Instrukcja obsługi Black & Decker BDCGG12


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BDCGG12 (44 stron) w kategorii Pistolet do klejenia. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
www.blackanddecker.eu
1
8
2
3 4
5
6
7
BDCGG12
2
5
1
D
B
E
A10
7
6
3 4
11
C
109
12
4
ENGLISH (Original instructions)
u Do not use the appliance if any part is
damaged or defective.
u Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
u Never attempt to remove or replace
any parts other than those specied in
this manual.
After Use
u Switch off and remove the battery be-
fore leaving the appliance unattended
and before changing, cleaning or
inspecting any parts of the appliance.
u When not in use, the appliance should
be stored in a dry, well ventilated place
out of the reach of children.
u Children should not have access to
stored appliances.
Service
u Have your appliance serviced by a
qualied repair person using only
identical replacement parts. This will
ensure that the safety of the appliance
is maintained.
Additional Safety instructions
for heat guns
The intended use is described in this
manual. The use of any accessory or
attachment or performance of any opera-
tion with this appliance other than those
recommended in this instruction manual
can present a risk of personal injury and/
or damage to property.
u A re may result if the appliance is not
used with care, therefore:
u be careful when using the appliance
in places where there are
combustible materials;.
u do not apply to the same place for a
long time;
u do not use in presence of an
explosive atmosphere;
u be aware that heat may be
conducted to combustible materials
that are out of sight;
u allow the appliance to cool down
before storage;
u do not leave the appliance
unattended when it is switched on.
u Do not touch the heated nozzle of
the Glue Gun. The operating tempera-
ture of this appliance is approximately
199 °C.
u Keep hands away from the heated
attachment and work area. Heat may
be conducted through the work piece.
Use clamps or pliers to hold the work
piece.
u The heating element will begin to
heat up as soon as the appliance is
switched on. To avoid injury or dam-
age to property always assume that
the appliance is hot.
u Protect the work surface and mate-
rials from heat damage. Heat may
be conducted through the work piece.
Use a heat resistant material to protect
the work surface.
u Glue sticks are not intended for
ingestion and should not come in
contact with food, etc.
If swallowed, seek medical attention.
Keep out of the reach of children.


Specyfikacje produktu

Marka: Black & Decker
Kategoria: Pistolet do klejenia
Model: BDCGG12
Kolor produktu: Czarny
Pojemność zbiornika na wodę: 0.7 l
Schowany element grzewczy: Tak
Moc: 600 W
Automatyczne wyłączanie zasilania: Tak
Częstotliwość wejściowa AC: 50 Hz
Napięcie wejściowe AC: 230 V
Zabezpieczenie przed przegrzaniem: Tak
Filtrowanie: Tak
Lampka kontrolna: Tak
Wskaźnik poziomu wody: Tak
Podświetlony włącznik/wyłącznik: Tak
Możliwość napełniania przez dziobek: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker BDCGG12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Pistolet do klejenia Black & Decker

Instrukcje Pistolet do klejenia

Najnowsze instrukcje dla Pistolet do klejenia

MSW

MSW -AAH-01 Instrukcja

10 Stycznia 2025
Metabo

Metabo KE 3000 Instrukcja

30 Grudnia 2025
Milwaukee

Milwaukee M12 GG Instrukcja

26 Grudnia 2024
Rapid

Rapid EG212 Instrukcja

10 Października 2024
Einhell

Einhell BT-GG 30 K Instrukcja

9 Października 2024
Einhell

Einhell BT-GG 200 Instrukcja

7 Października 2024
DURO PRO

DURO PRO D-AK 3,6/1 Li Instrukcja

5 Października 2024
Rapid

Rapid PRO EG340 Instrukcja

4 Października 2024
Rapid

Rapid EG130 Instrukcja

4 Października 2024