Instrukcja obsługi Beko DEN48520X

Beko Pomywaczka DEN48520X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Beko DEN48520X (47 stron) w kategorii Pomywaczka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/47

Document Number :

18 7430 0100_AA_BEKO_E9_EN/ 10-07-19.(8:01)

Dishwasher

User’s Manual

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

hints about usage.

Warning for hazardous

situations with regard to life and

property.

Warning for electric shock.

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other

wastes. Take them to the packaging material collection points designated by the local

authorities.

Please read this user manual first!

Dear Customer,

We hope that you get the best results from your product which has been manufactured

with high quality and state-of-the-art technology. Therefore, please read this entire

user manual and all other accompanying documents carefully before using the product

and keep it as a reference for future use. If you handover the product to someone else,

give the user manual as well. Follow all warnings and information in the user manual.

Remember that this user manual is also applicable for several other models. Differences

between models will be identified in the manual.

This product was manufactured using the latest technology in environmentally friendly conditions.

Document Number :

18 7430 0100_AA_BEKO_E9_EN/ 10-07-19.(8:01)

Dishwasher

User’s Manual

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or useful

hints about usage.

Warning for hazardous

situations with regard to life and

property.

Warning for electric shock.

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other

wastes. Take them to the packaging material collection points designated by the local

authorities.

Please read this user manual first!

Dear Customer,

We hope that you get the best results from your product which has been manufactured

with high quality and state-of-the-art technology. Therefore, please read this entire

user manual and all other accompanying documents carefully before using the product

and keep it as a reference for future use. If you handover the product to someone else,

give the user manual as well. Follow all warnings and information in the user manual.

Remember that this user manual is also applicable for several other models. Differences

between models will be identified in the manual.

This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS

1 INSTRUCTIONS FOR SAFETY

AND ENVIRONMENT 4

General safety 4 .......................................

Intended use 4 ..........................................

Children’s safety 5 ....................................

Disposing of packaging material 5 ........

Transportation of the product 5 ............

Compliance with WEEE Directive and

Disposing of the Waste Product 6 .........

Compliance with RoHS Directive 6 ........

Package information 6 ............................

2 DISHWASHER 7

Overview 7 ................................................

Fan drying system 8 .................................

Technical specications 8 .......................

3 INSTALLATION 9

Appropriate installation location 9 .......

Connecting water supply 9 .....................

Connection to the drain 10 ....................

Adjusting the feet 10 ..............................

Aquasafe+ 11 ...........................................

Electrical connection 11 ..........................

Initial use 11 ..............................................

4 PREPARATION 12

Tips for energy saving 12 ........................

Water softening system 12 ....................

Adjusting the water softening

system 12 ..................................................

Adding salt ...........................................14

Detergent 15 .............................................

Tablet detergents ...............................16

Rinse aid 17 ...............................................

Items not suitable for washing in the

dishwasher .......................................... 18

Placing the dishes into the

dishwasher .......................................... 18

Cutlery basket 20 ....................................

Collapsible lower basket tines 21 ..........

Tray Wash Supports 22 ...........................

SoftTouch Accessory 22 .........................

Lower Basket Glass Holder 22 ...............

Lower basket multipurpose / height

adjustable service rack 23 .....................

Lower basket bottle wire 24 ..................

Upper basket height adjustable rack 24

Upper basket multipurpose service

rack 24 .......................................................

Adjusting the height of the upper

basket 25 ..................................................

Collapsible upper basket wires 26 ........

Height setting with empty basket 26 ..

Ceiling cutlery basket 27 .........................

5 OPERATING THE PRODUCT 28

Programme Selection / Programme

Cancel key 29 ............................................

Function Keys 29 .....................................

Preparing the machine...................... 29

Programme selection 29 ........................

Auxiliary functions 31 .............................

Scheduling the washing time 34 ..........

Starting the programme 34 ...................

Cancelling the programme 35 ...............

Salt indicator ( ) 35 ..............................

Rinse Aid indicator ( ) 35 .....................

End of programme 35 .............................

