Instrukcja obsługi Black & Decker BDCDD18N

Black & Decker maszyna wiertnicza BDCDD18N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BDCDD18N (108 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/108

www.blackanddecker.eu

BDCDD18

B C

ENGLISH

(Original instructions)

Intended use

Your BLACK+DECKER BDCDD18 - Drill, Screwdriver

has been designed for screwdriving applications and for

drilling in wood, metal and plastics. This tool is intended

for consumer use only.

Safety instructions

General power tool safety warnings

@Warning! Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions listed below may result in

electric shock, re and/or serious injury.

Save all warnings and instructions for future refer-

ence. The term "power tool" in all of the warnings listed

below refers to your mains operated (corded) power tool

or battery operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

ammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can cause you

to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

b. Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch

on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

e. Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	maszyna wiertnicza
Model:	BDCDD18N
Kolor produktu:	Black, Orange
Źródło zasilania:	Bateria
Waga produktu:	- g
Poziom ciśnienia akustycznego:	64.5 dB
Technologia baterii:	Litowo-jonowa (Li-Ion)
Konstrukcja produktu:	Wiertarka pistoletowa
Regulowana prędkość:	Tak
Wyjmowana bateria:	Tak
Napięcie baterii:	18 V
Średnica wiertła w betonie (max):	- mm
Rodzaj zacisku:	Zamek centralny
Średnica wiertła w metalu (max):	10 mm
Średnica wiertła w drewnie (max):	25 mm
Prędkość biegu jałowego (max):	- RPM
Poziom mocy dźwięku:	75.5 dB
Miękki uchwyt:	Tak
Bieg wsteczny:	Tak
Wbudowane światło:	Nie
Wiercenie:	Tak
Wkręcanie:	Tak
Wiercenie udarowe:	Nie
Maksymalna szerokość szczęk:	10 mm
Dołączony akumulator:	Nie
Maksymalny moment obrotowy:	28 N·m
Regulowany moment obrotowy:	Tak
Prędkość znamionowa (1-szy bieg):	650 RPM
Liczba ustawianych zacisków:	11