Instrukcja obsługi Bestway Flowclear 58647

Bestway Przepych Flowclear 58647

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bestway Flowclear 58647 (16 stron) w kategorii Przepych. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
EN
FR
ES
PT
OWNER’S MANUAL
bestwaycorp.com/support
Visit the Bestway YouTube channel
Visit the Bestway YouTube channel
OWNER’S MANUAL
58390/58647 Filter Pump
WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
Fo Q, Manu , idr FA als V eos r O
Spare arts ease P , Pl Visit
bestwaycorp.com/support
V
i
s
i
t
w
w
w
.
b
e
s
t
w
a
y
c
o
r
p
.
c
o
m
/
s
u
p
p
o
r
t
f
o
r
h
e
l
p
READ AND FOLLOW ALL INSTRUCTIONS
Carefully read, understand, and follow all information in this user manual before installing and using the Filter Pump. These
warnings, instructions, and safety guidelines address some common risks of water filtration systems, but they cannot cover
all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity.
Retain this information for future use. In addition, the following information can be supplied depending on the Filter Pump type.
Keep the instructions in a safe place. If instruction is missing, search it on the website www.bestwaycorp.com/support.
WARNING
• Thermally protected motor csa enclosure 3.
• For use with swimming pools only.
To ensure continued protection against shock hazard, use only identical replacement parts when servicing.CAUTION:
WARNING: Risk of electric shock. connect only to a grounding type receptacle protected by a ground-fault circuit
interrupter (GFCI).
This pump is for use with storable pools only - do not use with permanently-installed pools.CAUTION:
Connect only to grounding type receptacle protected by a class a ground fault circuit interrupter.CAUTION:
For continued protection against possible electric shock this unit is to be mounted to the base in accordance CAUTION:
with the installation instructions.
TECHNICAL SAFETY INSTRUCTIONS
• Risk of electric shock, the pump cannot be using while people are inside the pool.
• To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
• To reduce the risk of electric shock the pool must be installed no closer than 6 feet (1.8 m) from any electrical outlet. Do not
place portable appliances closer than 5 feet (1.5 m) from the pool.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.
• To reduce the risk of electric shock, replace damaged cord immediately. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension cord to connect unit to electric supply; provide a properly located
outlet.
• This pump is for use with storable pools only. Do not use with permanently-installed pools. A storable pool is constructed
so that it is capable of being readily disassembled for storage and reassembled to its original integrity. A permanently-installed
pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage.
• For continued protection against possible electric shock this unit is to be mounted to the base in accordance with the
installation instructions.
• Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic failure of pump.
• When working with electricity, turn the electrical power off at the circuit breaker and lock breaker door. Failure to do so will
result in increased risk of shock, injury and possibly death.
• Do not remove the grounding prong or modify the plug in any way. Do not use adapter plugs. Consult a qualified electrician
for any questions related to the validity of your plug's grounding.
• Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug from the outlet by yanking
the power cord. Keep cord free from abrasions. Sharp objects, oil, moving parts, and heat should never be exposed to
the filter pump.
Atmospheric conditions may affect the performance and life span of your filter pump. Unnecessary wear and tear that may
occur during periods of cold, heat and exposure to sun. Whenever possible, shelter the pump from these conditions.
• Do not add chemicals in the filter pump.
Assembly and disassembly by adults only.
• Electric installations should follow national wiring rules, consult a qualified electrician with any questions.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
EN
2
3
MAINTENANCE
• Make sure that the Filter Pump is unplugged before any maintenance.
• For the maintenance instructions, refer to illustration steps inside the manual. Drawings are for illustration purposes
only. May not reflect actual product. Not to scale.
• To optimize the Filter Pump performance and for sanitary reasons, we suggest replacing the filter cartridge with a new
one every two weeks.
INSTALLATION
• For the installation instructions, refer to the illustration steps inside the manual. Drawings are for illustration purposes
only. May not reflect actual product. Not to scale.
• Bestway will not be responsible for any damage caused to the Filter Pump due to mishandling or failure to follow these
instructions.
• It is imperative to check that the hydraulic connectors are not obstructed.
• Do not dry run the Filter Pump. Make sure both the pool's inlet and outlet valves are fully covered by water before
operating the Filter Pump.
SETUP
CHECK LIST
To check the parts included in the box, consult the part list inside this manual. Verify that the equipment components
represent the model that you had intended to purchase. In case of any damaged or missing parts at the time of purchase,
visit our website bestwaycorp.com/support.
CHOOSE THE CORRECT LOCATION
Place the Filter Pump on a solid and level ground; it must be positioned on the same level as the base of the pool. If the
Filter Pump is in an upper or lower position than the base of the pool, the performance and life span of the Filter Pump can
be compromised. The pool and the Filter Pump have to be positioned in an area with adequate drainage and easy access
for maintenance operations. Never place the Filter Pump in a area that may accumulate water.
WARRANTY TERMS
For information concerning warranty terms, visit our website at: www.bestwaycorp.com.
STORAGE
• Remove all accessories; be sure that Filter Pump, hoses and debris screens are completely clean and dry before the
storage. If all the parts are not completely dry, mold may result.
• Before storage, remove and dispose of the filter cartridge.
• We strongly recommend disassembling the Filter Pump when the environment temperature is below 50ºF / 10ºC.
• Store the Filter Pump in a dry place with a moderate temperature between 50ºF / 10ºC and 100ºF / 38ºC.
ATTACHING A BASE
The filter pump must be vertically fixed on the ground or a base
made of wood or concrete before use. There should be two holes
9mm in diameter on the base, the space between which should
be 163mm. Put filter pump on the base and attach them together
by fastening the bolts and nuts. All the base parts should weigh
at least over 18kg to prevent the pump from accidentally falling.
390
163
40
390
250
163
2-M8 nut
2-M8 bolt


Specyfikacje produktu

Marka: Bestway
Kategoria: Przepych
Model: Flowclear 58647

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bestway Flowclear 58647, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Przepych Bestway

Instrukcje Przepych

Najnowsze instrukcje dla Przepych

Ozito

Ozito PTP-012A Instrukcja

15 Października 2024
MSW

MSW -AN-100 Instrukcja

15 Października 2024
MSW

MSW -MN34 Instrukcja

15 Października 2024
MSW

MSW -MN34M Instrukcja

15 Października 2024
MSW

MSW -AOP40S Instrukcja

15 Października 2024
Nefit

Nefit VentiLine Instrukcja

12 Października 2024
Liberty Pumps

Liberty Pumps 250 Instrukcja

9 Października 2024
Liberty Pumps

Liberty Pumps 457 Instrukcja

9 Października 2024
Liberty Pumps

Liberty Pumps 230 Instrukcja

9 Października 2024