Instrukcja obsługi Bernina Bernette 340 Deco

Bernina maszyna do szycia Bernette 340 Deco

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bernina Bernette 340 Deco (75 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/75
IMPORTANT SAFETY INSTRUCTIONS! 1
When using an electrical appliance, basic safety precautions should
always be followed, including the following:
Read all instructions before using this sewing computer. When the
sewing computer is not in use, it should be disconnected from the
electricity supply by removing the plug from the outlet.
DANGER
To reduce the risk of electrical shock:
1. An appliance should never be left unattended when plugged in.
2. Always unplug this sewing computer from the electrical outlet
immediately after using and before cleaning.
WARNING
To reduce the risk of burns, fire, electrical shock or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary
when this sewing computer is used by or near children and
infirm persons. This sewing computer is not intended for use by
persons (including children) with reduched physical, sensory or
mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use
of the sewing computer by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the sewing computer.
2. Use this sewing computer only for its inten ded use as described
in this manual. Use only attachments recommended by the
manu facturer as contained in this manual.
3. Never operate this sewing computer if:
• ithasadamagedcordorplug,
 • itisnotworkingproperly
 • ithasbeendroppedordamaged,
• ithasfallenintowater
Return the sewing computer to the nearest authorized BERNINA
dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the sewing computer with any air vents blocked.
Keep ventilation openings of the sewing computer and foot
controller free from accumulation of lint, dust and fabric
remnants and the like.
5. Keep fingers away from all moving parts. Special care is required
around the sewing needle.
6. Always use the BERNINA original stitch plate. The wrong plate
can cause needle breakage.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching, this may deflect the
needle, causing it to break.
9. Turn power switch to «0» (off) when making any adjust ments in
the needle area, such as threading or changing the needle,
threading the bobbin or changing the presser foot etc.
10. Always unplug the sewing computer from the electrical outlet
when removing covers, lubricating or when making any other
user servicing adjustments mentioned in this instruction manual.
11. Never drop or insert any object into any openings on the sewing
computer.
12. Do not use the sewing computer outdoors.
13. Do not operate where aerosol (spray) products are being used or
where oxygen is being administered.
14. To disconnect, turn all controls to the off («0») position then
remove the plug from the outlet.
15. Do not unplug by pulling on the cord, instead, grasp the plug
before pulling.
16. No responsibility will be taken on behalf of BERNINA for any
possible damage as the result of misuse of the sewing computer.
17. Under no circumstances should the sewing computer be left
unattended when using the embroidery module.
18. This sewing computer is provided with double insulation (except
USA / Canada). Use only identical replacement parts. See
instructions for servicing of double-insulated machines.
SERVICING DOUBLE-
INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is provided on
a double-insulated product nor should a means for grounding be
added to the product. Servicing a double-insulated product requires
extreme care and knowledge of the system and should only be done
by qualified service personnel. Replacement parts for a double-
insulated product must be identical to those parts in the product. A
double insulated product is marked with the words «DOUBLE
INSULATION» or «DOUBLE INSULATED».
The symbol may also be marked on the product.
This sewing and embroidery computer is intended for
household use only.
SAVE THESE INSTRUCTIONS!
ENVIROMENTAL
PROTECTION
BERNINA is committed to environmental protection. We are
increasing the environmental friendliness of our products by
constantly improving them in terms of design and production
technologiy.
If you no longer require this product, please dispose of it in an
environmentally responsible fashion according to national guidelines.
Do not dispose of this product in your household waste. In case of
doubt, please contact your dealer.
Welcome2
Congratulations on your decision to buy the bernette Deco 340. By owning this fascinating
embroidery computer we hope you will spend countless hours enjoying the many features and high
stitch quality that the Deco 340 provides.
This product was designed and built to the highest standards in order to keep you completely
satisfied. New features like the USB Stick Port and the Thread Cutter have been implemented to
make your sewing experience easier and even more joyful. These features combined with the large
embroidery area, the concise, easy-to-learn user interface and the many possibilities to customize
your designs on the screen will help to enhance your creativity to new heights. In order to get the
full benefit of all these functions we recommend, that you study this instruction manual first.
With a wide selection of available embroidery designs, educational publications and useful
accessories we can support you even further. Please visit your BERNINA dealer; he will provide you
with help, ideas and embroidery essentials, to make your sewing experience on the embroidery
computer even more satisfactory.
We are happy, to welcome you in the BERNINA sewing family and we hope you will have a
wonderful sewing experience with your bernette Deco 340.
P.Horisberger, Productmanager
BERNINA International AG - 8266 Steckborn / Switzerland


Specyfikacje produktu

Marka: Bernina
Kategoria: maszyna do szycia
Model: Bernette 340 Deco

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bernina Bernette 340 Deco, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Bernina

Bernina

Bernina 1130 Instrukcja

15 Października 2024
Bernina

Bernina Artista 640 Instrukcja

15 Października 2024
Bernina

Bernina aurora 440 Instrukcja

15 Października 2024
Bernina

Bernina Activa 125 Instrukcja

15 Października 2024
Bernina

Bernina 570 QE Instrukcja

15 Października 2024
Bernina

Bernina 717 Instrukcja

15 Października 2024
Bernina

Bernina B550QE Instrukcja

15 Października 2024
Bernina

Bernina Activa 240 Instrukcja

15 Października 2024
Bernina

Bernina 580 Instrukcja

15 Października 2024
Bernina

Bernina Bernette 15 Instrukcja

15 Października 2024

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff

Pfaff 1296 Instrukcja

15 Października 2024
Pfaff

Pfaff 28 Instrukcja

15 Października 2024
Singer

Singer 6136 Instrukcja

15 Października 2024
Singer

Singer 974 Instrukcja

15 Października 2024
Juki

Juki LU-1509N Instrukcja

14 Października 2024
Brother

Brother JS1400 Instrukcja

14 Października 2024
Dürkopp Adler

Dürkopp Adler 550-767 Instrukcja

13 Października 2024
Brother

Brother PR-600C Instrukcja

12 Października 2024
Singer

Singer White 1033 Instrukcja

12 Października 2024
Brother

Brother JA1710 Instrukcja

11 Października 2024