Instrukcja obsługi Bionaire BFH261-I


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bionaire BFH261-I (14 stron) w kategorii Podgrzewacz. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
9100020008685
BFH261I07MLM1
Belgium +32 38 70 86 86
Czech Republic +420 48 513 03 03
Denmark +45 45 93 43 73
Finland +358 98 70 870
Hungary +36 72 482 017
Netherlands +31 079-3637310
Norway +47 51 66 99 00
Poland +48 22 847 8968
Spain +34 91 64 27 020
Sweden +46 31 29 09 80
Distributed by
Holmes Products (Europe) Ltd.
1 Francis Grove
London SW19 4DT
England
Fax: +44 (0)20 8947 8272
Email: enquiriesEurope@jardencs.com
Website address: www.bionaire.com
UK - Free phone Customer Service Helpline 0800 052 3615
Holmes Products France
1015, Rue du Maréchal Juin
Z.I Vaux - Le - Pénil
77000 Melun France
Phone: +33 1 64 10 45 80
Fax: +33 1 64 10 02 32
FRANCE - SERVICE CONSOMMATEURS
0 825 85 85 82
FAN HEATER
BFH261
INSTRUCTION MANUAL
NOTICE D’UTILISATION
BETRIEBSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
MANUALE D'USO
INSTRUCTIEHANDLEIDING
BRUKERHÅNDBOK
YTTÖOPAS
BRUKSANVISNING
BRUGERVEJLEDNING
INSTRUKCJA

