Instrukcja obsługi BLANCO BCCK32NX

BLANCO piec BCCK32NX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BLANCO BCCK32NX (9 stron) w kategorii piec. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

Instructions for the Use and Care and Installation of

BCCK60N

BCCK60X

BCCK6X

BCCK6N

BCCK32NX

Ceran Knob Control Cook Top.

- 3 -

Dear Customer

You will find that the clean lines and modern look of your Blanco cooktop blends in

perfectly with your kitchen décor. It is easy to use and performs to a high standard.

Blanco also makes a range of products that will enhance your kitchen – such as

ovens, rangehoods, dishwashers, microwaves, sinks and taps. There are models

to complement your new Blanco cooktop. Blanco now has a range of laundry

products to choose from.

Of course, we make every effort to ensure that our products meet all your

requirements, and our Customer Relations Department is at your disposal, to

answer all your questions and to listen to all your suggestions.

Please complete the warranty section of this manual and keep your receipt as

proof of purchase. Retain all documents relating to the purchase of Blanco product.

Blanco is committed to providing increasingly efficient products that are easy to

use, respect the environment and are attractive and reliable.

BLANCO

- 4 -

INSTALLATION

All operations relative to installation (electric connec-

tion) should be carried out by skilled personnel in con-

formity with the rules in force. As for the

specific instructions see part pertaining to installer.

This instructions book is valid for different models.

Please consider only the relative paragraphs.

INSTRUCTIONS FOR THE INSTALLER

The present instructions are for the skilled installer

as a guide to installation, regulation and maintenance

in compliance with the laws and the rules In force.

1.1 ELECTRICAL CONNECTIONS ( Fig.1)

For models BCCK60 and BCCK6 refer to diagrams on

page 3 and for model BCCK32NX refer to diagrams on

page 4.

Before carrying out the electrical connections be sure

that:

—the characteristics of the cooktop are indicated on

the part number plate applied to the bottom of the work

top;

—the system is provided with effective ground in com-

pliance with the rules and the provisions of law in force.

The ground is binding according to the law.

In case the appliance isn’t provided with cable and/or

with relative plug choose material which is suitable for

the load indicated on the part number plate and for the

working temperature. At any point, the cable should not

reach a temperature 50°C higher than the room tempera-

ture.

If one wishes a direct connection to the line, it’s neces-

sary to interpose an omnipolar switch with minimum opening

between the contacts of 3mm dimensioned for the plate

load and in conformity with the rules in force (the ground

cable yellow/green should be not interrupted by the

switch).

The plug on the omnipolar switch should be easily reach-

able with apparatus installed.

1.2 POSITIONING ( Fig.2)

For models BCCK60 and BCCK6 refer to diagrams on

page 3 and for model BCCK32NX refer to diagrams on

page 4.

The appliance is provided to be built-in a bench top as

shown in Figure 2. Preset the sealing agent along all the

perimeter. (Cut dimensions fig. 2)

For flush mounting the cooktop refer page 6.

Install the appliance into the benchtop using the 4 brack-

ets and taking into consideration the thickness of the

benchtop.

NB. The manufacturer declines all responsibility in

case the above and the usual safety rules aren’t re-

spected.

INSTRUCTIONS FOR THE USER

2.1 WARNINGS:

- The appliance is not intended for use by young chil-

dren or infirm persons without supervision.

- Young children should be supervised to ensure that

they do not play with the appliance.

- WARNING: If the surface of the ceramic cooktop is

cracked, switch off the appliance to avoid the possibility

of electric shock.

- Do not use a steam cleaner to clean this appliance.

- If the supply cord is damaged, it must be replaced by

the manufacturer or it’s service agent or a similarly quali-

fied person in order to avoid a hazard.

2.2 USE

Rotate the knob to increase or decrease the heat. De-

pending on the model, heat is increased by a higher

number or increase of the thickness of the line indicator.

