Instrukcja obsługi BenQ ScreenBar Lite AR18_C

BenQ Lampa ScreenBar Lite AR18_C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BenQ ScreenBar Lite AR18_C (37 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/37
ScreenBar Lite (AR18_C)
BenQ.com
© 2019 BenQ Corporation.
All rights reserved. Rights of modification reserved.
P/N: 96-05-00009-G
4J.W4201.001
1English
Package Contents
Check the packaging for the status of the product. If damaged, please contact the place of
purchase immediately.
The illustrations in this guide are for your reference only and may look different from the
appearance of the actual product.
For Your Safety
• Connect the USB power cable to USB port power (5V DC, 1A) only. Otherwise the lamp will
fail to work normally or result in a fire hazard.
• In order to prevent any damages to the lamp, do not hang or place any objects on the lamp.
• Route the USB power cable so as to avoid it from being pinched by items placed upon it or
against it.
• If the lamp will not be used for a long period of time, unplug it from the USB port.
Installation
1. Clamp the ScreenBar Light lamp
onto the center of the top side of
your computer’s screen bezel (as
indicated by in the figure on the
right). The range of clampable screen
bezel thickness is 3mm - 8mm.
2. Connect the USB power cable to the
USB port of your computer (as
indicated by in the figure on the
right).
• Do not use a USB extension cable.
Otherwise the lamp will not function
properly.
• It is recommended that the lamp’s
power be supplied by the USB port of
your computer. If a portable power
bank or AC power adapter is to be
used as the power source for the
lamp, the power output shall meet the
requirement (output voltage: 5V,
output current: 1A or above) in order
for the lamp to function normally.
• If the Color Temperature Adjustment
and Brightness Adjustment
buttons keep flashing, check if a USB
extension cable is used. Do not use a
USB extension cable.
• In case of the following situations, unplug the lamp from the USB port
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
- When the outer casing of the lamp is broken
- When there are strange odors coming from the lamp
- When the LED light source flickers
- When the insulation of the lamp’s wiring is damaged or frayed, and the metal
strings inside can be seen
• Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
• This lamp is designed for indoor use only. Do not use it outdoors.
• Never disassemble the lamp or remove any components from it, as doing so
may result in accidents and will void the product warranty.
CAUTION
3mm ~ 8mm
1
2

Specyfikacje produktu

Marka: BenQ
Kategoria: Lampa
Model: ScreenBar Lite AR18_C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BenQ ScreenBar Lite AR18_C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Lampa BenQ

BenQ

BenQ ScreenBar e-Reading AR17 Instrukcja

9 Grudnia 2024
BenQ

BenQ ScreenBar Plus Monitor Light AR17_C Instrukcja

9 Grudnia 2024
BenQ

BenQ e-Reading Floor Lamp Instrukcja

23 Sierpnia 2024
BenQ

BenQ ScreenBar Halo CR20_C Instrukcja

20 Sierpnia 2024
BenQ

BenQ ScreenBar Lite AR18_C Instrukcja

8 Sierpnia 2024

Instrukcje Lampa

Najnowsze instrukcje dla Lampa

Ikan

Ikan Helia HF70 Instrukcja

20 Marca 2025
Ikea

Ikea SAMBORD 005.869.49 Instrukcja

13 Marca 2025
Ikea

Ikea RÖDFLIK 405.827.08 Instrukcja

13 Marca 2025
Ikea

Ikea STORSEGEL 105.735.74 Instrukcja

13 Marca 2025
Ikea

Ikea SOLHETTA 805.914.47 Instrukcja

13 Marca 2025
Ikea

Ikea SOLHETTA 505.914.82 Instrukcja

13 Marca 2025
Ikea

Ikea SOLHETTA 005.914.27 Instrukcja

13 Marca 2025
Ikea

Ikea SAMBORD 505.869.61 Instrukcja

13 Marca 2025
Ikea

Ikea SOLHETTA 705.915.46 Instrukcja

13 Marca 2025
Ikea

Ikea SOLHETTA 405.915.00 Instrukcja

13 Marca 2025