Instrukcja obsługi Black & Decker GK430

Black & Decker Maszyna do piłowania GK430

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker GK430 (37 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/37

English

Italiano

Deutsch

Français

Nederlands

Español

Português

EÏÏËÓÈÎ¿

Chainsaw

Know your machine

Read all of this manual carefully, observing all the

recommended safety instructions before, during and

after using your machine, and maintain your machine

in good working order.

Familiarise yourself with the controls on your machine

before attempting to operate it, but above all, be sure

you know how to stop your machine in an emergency.

Retain this manual and all other literature supplied

with your machine for future reference.

Safety instructions

•Know your chainsaw. Please read the

instruction leaflet carefully and familiarize yourself

with the chainsaw; in particular with regard to the

sawing of round wood.

•Wear close fitting and protective clothing -

including a safety helmet, goggles, safety shoes

and gloves. We recommend rubber gloves and

rubber footwear for outdoor use.

•For all types of cutting. Always hold the saw

firmly with both hands, with thumbs and fingers

encircling the saw handles. Do not release your

finger until the chainsaw has stopped moving.

•Fatigue. Never operate a chainsaw when you

are tired.

•Avoid dangerous environments. Do not

expose your chainsaw to damp and wet

conditions. Keep the work area well lit. Use a

saw horse whenever possible.

•Keep children away. Make sure that other

people - especially children and pets- stay away

from the work area.

•Be sure of your footing and pre-plan a safe exit

from a falling tree or branches.

•Use wedges to help control felling and prevent

binding the guide bar and saw chain in the cut.

•Keep all parts of your body and clothing

away from the saw chain when running the

chainsaw. Before you switch on make sure the

chainsaw is not contacting anything. Do not

touch or try to stop a moving saw chain with

your hand. Be specially careful when using in a

kneeling position.

•Carry your chainsaw carefully with the mains

supply disconnected and with the guide bar and

saw chain to the rear.

•Do not abuse the cable. Never carry a

chainsaw by the cable or jerk it to disconnect the

plug from the socket. Keep the cable away from

heat, oil or sharp edges. Check the cable

frequently for damage.

•Do not operate a chainsaw which is damaged,

improperly adjusted or is not completely and

securely assembled.

•Keep your chainsaw clean. Do not allow dirt,

oil or sawdust to build up on the chainsaw; pay

particular attention to the air inlet and outlet slots.

These must not become clogged. Clean your

chainsaw with a dry cloth, but do not use any

solvents or cleaning fluids.

•Saw chain care. Keep the saw chain sharp and

snug on the guide bar. Ensure the saw chain and

guide bar are clean and well oiled.

•Beware of kickback. Hold the chainsaw firmly

with both hands when the motor is running. Use

a firm grip with thumbs and fingers encircling the

chainsaw handles and watch carefully what you

cut. Kickback (that is when the chainsaw jumps

or jerks up or backward) can be caused by:

•Striking branches or other objects

accidentally with a tip of the saw while the

saw chain is moving.

•Striking metal, cement or any other hard

material near the wood, or buried in

the wood.

•A dull or loose chain.

•Cutting above shoulder height.

•Inattention in holding or guiding the saw

while cutting.

•Overbalancing. Keep proper footing and

balance at all times. Do not overreach.

•We strongly recommend you do not attempt to

operate the chainsaw while in a tree, on a ladder

or on any other unstable surface. If you decide to

do so, be advised that these positions are

extremely dangerous.

•When cutting a branch that is under tension, be

alert for springback so that you will not be struck

when the tension is released.

•Use extreme caution when cutting small size

brush and saplings because slender material

may catch the saw chain and be whipped

toward you, or pull you off balance.

•Switch off before setting the chainsaw down.

The saw chain will continue to run for a short

period after the saw has been switched off.

Instruction Manual

ENGLISH

•Secure your work using clamps or chocks. Be

sure that you use both hands when operating

your chainsaw.

•Remove the plug from the mains before

changing the work location, adjusting or

cleaning, or if the cord becomes entangled

or damaged.

