Instrukcja obsługi Best Buy BE-MQ2515W25

Best Buy bank mocy BE-MQ2515W25

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Best Buy BE-MQ2515W25 (2 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Compatibility

• 2024 iPhone Series

• iPhone 15 Series

• iPhone 14 Series

• iPhone 13 Series

• iPhone 12 Series

• AirPods / AirPods Pro

• Qi-enabled devices and more

Features

• Keeps your devices powered with a 5,000mAh

capacity

• MagSafe-compatible design for wireless charging

• Snaps into place magnetically to ensure an

ecient charge

• Charge your iPhone with up to 7.5W (wireless)

• Charge your other Qi-enabled devices with up to

5W (wireless)

• Supports up to 15W of wired charging for your

USB-C devices

• Recharges using the included USB-C cable

• Provides comfortable viewing with a built-in

kickstand

• Backed by Best Buy

Note: For a better experience, we recommend a MagSafe or

MagSafe-compatible phone case.

Before using your new product, please read these instructions to prevent any damage.

Charging your power bank

1 Connect the USB-C cable (included) from your

power bank to your AC wall charger, then plug

the AC wall charger into a wall outlet.

The indicator LEDs light to indicate the current

charge level:

2 Unplug your power bank when it’s fully charged.

Using your power bank

Pull out the kickstand on the back of your power

bank (optional).

Wireless charging your device

Place your MagSafe-compatible or Qi-enabled

device on the center of the wireless charging pad

with the screen facing out.

Note: The wireless charging status LED indicates the

following statuses:

• On: Charging

• Blinking: Error or foreign object detected

• O: Standby/Not working

Wired charging your device

1 Plug one end of the included USB-C cable into

your power bank’s USB-C port.

2 Plug the other end into your device. Your power

bank automatically begins charging your device.

Note: If charging Airpods or an Apple Watch, press the

button twice to start the low current charging mode (for

low-power charging devices), double-click again to exit or

automatically exit after two hours. Four LEDs blink in

sequence indicating Low Power mode is turned on.

Charging two devices

When wireless charging and USB-C output are

performed at the same time, the USB-C output takes

precedence.

Checking your battery charge level

When you press the button, the four LEDs indicate

the battery charge level.

CAUTION: When an error occurs, all four LED indicators will

blink simultaneously. Unplug your power bank if this occurs.

Package contents

• Magnetic wireless power bank

• 1 ft. (30.5 cm) USB-C to USB-C cable

• Quick Setup Guide

Magnetic Wireless

Power Bank

Quick Setup Guide

BE-MQ2515W25 / BE-MQ2515W25-C

Troubleshooting

Device is not charging or charges slowly.

• Make sure that your device is positioned in the

center of the charging pad.

• Make sure that there are no other objects on the

charging pad.

• When a metal object is detected or the charger

gets too warm, the wireless charging status LED

blinks. The power bank enters protection mode

until the issue is resolved.

• Try removing your device’s case.

• Make sure that your device supports wireless

charging.

• Using the phone while it is charging will make it

charge more slowly.

• Wireless charging technology is slower than wired

chargers. This is normal.

My device gets warm while charging.

It is normal for devices to get warm while charging.

Kickstand

1 LED (blinking): <25%

1 LED on and 1 LED blinking: 25 to 50%

2 LEDs on and 1 LED blinking: 50 to 75%

3 LEDs on and 1 LED blinking: 75 to 95%

4 LEDs on: 95 to 100% full charged

Charging pad

USB-C port

USB-C to USB-C cable

(included)

Wall charger

(not included)

Button

Battery charge level Wireless charging status

USB-C to USB-C cable

(included)

Warnings

• Do not drop, disassemble, open, crush, bend, deform, puncture, shred,

microwave, incinerate, paint, submerge in a liquid, or insert foreign objects

into the power bank.

• Keep power banks out of the reach of children. Children should be

supervised when a power bank is in use.

• Do not expose power banks to heat or re. Do not store in direct sunlight or

in a vehicle.

• Do not use or charge a damaged power bank. In the event of a power bank

leaking, keep away from skin and eyes. Wash any aected area with large

amounts of water and seek medical attention.

• Power banks need to be charged before use.

Always use the correct cable and refer to the power bank manufacturer’s

instructions for proper charging instructions.

• Do not use any cable other than that specically provided or recommended

by the power bank manufacturer.

• Do not use a damaged cable to charge or discharge a power bank.

• Do not leave a power bank on prolonged charge when not in use.

• Disconnect the power bank from the charging source once full.

• Observe the dedicated input and output ports for receiving and providing

power on the power bank and the device to be charged to ensure correct use.

• Do not use any power bank which is not designed for use with the device

you wish to charge. Refer to the device’s manual for proper charging

instructions.

• When possible, detach the cable(s) from power bank when not in use.

• Only use the power bank in the application for which it was intended.

