Instrukcja obsługi Black Box MT195A-T1

Black Box Wzmacniacz sygnału WiFi MT195A-T1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black Box MT195A-T1 (20 stron) w kategorii Wzmacniacz sygnału WiFi. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
CUSTOMER
SUPPORT
INFORMATION
Order in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: toll-free 877-877-BBOX
FREE technical support, 24 hours a day, 7 days a week: Call or fax 724-746-5500 724-746-0746
Mail order: , 1000 Park Drive, Lawrence, PA 15055-1018Black Box Corporation
Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
NETWORK SERVICES
®®
T1/E1 Link Extenders
Important
This is a Class A device and is intended for use in a light industrial environment. It is not intended nor
approved for use in an industrial or residential environment.
OCTOBER 2007
MT195A-T1
MT196A-E1
T1/E1 LINK EXTENDERS
2
CE NOTICE
We certify that the apparatus identified in this document conforms to the require-
ments of Council Directive 1999/5/EC on the approximation of the laws of the
member states relating to Radio and Telecommunication Terminal Equipment
and the mutual recognition of their conformity.
RADIO AND TV INTERFERENCE
This equipment generates and uses radio frequency energy, and if not installed
and used properly—that is, in strict accordance with the manufacturer's instruc-
tions—may cause interference to radio and television reception. This equipment
has been tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that interference will not
occur in a particular installation. If the equipment causes interference to radio or
television reception, which can be determined by disconnecting the cables, try to
correct the interference by one or more of the following measures: moving the
computing equipment away from the receiver, re-orienting the receiving antenna,
and/or plugging the receiving equipment into a different AC outlet (such that the
computing equipment and receiver are on different branches).
FCC PART 68
This equipment complies with Part 68 of FCC rules and the requirements adopted
by ACTA. On the bottom side of this equipment is a label that contains—among
other information—a product identifier in the format US: AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
The method used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA.
If this equipment causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, opera-
tions or procedures that could affect the operation of the equipment. If this hap-
pens the telephone company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
T1/E1 LINK EXTENDERS
3
If trouble is experienced with this equipment, for repair or warranty information,
please contact our company. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment
until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for
information.
INDUSTRY CANADA NOTICE
This equipment meets the applicable Industry Canada Terminal Equipment Tech-
nical Specifications. This is confirmed by the registration number. The abbrevia-
tion, IC, before the registration number signifies that registration was performed
based on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved the
equipment.
This Declaration of Conformity means that the equipment meets certain telecom-
munications network protective, operational and safety requirements. The
Department does not guarantee the equipment will operate to the user's satisfac-
tion. Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. In
some cases, the company’s inside wiring associated with a single line individual
service may be extended by means of a certified connector assembly (telephone
extension cord). The customer should be aware that compliance with the above
condition may not prevent degradation of service in some situations. Repairs to
some certified equipment should be made by an authorized maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications com-
pany cause to request the user to disconnect the equipment. Users should ensure
for their own protection that the ground connections of the power utility, tele-
phone lines and internal metallic water pipe system, are connected together. This
protection may be particularly important in rural areas.

Specyfikacje produktu

Marka: Black Box
Kategoria: Wzmacniacz sygnału WiFi
Model: MT195A-T1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black Box MT195A-T1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wzmacniacz sygnału WiFi Black Box

Black Box

Black Box MT195A-T1 Instrukcja

5 Września 2024
Black Box

Black Box LB323A Instrukcja

4 Września 2024
Black Box

Black Box LPR110 Instrukcja

29 Sierpnia 2024
Black Box

Black Box LB320A Instrukcja

29 Sierpnia 2024
Black Box

Black Box LB510A-R2 Instrukcja

18 Sierpnia 2024
Black Box

Black Box VR-HDMI-4K60 Instrukcja

17 Sierpnia 2024
Black Box

Black Box LinkGain Instrukcja

15 Sierpnia 2024
Black Box

Black Box IC408A-R2 Instrukcja

7 Sierpnia 2024

Instrukcje Wzmacniacz sygnału WiFi

Najnowsze instrukcje dla Wzmacniacz sygnału WiFi

Mercusys

Mercusys ME80X Instrukcja

24 Marca 2025
Ubiquiti Networks

Ubiquiti Networks UniFi Device Bridge Instrukcja

21 Lutego 2025
Icron

Icron USB 2.0 Ranger 2304PoE Instrukcja

20 Lutego 2025
Icron

Icron USB Ranger 2204 Instrukcja

20 Lutego 2025
Ubiquiti Networks

Ubiquiti Networks UniFi Device Bridge Pro Instrukcja

20 Lutego 2025
Axis

Axis C8110 Instrukcja

20 Lutego 2025
Tenda

Tenda A18 Pro Instrukcja

5 Lutego 2025
Strong

Strong Repeater 300 V2 Instrukcja

5 Lutego 2025
TP-Link

TP-Link RE220 Instrukcja

12 Stycznia 2025
Manhattan

Manhattan 525664 Instrukcja

12 Stycznia 2025