Setting the power for models BCCK6 fitted with extended

zones:

a) Turn the control knob in a clockwise direction to

activate the internal zone. When you arrive at the end,

turn the control knob a little more (still in a clockwise

direction) until you hear a 'click'. This action will activate

the double zone at maximum power level. By turning the

control knob anti-clockwise you will decrease the power

level of both the internal and external zones.

Note: At position zero, the cooktop is OFF. If you turn

the control knob anti-clockwise, you will activate both

the internal and external zones at maximum level. You

can decrease the power by continuing to turn the control

knob anti-clockwise.

Clean the hob before using it for the first time. After-

wards, switch on the elements to the highest level one

after the other, without pots, for three minutes in order

to eliminate any odours due to newness and so that any

moisture that may still be in the heating elements may

evaporate. This is necessary so that the electronic

circuits function properly.

2.3 PILOT LIGHTS (fig. 4)

The pilot lights are ON when:

—at least one element is turned on; (fig. 4a)

—the top temperature at the indicated spot is higher

than 50°C (fig. 4b)

2.4 SAUCEPANS (fig. 3)

When one makes use of heating elements, we advise

saucepans with a flat bottom having the same diameter

or slightly larger than that of the hot area. The contain-

ers should not have rough bottoms in order to avoid

scratching the heat surface of the top; (fig. 3)

We recommend the use of only Stainless Steel sauce-

pans, which are flat based and excellent conductors of

heat, therefore shortening the cooking time and reacting

to temperature changes more rapidly than other cookware.

The use of cast iron, copper based and aluminium

saucepans and pots is not recommended as these can

cause damage to the cooktop surface. The base of all

Specyfikacje produktu

Marka:	BLANCO
Kategoria:	piec
Model:	BCCK32NX
Kolor produktu:	Czarny
Napięcie wejściowe AC:	100 - 127 V
Wysokość produktu:	43.4 mm
Szerokość produktu:	439.9 mm
Głębokość produktu:	315 mm
Waga produktu:	3970 g
Podręcznik użytkownika:	Tak
Szerokość opakowania:	431.8 mm
Wysokość opakowania:	116.8 mm
Głębokość opakowania:	518.2 mm
Certyfikaty:	RoHS, UL 60950-1, UL 1449, CAN/CSA-C22.2 No. 60950-1, FCC Part 15 Class A, REACH, NOM
Kraj pochodzenia:	Chiny
Standardy komunikacyjne:	IEEE 802.1D,IEEE 802.1Q,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3az,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	5 - 95 %
Zarządzanie przez stronę www:	Tak
Układ:	1U
Kod zharmonizowanego systemu (HS):	8517.62.0020
Waga wraz z opakowaniem:	5220 g
Wysokość skrzyni wzorcowej (zewnętrznej):	116.8 mm
Długość skrzyni głównej (zewnętrznej):	518.2 mm
Waga brutto obudowy głównej (zewnętrznej):	5220 g
Szerokość skrzyni zbiorczej (zewnętrznej):	431.8 mm
Szyfrowanie / bezpieczeństwo:	SNMP
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-10 - 70 °C
Obsługa sieci VLAN:	Tak
Możliwości montowania w stelażu:	Tak
Przycisk reset:	Tak
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	0 - 3000 m
Typ przełącznika:	Zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	24
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Złącze zasilania:	DC-in jack
Obsługa 10G:	Nie
Wielkość tabeli adresów:	16000 wejścia
Przepustowość rutowania/przełączania:	52 Gbit/s
Liczba zainstalowanych modułów SFP:	2
Lista kontrolna dostępu (ACL):	Tak
Produkty w skrzyni głównej (zewnętrznej):	1 szt.
Uchwyty mocowania dołączone:	Tak
Przełącznik wielowarstwowy:	L2
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	10000
Automatyczne MDI/MDI-X:	Tak
Port konsoli:	RJ-45
Funkcje DHCP:	DHCP client
Kontrola wzrostu natężenia ruchu:	Tak
Wiązanie adresów IP-MAC-Port:	Tak