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
HASZNÁLATI UTASÍTÁS
VOD K OBSLUZE
© 2007 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All Rights Reserved.
English 2
Deutsch/German 4
Français/French 6
Español/Spanish 9
Svenska/Swedish 11
Nederlands/Dutch 13
Suomi/Finnish 15
Norsk/Norwegian 17
Polski/Polish 19
"esky/Czech 22
Magyar/Hungarian 24
BFH261I07MLM1.qxd 9/6/07 17:37 Page 1
By ddupasquier at 3:51 pm, 9/14/07
READ AND RETAIN THE FOLLOWING
FOR FUTURE REFERENCE.
GENERAL DESCRIPTION (FIG.1 & 4)
A. POWER LIGHT
B. SET TEMPERATURE LIGHTS
C. LOW POWER
D. HIGH POWER
E. MODE/OFF CONTROL
F. SWIVEL BASE
IMPORTANT SAFEGUARDS
Mains connection
Read these instructions carefully, in conjunction
with the illustrations, before using the heater.
Before connecting the heater, check that the
voltage indicated on the rating plate corresponds
to the mains voltage in your home / office.
Avoid the use of an extension cord because it
may cause the heater to overheat.
WARNING: Risk of Fire. Discontinue use if
the outlet or plug become hot to the touch.
Overheating may indicate a worn or damaged
outlet. Consult a qualified electrician for outlet
replacement.
Safe positioning
Only touch the heater with dry hands.
DO NOT position where it can be touched by
children, especially the very young.
When using the heater, DO NOT place in the
immediate surroundings of a shower or
swimming pool.
DO NOT use this heater outdoors.
DO NOT position the heater directly under a
power socket.
Position the heater in such a manner that the
air flow toward the heater and away from it, is
not obstructed.
The heater must NOT be covered. ( )
Allow a safe area around the heater. DO NOT
block the air inlet or outlet. Keep objects at
least 50 cm from the top and sides and 200
cm at the front.
Do not use this heater when it is lying on its side.
If the heater is tipped over, unplug it and
allow it to cool before standing it back up.
DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using
inflammable glue or solvent (e.g. when gluing
or varnishing parquet floors, PVC etc.).
CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal
cutout, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
BATHROOM USE
If this heater is going to be used in a
bathroom, or similar room, it must be
installed:
a. In such a way that the switches and other
controls cannot be touched by the person
in the bath or shower.
b. Outside the grey shaded areas (Fig.2 & 3).
If you are unsure about the installation of this
heater in the bathroom we recommend that
you seek advice from a professional
electrician/installer.
Safety in use
Extra caution is necessary when the heater is
used near children or when it is left unattended.
DO NOT insert any objects into the heater.
Keep the mains cord at a safe distance from
the main body of the heater.
Prevent overheating of the heater by keeping
the air inlet and outlet unblocked. DO NOT
hang anything in front of or above the heater.
If overheating should occur, the built-in
overheating safety device will switch off the
heater.
DO NOT use aerosols, inflammable substances
or materials sensitive to heat in the flow of hot air.
Do not place the cord under a rug.
Servicing
Should the heater stop working, first check the
fuse in the plug (UK only) or fuse/circuit breaker
at the distribution board is operating, before
contacting the manufacturer or service agent.
If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid hazard.
The heater contains no user serviceable
parts and should the product suffer damage or
breakdown it must be returned to the
manufacturer or their service agent.
OPERATING INSTRUCTIONS
Your heater is equipped with a technologically
advanced electronic thermostat.You can set the
ENGLISH
2
F
A
Fig.2 Fig.3
ADDITIONAL FEATURES:
1. Press & hold at any time to turn the heater off. Heater will save the
last setting in memory.
2. Press to turn heater on and heater will recall the last setting in memory.
3. Select the desired thermostat setting. The heater will cycle ON and OFF
as it maintains the preset temperature.
PRESS TEMPERATURE
1 II HIGH (2 kW)
2 I LOW (1 kW)
3 - 7 II
HIGH (2 kW)
16
°
C, 18
°
C, 20
°
C,
22
°
C, 24
°
C
8 - 12 I
LOW (1 kW)
16
°
C, 18
°
C, 20
°
C,
22
°
C, 24
°
C
13 O/Off O/Off
Fig.4
Fig.1
BFH261
B
C
D
E
NOTE: Not suitable for bathroom use in the UK.
BFH261I07MLM1.qxd 9/6/07 17:37 Page 4
take it back to the place of purchase, with
your till receipt and a copy of this guarantee.
The rights and benefits under this guarantee
are additional to your statutory rights which
are not affected by this guarantee.
Holmes Products (Europe) Ltd. undertakes
within the specific period, to repair or replace
free of charge, any part of the appliance found
to be defective provided that:
We are promptly informed of the defect.
The appliance has not been altered in any
way or subjected to misuse or repair by a
person other than a person authorised by
Holmes Products (Europe) Ltd..
No rights are given under this guarantee to a
person acquiring the appliance second hand
or for commercial or communal uses.
Any repaired or replaced appliance will be
guaranteed on these terms for the remaining
portion of the guarantee.
THIS PRODUCT IS MANUFACTURED TO
COMPLY WITH THE E.E.C. DIRECTIVES
2006/95/EC, 2004/108/EC AND 2006/42/EC.
Waste electrical products should
not be disposed of with
Household waste.
Please recycle where facilities
exist.
Check on the following website for
further recycling and WEEE
information:
www.bionaire.com or e-mail
enquiriesEurope@jardencs.com
LESEN SIE DIE FOLGENDEN
ANWEISUNGEN AUFMERKSAM DURCH,
UND BEWAHREN SIE SIE ZU
NACHSCHLAGEZWECKEN AUF.
ALLGEMEINE BESCHREIBUNG
(SIEHE ABB.1 & 4)
A. BETRIEBSKONTROLLLEUCHTE
B. TEMPERATURLEUCHTEN
C. NIEDRIGE HEIZSTUFE
D. HOHE HEIZSTUFE
E. MODUS-/AUSSCHALTTASTE
F. DREHBARER STANDFUSS
WICHTIGE SICHERHEITSHINWEISE
Netzanschluss
Lesen Sie diese Anweisungen vor
Inbetriebnahme des Heizlüfters sorgfältig
durch, und sehen Sie sich die entsprechenden
Abbildungen an.
Stellen Sie vor dem Anschluss des Heizlüfters
sicher, dass die auf dem Leistungsschild
angegebene Spannung mit der Netzspannung
in Ihrem Haus oder Büro übereinstimmt.
Verwenden Sie kein Verlängerungskabel, um
einer Überhitzung des Geräts vorzubeugen.
WARNHINWEIS: Brandgefahr. Stellen Sie
den Betrieb sofort ein und ziehen Sie den
Netzstecker, wenn Sie feststellen, dass Stecker
