Instrukcja obsługi Blebox parkingsensor

Blebox Niesklasyfikowane parkingsensor

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blebox parkingsensor (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
SAFETY RULES
Connect only in accordance with the diagram presented in the
manual. Improper connections may be dangerous, it can damage
the controller, and loss of the warranty.
Do not connect the device to loads exceeding the permitted
values.
DANGER! Risk of electric shock! Even with the device turned o,
the outputs may be live. All assembly work should be ALWAYS
performed with the disconnected power circuit.
The installation of the device to a power mains that does not
meet the quality requirements dened by EN 50081-1, EN
50082-1, UL508, EN 60950, will result in the loss of the warranty.
PARKING SENSOR LED / LED RGB LIGHTING CONTROLLER
Before installing the sensor, disconnect the voltage in the supplied circuit.
Remember that all assembly work should be carried out with the power
supply disconnected.
The sensor should be mounted in a place protected from adverse environ-
mental conditions. It is advisable that the device is mounted in a stable and
stationary position.
Connect the LED strips and power supply to the device according to the
diagram.
Optionally, connect the LED lamp indicating the occupancy of the parking
space. When the vehicle is within range of the sensor, the lamp will remain on
continuously.
1INSTALLATION
sensor
bumper/number plate
frame/light
source
Mount the device vertically at the height of the farthest part of the car
(usually a bumper or license plate) as in the drawing below, so that the
connector is at the bottom.
Connect the power supply. Bring your hand or paper closer to the ParkingSen-
sor sensor, the color of the light should change with the detector:
2FIRST START-UP
3MOVEMENT OF THE VIRTUAL WALL
the time of the color illumination (red / blue / green) is 10 seconds, while the
optional LED lighting shines during the entire period of occupancy of the
parking space.
the range of the color changes are established in relation to the virtual wall. By
default, the virtual wall is at a physical distance of 2 cm from the sensor. It can
be adjusted in the physical range 2 cm..250 cm of the sensor by performing
the following steps:
1.
2.
3.
4.
5.
place a at object (for example, a piece of cardboard) in front of the
sensor at the desired distance, such as a virtual wall;
connect the power supply; wait 5 seconds; disconnect the power supply;
connect the power supply; wait 10 seconds; disconnect the power
supply;
connect the power supply; wait 15 seconds; disconnect the power
supply;
connect the power supply; wait until the LED strip turn on white and
then turn o, which means that the conguration has been saved; check
if the virtual wall works as expected.
CONNECTION DIAGRAM
green color
blue color
red colour
pulsing red color
you can move forward safely
you are close to the obstacle
stop the vehicle
stop the vehicle immediately!
option of signaling the occupied
space
LED STRIP
110 / 230V
12 - 24 V
+
power
supply
G
R
B
B R G - 0 +
LED STRIP*
*
-
TECHNICAL SPECIFICATIONS
supply voltage 7 – 24V DC
dimensions 50 x 40 x 25 mm
with connector: 50 x 50 x 25 mm
number of PWM channels 3 (RGB)
sensor ultrasonic, distance sensor
protection level IP20
operating temperature range from -10 to + 40°C
yes
calibration
of notied distance
maximum current
energy consumption
8 A
< 1 W
made of polyurethane composition
not containing halogens, self-extin-
guishing for thermal class B (130 °C)
open collector, 250mA
housing
type of output
MOVEMENT OF THE VIRTUAL WALL
for more information
visit our website
www.blebox.eu
or send us an email to:
info@blebox.eu
support is available at
support@blebox.eu
sensor
2..250 cm
4 cm
virtual wall
17 cm
48 cm
140 cm
2 cm
8 cm 6 cm 4 cm

Specyfikacje produktu

Marka: Blebox
Kategoria: Niesklasyfikowane
Model: parkingsensor

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blebox parkingsensor, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Blebox

Blebox

Blebox gateBox Instrukcja

1 Października 2024
Blebox

Blebox shutterBox Instrukcja

1 Października 2024
Blebox

Blebox parkingsensor Instrukcja

1 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024