Instrukcja obsługi Black & Decker Matrix BDCMTR

Black & Decker Narzędzie wielofunkcyjne Matrix BDCMTR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker Matrix BDCMTR (24 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

INSTRUCTION MANUAL

ROUTER

ATTACHMENT

Thank you for choosing BLACK+ ! DECKER

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+ DECKER

purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.

Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPA OL EN LA CONTRAPORTADA.N

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

CATALOG NUMBER

BDCMTR

To register your new product, visit

www.BlackandDecker.com/NewOwner

WARNING:

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with

your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using

this attachment. Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord.

Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.

• Use clamps or another practical way to secure and support the workpiece to a stable platform.

Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.

• Thiswillenablebettercontrolofthetool.Keep handles dry, clean, and free from oil and grease.

• Keep hands away from cutting area. Never reach under the workpiece for any reason.

Keep the router base rmly in contact with the workpiece when cutting. Hold the router

only by identied gripping surfaces as identied in this manual (see Using the Router).

Theseprecautionswillreducetheriskofpersonalinjury.

Kickback is a sudden reaction to a pinched, bound or misaligned router bit, causing an

uncontrolled router to lift up and out of the workpiece toward the operator.

• Keep your body positioned parallel to the direction of the cut, not behind the direction

of the cut.KICKBACK could cause the router to jump opposite the direction of the cut.

• Dullcuttersmaycausetheroutertoswerveorstallunderpressure.Use sharp cutters.

• Itmaybeextremelyhot.Never touch the bit immediately after use.

• IftheBe sure that the motor has stopped completely before you lay the router down.

cutterheadisstillspinningwhenthetoolislaiddown,itcouldcauseinjuryordamage.

• IfthebitisincontactBe sure that the router bit is clear of the workpiece before starting the motor.

withtheworkpiecewhenthemotorstartsitcouldmaketherouterjump,causingdamageorinjury.

• Only use router bits with a shank diameter of 1/4”.

• Only use router bits rated at least equal to the maximum speed marked on the tool.

• UseoflargerthanDo not use router bits with a diameter greater than 1-3/8” (35mm).

recommendedbitscanresultinahazard.

• Not intended to be used with a router table. Do not use the tool in an inverted position.

• Do not attempt to use the tool in a stationary mode.

• Make sure collet nut is securely tightened to prevent router bit from slipping during use.

WARNING:ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also

use face or dust mask if drilling operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

•ANSI Z87.1 eye protection (CAN/CPA Z94.3),

•ANSI S12.6 (S3.19) hearing protection,

•NOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to the state of California to cause

cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

 • crystalline silica from bricks and cement and other masonry products, and

 • arsenic and chromium from chemically-treated lumber.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: DANGER, WARNING, OR CAUTION. Indicates 

Maybeusedinconjunctionwithothersymbolsorpictographs.

DANGER: Indicateshazardoussituationwhich,ifnotavoided,willresultindeathorseriousinjury.

WARNING: Indicateshazardoussituationwhich,ifnotavoided,couldresultindeathor

seriousinjury.

CAUTION: Indicatesahazardoussituationwhich,ifnotavoided,couldresultinminoror

moderateinjuryorpropertydamage.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are specially designed to lter out

microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and

other construction activities. Wear protective clothing and wash exposed areas with

soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote

absorption of harmful chemicals.

WARNING:Use of this tool can generate and/or disperse dust, which may cause

serious and permanent respiratory or other injury. Always use NOSH/OSHA approved

respiratory protection appropriate for the dust exposure. Direct particles away from face and

body. Always operate tool in well-ventilated area and provide for proper dust removal. Use dust

collection system wherever possible.

WARNING: ALWAYS wear proper personal hearing protection that conforms to

ANSI S12.6 (S3.19) during use.Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

SYMBOLS

Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheirdefinitionsare

asfollows:

V amperes .................volts A .................

Hz watts ............... hertz W .................

min minutes ............. or AC ...... alternating current

or DC direct current .. no ................ no load speed

...............Class I Construction earthing terminal ................

(grounded) safety alert symbol ................

................Class II Construction .../min or rpm.....revolutions or reciprocation

(double insulated) per minute

...............Read instruction manual before use

................ Use proper respiratory protection

...............Use proper eye protection Use proper hearing protection ................

Whenusinganextensioncord,besureto

useoneheavyenoughtocarrythecurrent

yourproductwilldraw.Anundersizedcord

willcauseadropinlinevoltageresulting

inlossofpowerandoverheating.The

followingtableshowsthecorrectsizetouse

dependingoncordlengthandnameplate

ampererating.Ifindoubt,usethenext

heaviergage.Thesmallerthegagenumber,

theheavierthecord.

SAVE THESE INSTRUCTIONS

Minimum Gauge for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

  (0-7,6m)(7,6-15,2m)(15,2-30,4m)(30,4-45,7m)

240V 0-50 51-100 101-200 201-300

(0-15,2m)(15,2-30,4m)(30,4-60,9m)(60,9-91,4m)

Ampere Rating

More Notmore AmericanWireGauge

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 NotRecommended

Functional Description

Figure A

1.Routerattachment

2.Spindlelockbutton

3.Activelock-offbutton

4.NutandCollet

5.Depthstopbar

6.Depthofcutscale

7.Chipshield

8.Base

Notshown:

Wrench

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Narzędzie wielofunkcyjne
Model:	Matrix BDCMTR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker Matrix BDCMTR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Narzędzie wielofunkcyjne Black & Decker

Black & Decker MT18 Instrukcja

11 Stycznia 2025

Black & Decker Matrix BDCDMT120IA Instrukcja

21 Września 2024

Black & Decker MTOS4 Instrukcja

6 Września 2024

Black & Decker BDCOS18 Instrukcja

6 Września 2024

Black & Decker MT280 Instrukcja

1 Września 2024

Black & Decker HPL108 Instrukcja

29 Sierpnia 2024

Black & Decker MT300SA2 Instrukcja

28 Sierpnia 2024

Black & Decker KA280 Instrukcja

26 Sierpnia 2024

Black & Decker MT300KA Instrukcja

25 Sierpnia 2024

Black & Decker BDCMTO Instrukcja

25 Sierpnia 2024

Instrukcje Narzędzie wielofunkcyjne

Najnowsze instrukcje dla Narzędzie wielofunkcyjne

Vonroc OT505DC Instrukcja

9 Stycznia 2025

Workzone WZMS 10,8 Li Instrukcja

31 Grudnia 2025

Einhell TE-MG 18/1 Li Instrukcja

30 Grudnia 2025

EGO MRC2306E Instrukcja

28 Grudnia 2024

Powerblade PC4MT5 Instrukcja

10 Grudnia 2024

EGO PH1420E Instrukcja

8 Grudnia 2024

Parkside PAMFW 20-Li A1 Instrukcja

15 Października 2024

Güde GGF 620 Instrukcja

14 Października 2024

Makita DTM52Z Instrukcja

9 Października 2024

Ozito PXPPHTK-258 Instrukcja

8 Października 2024