Instrukcja obsługi Blaupunkt GTr 8120 A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt GTr 8120 A (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Operating and Installation Instructions
ACTIVE SUBWOOFER
GTr 8120 A
Remote Control
Disclaimer
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time
without any notice.
A control solely via the right or left channel is
also possible since the low-frequency portion
of the music is generally identical on both
channels.
In no event shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property or life,
improper storage, whatsoever arising out of
or connected with the use or misuse of our
products.
USA & CANADA : Product not intended for sale
in the United States and Canada. If purchased
in the U.S. or Canada, this product is pur-
chased as-is. No warranty, express or implied is
provided in the U.S. and Canada.
Proper system planning is vital in order to max-
imize the devices performance and road safety.
Plan your installation carefully to avoid compro-
mising performance reliability of the system.
Consult an authorized Blaupunkt dealer for instal-
lation or reparation. Read the manual carefully
before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during instal-
lation and wiring connection : -
Installation and Connection Instructions
Intergrated Fuse
Switching On/O
Voltage Supply
1
INTRODUCTION
Disconnect the negative terminal of the
battery. Refer to the safety notes of vehicle
manufacturer.
Ensure positions of the holes are nowhere
near the vehicle component to avoid any
damage during drilling.
Ensure cross section of the cable is no less
than 2.5mm if the positive and negative
cables are too long.
Incorrect installation may result in malfunc-
tion of the device or the car sound system.
Select a dry and well-ventilated location to
install the device.
The device must not be installed on the rear
shelf, rear seats or exposed locations.
The installation location must be suitable for
screw holes and have stable ground support.
The integrated fuse in the device protects
the output voltage and the entire electrical
system in case of malfunction. Do not replace
damaged fuse with higher current.
This device will automatically turn on if audio
signal is detected. The device will also auto-
matically turn o if audio signal is received.
Use the supplied power extension cable to
connect to the positive battery terminal.
Firmly and carefully connect the ground lead
to a bare metal point on the vehicle chassis.
The control of the device should be a
two-channel control, either via the preampli-
er output of the car sound system.
Turn the sub level knob to adjust the volume
to the desired level.
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power Light
Phase (0~ 180)
Low Pass (50Hz~ 150Hz)
Bass Boost (0 ~ +12dB)
Input Gain (Min ~ Max)
Remote Control Input
Low Level Input
High Level Input
Fuse
Ground (Chasis)
Remote
+12V Battery
Auto Power On
Protection LED Light
FUNCTIONS CONTROLLING DIAGRAM
1 2 3 4 5 6 7 8 9 10
13 111214
INSTALLATION


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: nieskategoryzowany
Model: GTr 8120 A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt GTr 8120 A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Blaupunkt

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024