Instrukcja obsługi BenQ DC 4330


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BenQ DC 4330 (57 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/57
EN-1
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do
not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
EN-2
TRADEMARK INFORMATION
Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.
Pentium® is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Computer, Inc.
SDTM and MMCTM are trademarks.
Other names and products may be trademarks or registered trademarks of their respective owners.
READ THIS FIRST
Notice:
1. Product design and specifications are subject to change without notice. This includes primary product
specifications, software, software drivers, and user's manual. This User Manual is a general reference
guide for the product.
2. The product and accessories that come with your camera may be different from those described in this
manual. This is due to the fact that different retailers often specify slightly different product inclusions
and accessories to suit their market requirements, customer demographics, and geographical preferences.
Products very often vary between retailers especially with accessories such as batteries, chargers, AC
adapters, memory cards, cables, carrying cases/pouches, and language support. Occasionally a
retailer will specify a unique product color, appearance, and internal memory capacity. Contact your
dealer for precise product definition and included accessories.
3. The manufacturer assumes no liability for any errors or discrepancies in this user's manual.
4. For driver updates, refer to our website.
EN-3
WARNINGS
Do not use this camera if it is emitting smoke (or an unusual odor), if it becomes unusually hot to the touch,
produces a peculiar noise, or exhibits any other abnormal conditions. Operating the camera in any of
these circumstances may cause a fire or an electrical shock. Stop using the camera immediately, turn the
camera off, remove the batteries, and disconnect the power source if you are using an AC power
adapter. Contact your dealer or authorized service facility for repairs. Never attempt to repair this camera
by yourself, as this may be dangerous.
Do not expose the camera to moisture and make sure no water gets into the camera. Take particular care
when using the camera under extreme weather conditions, such as rain or snow, or when operating the
camera at the beach on near water. Avoid using this camera in places subject to extreme moisture. Do
not use the camera if water has entered the camera. Turn the camera off, remove the batteries, and
disconnect the power source if you are using an AC power adapter. Unplug the adapter from the AC
power outlet after you have disconnected the camera. Contact your dealer or authorized service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
Do not touch the power plug during a thunderstorm if you are using the AC power adapter. This may
cause an electrical shock.
Do not use the camera if any foreign objects have entered the camera. Turn the camera off, remove the
batteries, and disconnect the power source if you are using an AC power adapter. Unplug the adapter
from the AC power outlet after you have disconnected the camera. Contact your dealer or authorized
service facility. Do not continue to use the camera as this may cause a fire or an electrical shock.


Specyfikacje produktu

Marka: BenQ
Kategoria: Aparat cyfrowy
Model: DC 4330

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BenQ DC 4330, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Aparat cyfrowy BenQ

BenQ

BenQ DC C62 Instrukcja

23 Września 2024
BenQ

BenQ C123X Series Instrukcja

22 Września 2024
BenQ

BenQ DC E610 Instrukcja

21 Września 2024
BenQ

BenQ E1020 Instrukcja

21 Września 2024
BenQ

BenQ 1500 Instrukcja

20 Września 2024
BenQ

BenQ DC 4330 Instrukcja

18 Września 2024
BenQ

BenQ AE100-serie Instrukcja

14 Września 2024
BenQ

BenQ C1450 Instrukcja

12 Września 2024
BenQ

BenQ DC-T700 Instrukcja

9 Września 2024
BenQ

BenQ E 1465 Instrukcja

9 Września 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy