Instrukcja obsługi Black & Decker 11683
Black & Decker
Schuurmachine
11683
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker 11683 (16 stron) w kategorii Schuurmachine. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Form No. 589307-01 APR. ‘05 Printed in China
CAUTION:
Before using this product,
read this manual and follow
all its Safety Rules and
Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
www.sears.com/craftsman
• Safety
• Operation
• Maintenance
• Parts List
• Español Pág. 9
MOUSE SANDER / POLISHER
Instruction Manual
Model 900.11683
589307-01,11683 Sears 4/25/05 2:36 PM Page 1
ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL
If this Craftsman tool fails to give complete satisfaction within one year from date of
purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES,
and Sears will replace it, free of charge.
If this Craftsman tool is used for commercial or rental purposes, this warranty applies
for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
WARNING: Read and understand all
instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious personal
injury.
SAVE THESE
INSTRUCTIONS
WORK AREA
•Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
•Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases,
or dust. Power tools create sparks which
may ignite the dust or fumes.
•Keep bystanders, children, and
visitors away while operating a power
tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
•Double insulated tools are equipped
with a polarized plug (one blade is
wider than the other.) This plug will fit
in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
a polarized outlet. Do not change the
plug in any way. Double insulation
eliminates the need for the three
wire grounded power cord and grounded
power supply system.
•Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
•Don’t expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
•Do not abuse the cord. Never use the
cord to carry the tools or pull the plug
from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
Damaged cords increase the risk of
electric shock.
•When operating a power tool outside,
use an outdoor extension cord marked
"W-A" or "W." These cords are rated for
outdoor use and reduce the risk of
electric shock.
PERSONAL SAFETY
•Stay alert, watch what you are doing
and use common sense when
operating a power tool. Do not use tool
while tired or under the influence of
drugs, alcohol, or medication. A
moment of inattention while operating
power tools may result in serious personal
injury.
•Dress properly. Do not wear loose
clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves
away from moving parts. Loose
clothing, jewelry, or long hair can be
caught in moving parts. Air vents cover
moving parts and should be avoided.
•Avoid accidental starting. Be sure
switch is off before plugging in.
Carrying tools with your finger on the
switch or plugging in tools that have the
switch on invites accidents.
•Remove adjusting keys or wrenches
before turning the tool on. A wrench or
key that is left attached to a rotating part
of the tool may result in personal injury.
•Do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enables better control of the
tool in unexpected situations.
•Use safety equipment. Always wear
eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing
2
GENERAL SAFETY RULES
SEARS WARRANTY
589307-01,11683 Sears 4/25/05 2:36 PM Page 2
3
protection must be used for appropriate
conditions.
TOOL USE AND CARE
•Use clamps or other practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against your body is unstable
and may lead to loss of control.
•Do not force tool. Use the correct tool
for your application. The correct tool
will do the job better and safer at the rate
for which it is designed.
•Do not use tool if switch does not turn
it on or off. Any tool that cannot be
controlled with the switch is dangerous
and must be repaired.
•Disconnect the plug from the power
source before making any
adjustments, changing accessories,
or storing the tool. Such preventative
safety measures reduce the risk of
starting the tool accidentally.
•Store idle tools out of reach of
children and other untrained persons.
Tools are dangerous in the hands of
untrained users.
•Maintain tools with care. Keep cutting
tools sharp and clean. Properly
maintained tools, with sharp cutting
edges are less likely to bind and are
easier to control.
•Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tools operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
•Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool, may become
hazardous when used on another tool.
SERVICE
•Tool service must be performed only
by qualified repair personnel. Service
or maintenance performed by unqualified
personnel could result in a risk of injury.
•When servicing a tool, use only
identical replacement parts. Follow
instructions in the Maintenance
section of this manual. Use of
unauthorized parts or failure to follow
Maintenance Instructions may create a
risk of electric shock or injury.
• The label on your tool may include the
following symbols.
V..............volts
A..............amperes
Hz............hertz
W ............watts
min ..........minutes
............alternating current
........direct current
no ............no load speed
............Class II Construction
…/min......revolutions or reciprocation
................per minute
............earthing terminal
............safety alert symbol
• ALWAYS WEAR EYE PROTECTION.
• Clean your tool out periodically.
CAUTION: Wear appropriate hearing
protection during use. Under some
conditions and duration of use, noise from
this product may contribute to hearing loss.
•Hold tool by insulated gripping
surfaces when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and
shock the operator.
WARNING: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction
activities contains chemicals known to
cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber. (CCA)
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals:work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are
specially designed to filter out microscopic
particles.
•Avoid prolonged contact with dust
from power sanding, sawing, grinding,
drilling, and other construction
activities. Wear protective clothing
and wash exposed areas with soap
and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING: Use of this tool can
generate and/or disburse dust, which
SAFETY WARNINGS AND
INSTRUCTIONS: SANDERS
589307-01,11683 Sears 4/25/05 2:36 PM Page 3
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | Schuurmachine |
| Model: | 11683 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker 11683, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Schuurmachine Black & Decker
5 Października 2024
12 Września 2024
8 Września 2024
5 Września 2024
3 Września 2024
3 Września 2024
1 Września 2024
1 Września 2024
30 Sierpnia 2024
29 Sierpnia 2024
Instrukcje Schuurmachine
- Schuurmachine AEG
- Schuurmachine Worx
- Schuurmachine Milwaukee
- Schuurmachine Bosch
- Schuurmachine Parkside
- Schuurmachine Toolcraft
- Schuurmachine Festool
- Schuurmachine Bavaria By Einhell
- Schuurmachine Stanley
- Schuurmachine Scheppach
- Schuurmachine Proxxon
- Schuurmachine RIKON
- Schuurmachine DeWalt
- Schuurmachine Einhell
- Schuurmachine Hyundai
- Schuurmachine Silverline
- Schuurmachine Makita
- Schuurmachine Ozito
- Schuurmachine RYOBI
- Schuurmachine Flex
- Schuurmachine Biltema
- Schuurmachine Hilti
- Schuurmachine Trotec
- Schuurmachine Handwerk
- Schuurmachine Güde
- Schuurmachine Bavaria
- Schuurmachine DURO PRO
- Schuurmachine Fein
- Schuurmachine Ferm
- Schuurmachine Hitachi
- Schuurmachine Craftsman
- Schuurmachine Ridgid
- Schuurmachine PowerPlus
- Schuurmachine Vonroc
- Schuurmachine HiKOKI
- Schuurmachine Porter-Cable
- Schuurmachine Metabo
- Schuurmachine Skil
- Schuurmachine Far Tools
- Schuurmachine Tryton
- Schuurmachine Bort
- Schuurmachine Gamma
- Schuurmachine Max
- Schuurmachine Rupes
- Schuurmachine Stomer
- Schuurmachine Elu
- Schuurmachine King Craft
- Schuurmachine Toledo
- Schuurmachine FIXIT
- Schuurmachine Einhell Bavaria
- Schuurmachine Pevec
- Schuurmachine TAURUS Titanium
Najnowsze instrukcje dla Schuurmachine
7 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024
4 Października 2024