Instrukcja obsługi Black & Decker KR510XC
Black & Decker
maszyna wiertnicza
KR510XC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker KR510XC (56 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/56
1
www.blackanddecker.com
13
2
5
6 4
English 3
Deutsch 7
Français 11
Italiano 15
Nederlands 19
Español 23
Português 27
Svenska 31
Norsk 35
Dansk 39
Suomi 43
∂ÏÏËÓÈη 47
2
21
12 11
3
9
8
10
E
C
B
D
A
5 7
3
ENGLISH
Intended use
Your Black & Decker hammer drill has been designed for drilling
in wood, metal, plastics, and masonry as well as for screwdriving
purposes. This tool is intended for consumer use only.
General safety rules
Warning! Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious
injury. The term “power tool” in all of the warnings listed
below refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
1. Work area
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | maszyna wiertnicza |
| Model: | KR510XC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker KR510XC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna wiertnicza Black & Decker
29 Czerwca 2024
2 Czerwca 2024
2 Czerwca 2024
28 Maja 2024
25 Maja 2024
22 Maja 2024
18 Maja 2024
16 Maja 2024
15 Maja 2024
14 Maja 2024
Instrukcje maszyna wiertnicza
- maszyna wiertnicza Worx
- maszyna wiertnicza Milwaukee
- maszyna wiertnicza Bosch
- maszyna wiertnicza Parkside
- maszyna wiertnicza Festool
- maszyna wiertnicza Stanley
- maszyna wiertnicza DeWalt
- maszyna wiertnicza Einhell
- maszyna wiertnicza Silverline
- maszyna wiertnicza Makita
- maszyna wiertnicza Ozito
- maszyna wiertnicza RYOBI
- maszyna wiertnicza DEDRA
- maszyna wiertnicza Baumr-AG
- maszyna wiertnicza Hilti
- maszyna wiertnicza Dremel
- maszyna wiertnicza Velleman
- maszyna wiertnicza Meec Tools
- maszyna wiertnicza Güde
- maszyna wiertnicza Zipper
- maszyna wiertnicza McKenzie
- maszyna wiertnicza Ferm
- maszyna wiertnicza Hitachi
- maszyna wiertnicza Craftsman
- maszyna wiertnicza Ridgid
- maszyna wiertnicza HiKOKI
- maszyna wiertnicza Metabo
- maszyna wiertnicza C-Power
- maszyna wiertnicza Skil
- maszyna wiertnicza Pansam
- maszyna wiertnicza Luxor
- maszyna wiertnicza Kress
Najnowsze instrukcje dla maszyna wiertnicza
6 Października 2024
28 Września 2024
28 Września 2024
24 Września 2024
17 Września 2024
17 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024