Instrukcja obsługi Black & Decker BDM200L

Black & Decker Sprzęt pomiarowy BDM200L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BDM200L (43 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/43
1
www.blackanddecker.com
English 3
Deutsch 6
Français 10
Italiano 13
Nederlands 16
Español 19
Português 22
Svenska 25
Norsk 28
Dansk 31
Suomi 34
∂ÏÏËÓÈο 37
4
5 1
2
6
3
7
2
8
2
44
6
C
B
D
A
E
3
ENGLISH
Intended use
This Black & Decker tool has been designed to measure
distances in DIY applications. This tool is intended for
consumer use only.
Safety instructions
◆Warning! When using battery-powered tools, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire, leaking batteries,
personal injury and material damage.
◆Read all of this manual carefully before operating the tool.
◆Retain this manual for future reference.
Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the
tool where there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
work area or to touch the tool.
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
Use appropriate tool
The intended use is described in this instruction manual.
Warning! The use of any accessory or attachment or
performance of any operation with this tool other than those
recommended in this instruction manual may present a risk of
personal injury.
Check for damaged parts
Before use, carefully check the tool for damage. Ensure that
the tool will operate properly and perform its intended
function. Do not use the tool if any part is damaged or defective.
Store idle tools
When not in use, tools and batteries should be stored in a dry,
locked up or high place, out of reach of children.
Repairs
This tool complies with relevant safety requirements. Repairs
should only be carried out by qualified persons using original
spare parts; otherwise this may result in considerable danger
to the user.
Additional safety instructions for non-rechargeable
batteries
◆Never attempt to open for any reason.
◆Do not store in locations where the temperature may
exceed 40 °C.
◆When disposing of batteries, follow the instructions given
in the section “Protecting the environment”. Do not
incinerate the batteries.
◆Under extreme conditions, battery leakage may occur.
When you notice liquid on the batteries, proceed as
follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
Additional safety instructions for lasers
Read all of this manual carefully.
This product is not to be used by children under 16.
Warning! Laser radiation.
Do not look into the laser beam.
Do not view the laser beam directly with optical
instruments.
Refer to the laser product characteristics.
◆This laser complies with class 2 according to
IEC 60825-1+A1+A2: 2001. Do not replace a laser diode
with a different type. If damaged, have the laser repaired
by an authorised repair agent.
◆Do not use the laser for any purpose other than projecting
laser lines.
◆An exposure of the eye to the beam of a class 2 laser is
considered safe for a maximum of 0.25 seconds.
Eyelid reflexes will normally provide adequate protection.
At distances over 1 m, the laser complies with class 1 and
thus is considered completely safe.
◆Never look into the laser beam directly and intentionally.
◆Do not use optical tools to view the laser beam.
◆Do not set up the tool at a position where the laser beam
can cross any person at head height.
◆Do not let children come near the laser.
Features
1. On/off switch (laser)
2. Laser head
3. Tape hook

Specyfikacje produktu

Marka: Black & Decker
Kategoria: Sprzęt pomiarowy
Model: BDM200L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker BDM200L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Black & Decker

Black & Decker

Black & Decker BDM200L Instrukcja

28 Sierpnia 2024
Black & Decker

Black & Decker ATM100 Instrukcja

14 Sierpnia 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL810 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL710 Instrukcja

14 Stycznia 2025
Ebro

Ebro PHT 830 Instrukcja

13 Stycznia 2025
Kern

Kern FL 1KG Instrukcja

10 Stycznia 2025
PeakTech

PeakTech 6193 Instrukcja

10 Stycznia 2025
PCE Instruments

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025