Instrukcja obsługi Blaupunkt BM 1402 CM4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt BM 1402 CM4 (5 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
VELOCITY POWER
BMW PLUG & PLAY
SPEAKER UPGRADE
Operating and Installation Instructions
BM 1402 CM4 BM 1402 CU4
INTRODUCTION SPECIFICATION
1
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your instal-
lation carefully to avoid compromising performance
reliability of the system. Consult an authorized Blaupunkt
delaler for installation or reparation. Read the manual
carefullt before operating the device for the rst time.
Safety Notes
Ensure to folow below safety notes during installation
and wiring connection: -
Installation and Connection Instructions
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
Disconnect the negative terminal of the battery. Refer
to the safety notes of the vehcle manufacturer.
Ensure positions of the holes are nowhere near the ve
-
hicle component to avoid any damage during drilling.
Ensure cross section of the cable is no less than
2.5mm if the positive and negative cables are too
long.
Incorrect installation may result in malfunction of the
device or the car sound system.
Select a dry and well-ventilated location to install
the device.
The device must not be installed in overly exposed
location such on therear shelf, rear seat etc.
The installation location must be suitable for screw
holes and have stable ground support.
Use the supplied power extension cable to connect to
the positive battery terminal.
Firmly and carefully connect the ground lead to a bare
metal point on the vehicle chassis.
The control of the device should be a two-channel
control, either via the preamplier output of the car
sound system.
A control solely via the right or left channel is also
possible since the low-frequency portion of the music
is generally identical on both channels.
Voltage Supply
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time
without any notice.
INSTALLATION INSTALLATION
Carefully remove the trim piece with the help of door
trim removal to prevent damage
Note that the door panel is xed by numerous plastic
clips, carefully pull the door away and disconnect all
wiring doorlatch cables. Be very careful to avoid the
damage of the plastic clips during door panel removal
Remove front door card
Remove all 3 screws that hold the mid-range speaker
Lift up the trim piece before slowly slide outward to re-
lease the trim from the door panel as seen in photograph
Remove the door handle
3
Mid-range speakers
1 2
3
4
6
5


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: nieskategoryzowany
Model: BM 1402 CM4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt BM 1402 CM4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Blaupunkt

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024