•Your chainsaw when not is use. Do not store

your chainsaw for any length of time without first

removing the saw chain and guide bar which

should be kept immersed in oil. Store all parts of

your chainsaw in a dry, secure place out of reach

of children. We recommend you drain the oil

reservoir prior to storage.

•Do not saw wet wood or use the chainsaw

when it is raining. We recommend you use the

chainsaw in combination with a residual current

device; specification: delta = 30mAI1.

•Do not use the chainsaw above shoulder height.

•Ensure someone is nearby (but at a safe

distance) in case of an accident.

•Do not try to insert into a previous cut, as this

could cause kickback. Always make a fresh cut

every time.

•When carrying the chainsaw, please use the

protection sleeve for the bar.

•Only use extension cable type HO7RN-F

2 x 1mm2.

•If for any reason you have to touch the chain,

make sure the chainsaw is disconnected from

the mains.

Warning symbols on the chainsaw

(Fig. A)

A1. Read all of this manual carefully.

2. Do not use your chainsaw in wet

conditions.

3. Always remove the plug from the socket

before inspecting a damaged cable. Be

careful not to use the chainsaw if the

cable is damaged.

4. Before you press the lock-off switch

check that the chain brake reset button

is properly engaged.

Double insulation

Your machine is double insulated. This means that

all external metal parts are electrically isolated from

the power supply. This is achieved by placing an

extra insulation barrier between the electrical and

mechanical parts. Double insulation means greater

electrical safety and obviates the necessity of having

the machine earthed.

Black & Decker policy is one of continuous improvement

to their products and as such they reserve the right

to change product specification without prior notice.

Electrical safety

Your machine should always be switched off at the

mains before disconnecting any plug and socket

connector or extension cables. Make sure your

machine is correct for your supply. The for voltage this

machine is on the rating plate. We strongly

recommend the use of PVC or rubber covered plugs

or connectors with your chainsaw. The recommended

fuse for use with your machine is 13 amps.

Note: Fuses do not give protection against

electric shock.

New cable connection system

(UK only)

Black & Decker continually make every effort to

achieve the highest standards in performance, quality

and reliability and recommend the use of the new

outdoor cable connection system.

The new system gives additional protection against

the possibility of water or moisture entering into the

cable connector during normal use.

Note: The new connection system does not release

the operator of the machine from the safety

precautions/warnings and safe working practices given

in this instruction leaflet. Particular attention is drawn

to the coupler system as being “weather resistant”

and not suitable for immersion, submersion or being

subjected to water jets. Care should be taken to

prevent the cable from lying or trailing through pools

of water or from splashing with hose pipes.

The new cable system is available in various lengths

through most major DIY retail outlets:

A6611 15m heavy duty cable, new socket,

13 amp plug and cable tidy system

A6612 25m heavy duty cable, new socket,

13 amp plug and cable tidy system

A6613 40m heavy duty cable, new socket,

13 amp plug and cable tidy system

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Maszyna do piłowania
Model:	GK430

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker GK430, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Black & Decker KS550K Instrukcja

8 Października 2024

Black & Decker CS1004 Instrukcja

8 Października 2024

Black & Decker KS701PE Instrukcja

8 Października 2024

Black & Decker VP650 Instrukcja

7 Października 2024

Black & Decker KS2005EK Instrukcja

29 Września 2024

Black & Decker WM125 Instrukcja

27 Września 2024

Black & Decker BES702 Instrukcja

25 Września 2024

Black & Decker BECS2245 Instrukcja

22 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025

Güde GSS 400 Instrukcja

12 Stycznia 2025

Makita DUC306PG2 Instrukcja

12 Stycznia 2025

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025

DEDRA DED7060 Instrukcja

11 Stycznia 2025

Einhell KGS 190 Instrukcja

11 Stycznia 2025

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025

Maruyama MCV51 Instrukcja

11 Stycznia 2025

Vonroc JS505DC Instrukcja

9 Stycznia 2025