Adjusting the amount of rinse aid 35 ...

Water cut-o warning 36 .......................

Overowing warning 36 .........................

6 MAINTENANCE AND

CLEANING 37

Cleaning the outer surface of the

product 37 .................................................

Cleaning the interior of the machine 37

Cleaning the lters 37 .............................

Cleaning the hose lter 38 .....................

Cleaning the impellers 39 ......................

Lower impeller assembly 39 ..................

Upper impeller 39 ...................................

7 TROUBLESHOOTING 40

4 Dishwasher / User’s Manual/45 EN

instructions for safety and environment

This section contains safety

instructions that will help to get

protected from risk of personal

injury or property damage. Failure

to follow these instructions shall

void all warranties.

General safety

•Never place the product

on a carpet-covered floor;

otherwise, lack of airflow

beneath the product will

cause electrical parts to

overheat. This will cause

problems with your product.

•Do not operate the product

if the power cable / plug is

damaged! Call the Authorised

Service Agent.

•Connect the product to a

grounded outlet protected

by a fuse complying with

the values in the “Technical

specifications” table. Do

not neglect to have the

grounding installation made

by a qualified electrician. The

manufacturer shall not be

liable for any damages that

will arise when the product

is used without grounding

in accordance with the local

regulations.

•The water supply and

draining hoses must be

securely fastened and remain

undamaged.

•Unplug the product when not

in use.

•Never wash the product by

spreading or pouring water

onto it! There is the risk of

electric shock!

•Never touch the plug with

wet hands! Never unplug by

pulling on the cable, always

pull out by grabbing the plug.

•The product must be

unplugged during installation,

maintenance, cleaning and

repairing procedures.

•Always have the installation

and repairing procedures

carried out by the Authorised

Service Agent. Manufacturer

shall not be held liable for

damages that may arise from

procedures carried out by

unauthorised persons.

•Never use chemical solvents

in the product. They bring

forth the risk of explosion.

•When you pull the upper and

lower baskets out completely,

the door of the product will

bear all the weight of the

baskets. Do not put other

loads on the door; otherwise,

the product may tilt.

•Never leave the door of

the product open apart

from loading and unloading

procedures.

•Do not to open the door

of the product when it is

running unless necessary.

Be careful for the rush of hot

steam when you open the

door.

Intended use

•This product has been

designed for domestic use.

•It must be used to do the

domestic type dishes only.

Dishwasher / User’s Manual 5 / 45 EN

instructions for safety and environment

•This appliance is intended

to be used in household and

similar applications such as:

- Staff kitchen areas in shops,

offices and other working

environments;

- Farm houses;

- By clients in hotels, motels

and other residential type

environments;

- Bed and breakfast type

environments

•Only dishwasher safe

detergents, rinse aids and

additives must be used.

•The manufacturer waives

any responsibility arisen

from incorrect usage or

transportation.

•The service life of your

product is 10 years. During

this period, original spare

parts will be available to

operate the product properly.

•This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical,sensory

or mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Children

shall not play with the

appliance. Cleaning and user

maintenance shall not be

made by children without

supervision.

Children’s safety

•Electrical products are

dangerous for the children.

Keep children away from the

product when it is in use. Do

not let them to tamper with

the product.

•Do not forget to close the

door of the product when

leaving the room where it is

located.

•Store all detergents and

additives in a safe place

away from the reach of the

children.

Disposing of

packaging material

Packaging materials are

dangerous to children. Keep

packaging materials in a safe

place away from reach of the

children.

Packaging materials of the

product are manufactured from

recyclable materials. Dispose

of them properly and sort in

accordance with recycled waste

instructions. Do not dispose

of them with normal domestic

waste.

Transportation of the

product

If you need to move the

product, do it in upright

position and hold from

the rear side. Slanting

the product onto its

front side may cause the

electronic parts in it get

wet and damaged.

6 Dishwasher / User’s Manual/45 EN

instructions for safety and environment

1. Unplug the product before

transporting it.

2. Remove water drainage and

water supply connections.

3. Drain the remaining water in

the product completely.

