Instrukcja obsługi Black & Decker LPHT120
Black & Decker
para nożyczek
LPHT120
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker LPHT120 (44 stron) w kategorii para nożyczek. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/44
1
INSTRUCTION MANUAL
20V MAX* LITHIUM POLE
HEDGE TRIMMER
Thank you for choosing Black+Decker!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your go to Black+Decker purchase, http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call 1- -544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an 800
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. The nominal voltage is 18.
CATALOG NUMBERS
LPHT120
To register your new product, call 1-800-544-6986 or visit www.BlackandDecker.com/NewOwner
2
matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions .
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
nonskid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The
information it contains relates to protecting YOUR SAFETY and
PREVENTING PROBLEMS. The symbols below are used to help you
recognize this information.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warningS and inStructionS for future reference
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b)
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations different from those intended
could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a)
Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
3
c) When battery pack is not in use, keep it away from other
metal
objects like paper clips, coins, keys, nails, screws, or
other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a
fire.
d) Under abusive conditions, liquid may be ejected from the battery,
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
•
Keep all parts of the body away from the cutter blade. Do not
remove cut material or hold material to be cut when blades
are moving. Make sure the switch is off when clearing jammed
material. Blades coast after turn off. A moment of inattention while
operating the hedge trimmer may result in serious personal injury.
DANGER: Keep hands away from blade. Contact with blade
will result in serious personal injury.
•
Use both hands when operating the hedge trimmer. Using one hand
could cause loss of control and result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade
stopped.
When transporting or storing the hedge trimmer always fit
the cutting device cover.
Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
•
Hold the power tool by insulated gripping surfaces only, because
the cutter blade may contact hidden wiring or its own cord.
Cutter blades contacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an electric shock.
• Keep cable away from cutting area. During operation the
extension cord may be hidden in shrubs and can be accidentally
cut by the blade.
•Checkthehedgeforforeignobjects,e.g.wirefences.
•Bewareofoverheadwires.
WARNING: Only use the handle and guard properly assembled
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | para nożyczek |
| Model: | LPHT120 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker LPHT120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje para nożyczek Black & Decker
8 Października 2024
5 Września 2024
4 Września 2024
Instrukcje para nożyczek
- para nożyczek Milwaukee
- para nożyczek Hazet
- para nożyczek DeWalt
- para nożyczek Silverline
- para nożyczek Rowenta
- para nożyczek Makita
- para nożyczek RYOBI
- para nożyczek Fein
- para nożyczek Hitachi
Najnowsze instrukcje dla para nożyczek
7 Października 2024
3 Października 2024
23 Września 2024
23 Września 2024
22 Września 2024
17 Września 2024
16 Września 2024
14 Września 2024
13 Września 2024
12 Września 2024