oder Steckdose heiß werden. Überhitzung
kann auf eine beschädigte Steckdose
hinweisen. Lassen Sie die Steckdose von
einem geprüften Elektriker austauschen.
Sichere Aufstellung
Fassen Sie das Gerät nur mit trockenen
Händen an.
Stellen Sie das Gerät für Kinder
UNZUGÄNGLICH auf, besonders
bei Kleinkindern.
Stellen Sie das Gerät bei Gebrauch NICHT
in unmittelbarer Nähe einer Dusche oder
eines Schwimmbades auf.
Verwenden Sie dieses Gerät NICHT im Freien.
Stellen Sie das Gerät NICHT direkt unter
einer Steckdose auf.
Stellen Sie das Gerät so auf, dass der Luftstrom
vom bzw. zum Gerät nicht blockiert wird.
Das Gerät darf NICHT abgedeckt werden. ( )
Halten Sie zwischen dem Gerät und anderen
Gegenständen einen Sicherheitsabstand
ein. Die Luftein- und -austrittsöffnungen
dürfen NICHT verdeckt werden. Der
Sicherheitsabstand zwischen dem Gerät
und anderen Gegenständen sollte nach oben
und zu den Seiten mindestens 50 cm und
nach vorne mindestens 200 cm betragen.
Nehmen Sie das Gerät nicht in Betrieb,
wenn es auf der Seite liegt.
Wenn das Gerät umgekippt ist, ziehen Sie
den Netzstecker, und lassen Sie das Gerät
abkühlen, bevor Sie es wieder aufrichten.
Setzen Sie das Gerät NICHT in Räumen
mit explosiven Gasen (z. B. Benzin) oder
während der Arbeit mit entflammbaren
Klebstoffen oder Lösungsmitteln ein
(z. B. beim Verkleben oder Lackieren
von Parkett, PVC usw.).
VORSICHT: Um Risiken im Zusammenhang
mit einem unbeabsichtigten Zurücksetzen des
Schutztemperaturbegrenzers zu vermeiden,
darf das Gerät nicht über ein externes
elektrisches Schaltgerät wie eine
Zeitschaltuhr mit Strom versorgt werden
oder an einen Stromkreis angeschlossen
sein, der durch den Versorgungsbetrieb
regelmäßig an- und abgeschaltet wird.
Personen (einschließlich Kinder), die aufgrund
4
heater to run continuously in manual mode or set
the thermostat to your desired temperature setting.
The thermostat will automatically turn the heater
ON or OFF depending on the preset comfort level.
The comfort level ranges between 16ºC and 24ºC.
MANUAL MODE INSTRUCTIONS
1. Plug the heater into the wall socket.
2. To start the unit, push the MODE/OFF (E)
button once for the HIGH (2000 Watts)
manual setting.
3. Press the button again for the LOW (1000
Watts) manual setting.
4. To stop the unit, press and hold the
MODE/OFF button for two seconds or keep
pressing the button until all the temperature
indicators are OFF.
NOTE: The Power Light (A) will remain lit
during operation. In Manual Mode, only the
LOW (C) or HIGH (D) power light will be lit.
THERMOSTAT INSTRUCTIONS
To take advantage of the thermostat continue to
press the MODE/OFF button until the desired
temperature is set in either the HIGH or LOW
setting. When ambient temperature rises above
the set temperature, the heater will stop. When
the ambient temperature drops below the set
temperature, the heater will turn on
automatically.
NOTE: When the thermostat is set, either the
HIGH (D) or LOW (C) power light, and the Set
Temperature Light (B) will remain lit during
operation.
NOTE: It is normal for the heater to cycle ON
and OFF as it maintains the preset temperature.
To prevent the unit from cycling, you need to
raise the thermostat setting.
NOTE: The thermostat will remember the
previous temperature setting after the unit has
been turned off. However, if the unit is unplugged,
the thermostat will be reset and will no longer
remember the previous temperature setting.
AUTO SAFETY SHUT OFF
The heater has a built-in safety device which will
switch off the heater automatically in case of
accidental overheating. It can only resume operation
when the user has reset the unit.
To reset the heater
1 Press the MODE/OFF button for two seconds
or keep pressing the button until all the
temperature indicators are OFF.
2 Unplug the heater and wait for 30 minutes for
the unit to cool down.
3 After the 30 minutes, plug the unit in again
and operate normally.
For U.K. and Ireland only:
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type. Please refer to
"Installation of a plug" below.
Installation of a plug Applicable to U.K.
and Ireland
This product is fitted with a 13A plug complying to
BS1363. If this plug is unsuitable or needs to be
replaced, please note the following:
The wires in the mains lead are coloured as such:
BROWN - LIVE
BLUE - NEUTRAL
Please note that the colour of these mains wires
may not correspond with the colour markings
that identify the terminals in your plug. Please
proceed as follows:
The BROWN coloured wire must be connected
to the terminal, which is marked with the letter
"L" or is coloured RED.
The BLUE coloured wire must be connected to
the terminal, which is marked with the letter "N"
or is coloured BLACK.
DO NOT CONNECT either of these wires to the
earth terminal in the plug. The earth terminal
plug is marked with the letter "E", or with the
earth symbol , or coloured GREEN, or
GREEN and YELLOW.
NOTE: If the terminals in the plug are not
marked or if you are unsure or in doubt about
the installation of the plug please contact a
qualified electrician. If a 13A 3-pin plug is fitted,
it must be an ASTA approved plug, conforming
to BS1363 standard. Replacement 13A fuses
must be BSI or ASTA BS1362 approved.
GUARANTEE
PLEASE KEEP YOUR RECEIPT AS THIS WILL
BE REQUIRED FOR ANY CLAIMS UNDER THIS
GUARANTEE.
This product is guaranteed for 2 years.
In the unlikely event of breakdown, please
3
DEUTSCH
BFH261I07MLM1.qxd 9/6/07 17:37 Page 7


Specyfikacje produktu

Marka: Bionaire
Kategoria: Podgrzewacz
Model: BFH261-I

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bionaire BFH261-I, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podgrzewacz Bionaire

Bionaire

Bionaire BFH251-I Instrukcja

8 Października 2024
Bionaire

Bionaire BFH261-I Instrukcja

8 Października 2024

Instrukcje Podgrzewacz

Najnowsze instrukcje dla Podgrzewacz

Jotul

Jotul F 361 Instrukcja

15 Października 2024
Adler

Adler AD 7752 Instrukcja

15 Października 2024
MSW

MSW -TTEH-3000 Instrukcja

15 Października 2024
MSW

MSW IR-DRYER2000.2 Instrukcja

15 Października 2024
MSW

MSW IR-DRYER3000.1 Instrukcja

15 Października 2024
MSW

MSW IR-DRYER2000.1 Instrukcja

15 Października 2024
MSW

MSW IR-DRYER3000.2 Instrukcja

15 Października 2024
MSW

MSW -CHEH-3300 Instrukcja

15 Października 2024
MSW

MSW -CTEH-15000 Instrukcja

15 Października 2024