• Store the power bank in a cool, dry place when not in use. When a power

bank is not used for prolonged periods, the power bank should be charged

periodically in order to maintain power bank life.

• Dispose of the power bank properly.

Specications

Note: Power bank output capacity will be less than the

built-in battery capacity. Performance varies based on

settings and environmental conditions, and decreases

over time and with use.

• × × : 4.02 × 2.68 × 0.55 in. Dimensions (H W D)

(10.2 × 6.8 × 1.4 cm)

• : 5.29 oz. (150 g)Weight

• : 5V/3.0AUSB-C input/output

• : 7.5W MaxWireless charging output

• : 5,000mAh/3.7V (18.5Wh)Battery capacity

V2 ENGLISH 24-0291

Safety information

• Do not place metal objects between devices and the wireless charging

pads.

• Recharge the power bank if it has not been used for more than 90 days.

• Risk of res and burns. Do not open, crush, heat above 140° F (60° C), or

incinerate. Follow the instructions.

• Operating environment temperatures: 32~95° F (0~35° C)

• Do not place this device in re or other excessively hot environments.

• This product is intended for home oce use, and for indoor use only.

• Consult local sta before using the product near medical or industrial

equipment or on board an aircraft.

• Unplug the power bank if not used for an extended period of time.

• Make sure that your mobile phone is compatible with wireless charging

before using.

• Make sure that the charging plate is placed on a at surface.

• Make sure that the mobile phone does not move away from the charging

pad’s wireless inductive charging area. Most non-metallic protective

cases can be used for charging. The thickness of the case should not

exceed 0.1 in. (3 mm). Make sure that the case contains no metal.

• When metal is placed in the charging area, the charging plate

automatically recognizes the metal and turns the power o.

Normal charging resumes when the metal is removed.

• When the temperature of the charging pad is too high, the automatic

protection mode turns on and the power bank turns o. Unplug the

power supply then use the charging pad when it returns to a normal

temperature.

• Keep all instructions provided with the device for future reference.

• People with pacemakers should keep away from the magnets. The

magnets can negatively aect the function of the pacemaker.

• Do not place any bank or similar cards with magnetic strips or

magnetically sensitive objects on the product. The data on the cards could

be damaged or completely deleted.

• Ensure that there are no metal parts on the back of your device. Metal

heats up signicantly in the eld of an induction charger and can damage

your device and/or the charger.

Legal notices

FCC compliance

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

FCC Caution:

Changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC Statement:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure: This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment. This transmitter must not be

co-located or operating in conjunction with any other antenna or

transmitter.

RSS-Gen statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may

cause undesired operation of the device.

Ce dispositif contient des émetteurs exonérés de permis(s)/récepteurs)s

2. Ce dispositif doit accepter toute interférence, y compris les interférences

qui sont conformes aux RSS (s) exemptés de licence du Canada. L’opération

est soumise aux deux conditions suivantes :

1. Cet appareil peut ne pas causer d’interférences.

2. Ce dispositif doit accepter toute interférence, y compris les interférences

qui peuvent provoquer un fonctionnement indésirable de l’appareil.

RSS-102 Statement

This equipment complies with IC RSS_102 radiation exposure limits set

forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux radiations IC

CNR_102 établies pour un environnement non contrôlé.

One-year limited warranty

Visit www.bestbuy.com/bestbuyessentials

for details.

Contact Best Buy essentials

For customer service, call

1-877-467-4289 (U.S. and Canada)

www.bestbuy.com/bestbuyessentials

Best Buy essentials is a trademark of Best Buy and its aliated companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

Specyfikacje produktu

Marka:	Best Buy
Kategoria:	bank mocy
Model:	BE-MQ2515W25

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Best Buy BE-MQ2515W25, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje bank mocy Best Buy

Best Buy BE-MB22020B25 Instrukcja

2 Stycznia 2025

Best Buy BE-MB21020B25 Instrukcja

2 Stycznia 2025

Best Buy BE-MQ2515W25 Instrukcja

1 Stycznia 2025

Instrukcje bank mocy

Najnowsze instrukcje dla bank mocy

Hama 00201713 Instrukcja

3 Stycznia 2025

Energizer UE10038PQ Instrukcja

2 Stycznia 2025

Emos B0551GY Instrukcja

31 Grudnia 2025

Emos B0555GY Instrukcja

31 Grudnia 2025

Anker PowerCore 13000 Instrukcja

30 Grudnia 2025

RYOBI RYSP21A Instrukcja

30 Grudnia 2025

EcoFlow DELTA 2 Smart Extra Battery Instrukcja

29 Grudnia 2024

Xtorm XR101 Instrukcja

29 Grudnia 2024

Omnicharge Omni Mobile 12,800 PRO Instrukcja

29 Grudnia 2024

Omnicharge Omni 20+ Instrukcja

29 Grudnia 2024