Instrukcja obsługi Black & Decker KR550K
Black & Decker
Wiertarki udarowe
KR550K
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker KR550K (44 stron) w kategorii Wiertarki udarowe. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/44
1
3
95 6 7 4
8 1 2
English 3
Deutsch 6
Français 10
Italiano 13
Nederlands 16
Español 19
Português 22
Svenska 25
Norsk 28
Dansk 31
Suomi 34
∂ÏÏËÓÈη 37
2
11 9
E
C
B
D
A
3
10
4
1211 13
11
15
1416
17
3
ENGLISH
Intended use
Your Black & Decker drill has been designed for drilling in
wood, metal, plastics and masonry as well as for screwdriving
purposes. This tool is intended for consumer use only.
Safety instructions
Warning! When using mains-powered tools, basic safety
precautions, including the following, should always be
followed to reduce the risk of fire, electric shock,
personal injury and material damage.
Read all of this manual carefully before operating the tool.
Retain this manual for future reference.
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the
tool where there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
work area or to touch the tool or mains cable.
Dress properly
Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Preferably wear rubber gloves and
non-slip footwear when working outdoors. Wear protective
hair covering to keep long hair out of the way.
Personal protection
Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or flying particles.
Hearing protection should be worn.
Guard against electric shock
Prevent body contact with earthed or grounded surfaces
(e.g. pipes, radiators, cookers and refrigerators). Electric safety
can be further improved by using a high-sensitivity
(30mA/30 mS) residual current device (RCD).
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch what you are doing. Use common sense. Do not operate
the tool when you are unconcentrated.
Secure workpiece
Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.
Connect dust extraction equipment
If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected and
properly used.
Remove keys and adjusting wrenches
Always check that keys and adjusting wrenches are removed
from the tool before operating the tool.
Extension cables
Before use, inspect the extension cable and replace if
damaged. When using the tool outdoors, only use extension
cables intended for outdoor use. Up to 30 m of Black & Decker
extension cable can be used without loss of power.
Use appropriate tool
The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a
heavy-duty tool. The tool will do the job better and safer at the
rate for which it was intended. Do not force the tool.
Warning! The use of any accessory or attachment or performance
of any operation with this tool other than those recommended
in this instruction manual may present a risk of personal injury.
Check for damaged parts
Before use, carefully check the tool and mains cable for
damage. Check for misalignment and seizure of moving parts,
breakage of parts, damage to guards and switches and any
other conditions that may affect its operation. Ensure that the
tool will operate properly and perform its intended function.
Do not use the tool if any part is damaged or defective. Do not
use the tool if the switch does not turn it on and off. Have any
damaged or defective parts repaired or replaced by an
authorised repair agent. Never attempt any repairs yourself.
Unplug the tool
Unplug the tool when it is not in use, before changing any parts
of the tool, accessories or attachments and before servicing.
Avoid unintentional starting
Do not carry the tool with a finger on the on/off switch.
Be sure that the tool is switched off when plugging in.
Do not abuse cord
Never carry the tool by its cord or pull it to disconnect from the
socket. Keep the cord away from heat, oil and sharp edges.
Store idle tools
When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean
and free from oil and grease.
Repairs
This tool complies with relevant safety requirements. Repairs
should only be carried out by qualified persons using original
spare parts; otherwise this may result in considerable danger
to the user.
Electrical safety
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | Wiertarki udarowe |
| Model: | KR550K |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker KR550K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wiertarki udarowe Black & Decker
15 Października 2024
9 Sierpnia 2024
8 Sierpnia 2024
7 Sierpnia 2024
6 Sierpnia 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Wiertarki udarowe
- Wiertarki udarowe AEG
- Wiertarki udarowe Worx
- Wiertarki udarowe Milwaukee
- Wiertarki udarowe Bosch
- Wiertarki udarowe Parkside
- Wiertarki udarowe DeWalt
- Wiertarki udarowe Makita
- Wiertarki udarowe RYOBI
- Wiertarki udarowe Meec Tools
- Wiertarki udarowe Ferm
- Wiertarki udarowe Hitachi
- Wiertarki udarowe HiKOKI
- Wiertarki udarowe Skil
- Wiertarki udarowe Stayer
- Wiertarki udarowe Tryton
- Wiertarki udarowe Ronix
- Wiertarki udarowe Luxor
- Wiertarki udarowe Bort
- Wiertarki udarowe Joka
- Wiertarki udarowe Valex
- Wiertarki udarowe Kress
- Wiertarki udarowe Pattfield
- Wiertarki udarowe Batavia
Najnowsze instrukcje dla Wiertarki udarowe
12 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
10 Października 2024
9 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024