Instrukcja obsługi Block & Block ALFA-100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Block & Block ALFA-100 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
ALFA-100
User Manual - English
1. INTRODUCTION
Dear client, Thank you for trust on at the time of purchasing your block&block
new ALFA- 010 lifting tower. Before handling, read fully and carefully this manual
and follow the safety instructions to obtain the best results using your new tower.
Use only original replacements from block&block. To do so, you should always
buy from authorized distributor. If non-original pieces were used or modications an
to the tower were made, the user would lose their guarantee rights. For any other
repair or inquiry you must always indicate the serial number of your lifting tower.
To guarantee maximum security in the usage of ALFA- 010 lifting tower, you
should carry out an annual revision in an authorized service centre by block&block,
where they will check the state of the tower in general and the wires, the winch and
the lock-security in particular.
BLOCK&BLOCK reserves the right to modify the specications and the
pieces of this product without previous notice.
2. TECHNICAL INFORMATION
ALFA-100 front load lifting tower has been designed to lift sound systems and
aluminium structures at dierent heights.
2.1- ALFA-100 lifting tower
2.2- Designed to lift vertically lighting and sound systems at dierent heights.
2.3- Maximum load kg (881.8 lb)./ 280 kg (617 ./ 200 kg (441 lb) : 400 lb)
2.4- Minimum load: 40 Kg (88.18 lb).
2,5- Maximum : 8 m (26.24 height ft).
2.6- Minimum height: 2,01 m (6.59 ft).
2.7- Base area: 2,51 2,15 m (8.2x 7.05 x ft).
2.8- Tower weight: 268 kg (590.8 lb).
2.9- Construction materials:
-Steel prole of carbon of S- -J0H type manufactured according to EN 10219 y 275
EN10305.5 standards.
-Aluminium alloys proles 6082/T6, manufactured according to EN 15088, EN 755,
EN 12020-2, EN 573 standards.
2.10- System composed of four aluminium proles powered manually by a winch
with a steel wire of 7mm and guided by steel pulley with ball bearing.
2.11- Winch: 1200 kg of maximum load with automatic brake of load holding.
Declaration of conformity CE, applied standards harmoniz DIN EN 13157, EN ed
12100 I y II, machine directive 2006/42/CE.
2.12- Galvanized steel wire of 7x19+0 type manufactured according to EN 13414-
1:2004 standards, 1770 N/mm2 resistance. Wire diameter: 7 mm
2.14- Safety mechanical triggers to block the section at dierent heights.
2.15- Safety triggers in the base to anchor the legs.
2.16- Stabilizer legs adjustable by means of threaded rod and steel plates with base
of anti-slipping rubber.
2.17- Antioxidant protection, primered with paint made of resins of epoxy and stove-
nished.
2.18- Bubble level to adjust the verticality of the tower.
2.19- Directional wheels to transport the lift folded.
2.20- Power supply ground terminal


Specyfikacje produktu

Marka: Block & Block
Kategoria: Niesklasyfikowane
Model: ALFA-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Block & Block ALFA-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Block & Block

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024