BlueBuilt

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane