Instrukcja obsługi Beltronics Shifter ZR4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beltronics Shifter ZR4 (6 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
L A S E R D E F E N S E S Y S T E M
Owners Ma nual
L S T A S E R H I F T I N G E C H N O L O G Y P IR O F E S S I O N A L N S T A L L A T I O N
SHIFTER ZR4 is designed in the USA
CINCINNATI MICROWAVE
5440 West Chester Road
West Chester OH 45069
Sales/Service 800-433-3487
LaserShifting.com
©2008 CINCINNATI MICROWAVE.
ESCORT, SHIFTER ZR4, SPEED OF LIGHT PROTECTION and CINCINNATI MICROWAVE are trademarks of Escort Inc.
BELTRONICS is a trademark of Beltronics USA Inc.
Features, specifications and prices subject to change without notice.
S O L PP E E D F I G H T R O T E C T I O N
®®
Congratulations and Important Warning
Congratulations
Your new SHIFTER ZR4 is the most
advanced defense system against targeting
laser guns. The SHIFTER ZR4 includes (2)
front-mounted and (1) rear license plate
mounted laser transceivers, interface
module, display controller with audible and
visual alerts, and a remote mute button.
In addition, your new SHIFTER ZR4
introduces a new level of Laser defense
including:
Visual indicators for front and rear
signals
Volume adjustment
Self-test diagnostics mode with error
indication
Standard remote mute button
provides one-touch mute and
manual “receive only” mode.
High-Speed A/D converter
dramatically improves laser
detection range
Please read the manual in detail to get
the most out of your new SHIFTER’s
performance and features.
Please drive safely.
PLEASE NOTE:
This product may be limited or prohibited
in some jurisdictions. Check applicable
laws before using.
IMPORTANT INSTALLATION WARNING:
The SHIFTER ZR4 requires professional
installation. New car dealers, and a select
group of car audio specialists can install the
SHIFTER ZR4 for you. Call us toll-free at
1-800-433-4387, or visit our website at
LaserShifting.com for an authorized dealer
near you.
Attempting to install the SHIFTER ZR4
without expertise in automotive electronic
installations can cause personal injury
during the installation, or can damage your
SHIFTER or your vehicle. If your vehicle is
damaged during installation, its safety
systems may be compromised, which could
cause personal injury or property damage.
Table of Contents
Introduction
Congratulations I
Important Warning I
Quick Reference Guide 2
Controls and Features 3-5
Laser Transceivers 3
Power and Volume Control 3
Power-on Indication 3
Mute/Remote Mute Button 3
Receive Only Mode 3
Display Brightness 4
Alerts 4
Diagnostics/Error Indications 4
Detector Configuration 5
(Optional)
Technical Details 6-7
Specifications 6
How Laser Works 7
Service 8-9
Troubleshooting 8
Service 9
Accessories 9
Warranty 9
1
I
Power/Volume Control
Rotate the thumbwheel to turn the
SHIFTER on and set the volume. (We
recommend wiring the SHIFTER to a
switched circuit so that it will turn on/off
with your vehicle’s ignition).
Front Signal Indication
Flashing LED (red) provides visual alert
for incoming laser signals received from
the front of the vehicle.
Power On Indication
Single LED (blue) provides power-on and
self-diagnostics indication.
Rear Signal Indication
Flashing LED (red) provides visual alert for
incoming laser signals received from the
rear of the vehicle.
Automatic Brightness Control
A built-in photocell will adjust the display
brightness automatically based on the
ambient light in the vehicle.
Mute Button
Briefly press this button on the display
controller, or the standard remote mute
button, to silence the audio for a specific
alert. (The audio will alert you to the next
encounter.) Press the mute button twice
during an alert for manual “receive only
mode.
Quick Reference Guide
2 3
Laser Transceivers
Your SHIFTER ZR4 is equipped with a total
of three (2 front, 1 rear) laser transceivers.
These highly sensitive laser transceivers
will detect a laser signal, and respond (or
transmit) a pulsed signal back in order to
“Shift” or confuse the targeting laser gun.
These highly sensitive transceivers
must have a clear view of the road, and
must be installed parallel to the road and
aimed correctly in order to work properly.
See Installation Manual for complete details.
Power and Volume Control
To turn the SHIFTER on and adjust the alert
tone volume level, rotate the thumbwheel
on SHIFTER’s Display/Controller. Turn the
volume control knob to the left to increase
the audio volume. When you turn the
SHIFTER on, it will go through a sequence
of alerts and verify communication to the
laser transceivers.
Power-On Indication
After the SHIFTER’s start-up sequence is
complete, the pilot LED (blue) will stop
flashing, informing you that the system is
turned on and functioning properly.
Mute/Remote Mute Button
The Mute Button, located on SHIFTER’s
front panel, or the installed Remote Mute
Button, allows you to silence the audio alert
during a laser encounter.
To mute the audio,
briefly press the Mute
Button or the installed
Remote Mute Button
once. After that
laser encounter has
passed, the mute will
automatically reset and
the audio will alert you to the next
encounter.
Manual “Receive OnlyMode
The Remote Mute button can also be used
to manually shut off the laser transceivers
once you have corrected your speed. Since
some laser guns provide “jamming” codes
for the officer, this can be useful to avoid
any undue attention.
Simply press the installed Remote
Mute Button, or the mute button located on
the Display Controller twice during a laser
alert. All SHIFTERS will cease to transmit,
and the alert LED will stop flashing and
remain on. This indicates that you are now
in “receive only” mode.
The SHIFTERS remain in the “receive
only” mode for approximately sixty
seconds, giving you time to pass the speed
trap. Once this time has expired, the alert
LED will turn off, and a double beep tone
will be given, indicating that the SHIFTERS
are now back in the “active” mode.
Controls and Features


Specyfikacje produktu

Marka: Beltronics
Kategoria: Nie skategoryzowane
Model: Shifter ZR4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beltronics Shifter ZR4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Beltronics

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane