Instrukcja obsługi Blackmore BJS-195BT

Blackmore głośnik BJS-195BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blackmore BJS-195BT (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Samson Electronics Inc.
3400 E. Slauson Ave.
Maywood, CA 90270
Ph: 323.585.6393
Fax: 323.585.6202
Web: hp://www.blackmoremobile.com
BJS- BT 195 Portable and Amplied PA Speaker
Introducon:
The BJS-195BT is a portable and amplied PA speaker with brilliant LED illuminaon. It has a full feature, built in
MP3 player with USB and SD card inputs Bluetooth connectivity and FM radio. Audio source input opons include ,
a 3.5mm Aux audio input and RCA stereo inputs. Expandability is achieved by an 8 ohm speaker (speakon) output
for passive monitors and a set of RCA Stereo connecons. PA capabilies are achieved by a ¼” standard MIC input
with adjustable gain control. Sound is produced by a 15 Subwoofer and 44MM Titanium Diaphragm tweeter ”
driver behind a molded horn producing a total of 2200W of peak power.
Features:
Amplied
MP3 Player with USB and SD card inputs
8ohm Speaker output (Speakon)
LED illuminaon
¼” adjustable MIC input
2200W
Bluetooth Connectivity
FM Radio
Included Collapsible tripod speaker stand
Cauon:
Please read All Operang Instrucons before using this product
Avoid electrical shock, DO NOT OPEN THIS UNIT, THERE ARE NO REPLACEABLE PARTS INSIDE. Please refer to your
warranty information for service.
Do not Expose this product to Moisture, Water, Rain or Snow. Keep away from direct heat sources. Damaged items will
not be accepted for warranty
Do not clean this unit with solvents or chemicals
Insure that all volume and gain controls are set to “0” when connecng source units
1. SD Card Input . Mode Select 4
2. USB input LCD Display5.
3. IR input Previous Track/Station6.
7. Next track/Staon
8. Repeat/shue
9. Play/pause/scan
12. Line in level control
10. MIC gain control 13. Aux audio in
11. ¼” MIC input 14. Clip indicator
15. Power on Indicator
19. RCA Stereo line in 16. Master volume control
17. Master treble control
18. Master bass control
20. RCA Stereo line out
21. Speakon output
22. LED illuminaon switch
23. Amplier heat sink
24. Master Power Switch
25. AC power plug input
Funcons:
1. SD Card Input: This is a standard size SD card input. Capable of reading cards up to 4GB. Music les
must be formaed as MP3 in order to be played via SD card.
2. USB input: This is a full size USB2.0 female input. It has a read capacity of 4GB. Music les must be
formaed as MP3 in order to be played via USB.
3. IR input This receives the signal from the remote control. :
4. Mode: Press to scroll between Bluetooth,MP3,line in and FM mode
5. LCD Display: Displays Track and Mode informaon
6. Previous track/FM staon: Press this to go back 1 track on the mp3 player or back 1 FM staon
7. Next track/FM staon: Press this to go forward 1 track on the mp3 player or forward 1 FM staon
8. Repeat/Shue: Press to repeat a track, shue all tracks, or repeat all tracks
9. Play/Pause/Scan: Press to start an MP3 track or to pause it. Press to scan and program FM staons
in FM mode.
10. MIC gain control: This controls the amount of signal received by the microphone
11. ¼” MIC input
12. Line in level control: This controls the amount of signal received by the line in audio source.
13. AUX Audio in: 3.5mm AUX audio input for external audio sources.
14. Clip indicator: This will illuminate during over amplicaon or too much audio signal input.
15. Power on indicator: Illuminates when the unit is turned on.
16. Master Volume control: This controls the overall volume of the speaker and supersedes all volume controls.
17. Master Treble control: This controls the amount of treble frequencies produced by the speakers.
18. Master Bass control: This controls the amount of bass frequencies produced by the speakers.
19. RCA Stereo Line in: This provides a 2CH. RCA Stereo input.
20. RCA Stereo Line out: This provides a 2CH. RCA Stereo output.
21. Speakon Output: This provides amplied signal to a passive 8 ohm Speaker.
22. LED illuminaon switch: Use this to turn the LED illuminaon on or o.
23. Amplier Heatsink: This dissipates the heat generated by the amplier.
24. Master Power Switch: This turns the unit on or o.
25. AC power plug input: Please only use the supplied AC cable.

Specyfikacje produktu

Marka: Blackmore
Kategoria: głośnik
Model: BJS-195BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blackmore BJS-195BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Blackmore

Blackmore

Blackmore BTU-5001 Instrukcja

25 Września 2024
Blackmore

Blackmore BJS-152BT Instrukcja

25 Września 2024
Blackmore

Blackmore BJS-195BT Instrukcja

25 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024