Compliance with

WEEE Directive and

Disposing of the

Waste Product

This product complies with

EU WEEE Directive

(2012/19/EU). This product

bears a classification

symbol for waste electrical and

electronic equipment (WEEE).

This product has been

manufactured with high quality

parts and materials which can be

reused and are suitable for

recycling. Do not dispose of the

waste product with normal

domestic and other wastes at the

end of its service life. Take it to

the collection center for the

recycling of electrical and

electronic equipment. Please

consult your local authorities to

learn about these collection

centers.

Compliance with RoHS

Directive

The product you have purchased

complies with EU RoHS Directive

(2011/65/EU). It does not contain

harmful and prohibited materials

specified in the Directive.

Package information

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations. Do

not dispose of the packaging

materials together with the

domestic or other wastes. Take

them to the packaging material

collection points designated by

the local authorities.

Dishwasher / User’s Manual 7 / 45 EN

Dishwasher

Overvew

1. Upper basket

2. Upper impeller

3. Lower impeller

4. Silverware basket

5. Door

6. Rating Label

7. Control panel

8. Detergent dispenser

9. Lower basket

10. Filters

11. Salt reservoir lid

12. Upper basket rail

13. Upper cutlery basket (depends on model)

14. Tabletop (depends on model)

15. Fan drying system (depends on model)

8 Dishwasher / User’s Manual/45 EN

Dishwasher

Techncal specfcatons

Compliance to standards and test data / EC declaration of conformity

This product complies with the following EU directives;

Development, production and sales stages of this product comply with the safety

rules included in all pertaining European Community regulations.

2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242

Power input 220-240 50 Hz (see rating label) V,

Total power consumption 1800-2100 W (see rating label)

Heater power consumption 1800 W (see rating label)

Total current (depends on the model) 10 A (see rating label)

Drain pump power consumption 30 W (see rating label)

Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0

Mpa)

Technical specifications may be changed without prior notice to improve the

quality of the product.

Figures in this manual are schematic and may not match the product exactly.

Values stated on the markings of the product or in the printed documents

accompanying the product are obtained in the laboratory on basis of the

relevant standards. Depending on operational and environmental conditions of

the product, these values may vary.

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests can be

e-mailed to the following address:

dishwasher@standardloading.com

Do not forget to provide the code, stock and serial numbers of the product to be tested in

your request e-mail along with your contact information. Code, stock and serial numbers of

the product may be found on the type label attached to the side wall of the door.

Fan dryng system

(depends on model)

Fan drying system ensures efficient drying of your dishes.

It is normal to hear a different sound than that of washing cycle during fan operation.

Dishwasher / User’s Manual 9 45 / EN

3Installation

Refer to the nearest Authorised Service

Agent for installation of your product. To

make the product ready for use, make sure

that the electricity, tap water supply and

water drainage systems are appropriate

before calling the Authorised Service Agent.

If they are not, call a qualified technician

and plumber to have any necessary

arrangements carried out.

Preparation of the location and

electrical, tap water and waste

water installations at the place

of installation is the customer's

responsibility.

Installation and electrical

connections must be carried

out by the Authorised Service

Agent. Manufacturer shall

not be held responsible

for damages arising from

processes carried out by

unauthorised persons.

Prior to installation, visually

check if the product has any

defects on it. If so, do not have

it installed. Damaged products

cause risks for your safety.

Make sure that the water inlet

and discharge hoses are not

folded, pinched or crushed

while pushing the product into

its place after installation or

cleaning procedures.

When placing the product, pay attention

not to damage the floor, walls, piping, etc.

Do not hold the product by its door or panel

to move it.

Approprate nstallaton

locaton

•Place the product on a solid and flat

floor that has sufficient load carrying

capacity! The product must be

installed on a flat surface in order for

the door to be closed comfortably and

securely.

•Do not install the product at places

where temperature may fall below 0ºC.

•Place the product at least 1 cm away

from the edges of other furniture.

•Place the product on a rigid floor. Do

not place it on a long pile rug or similar

surfaces.

Do not place the product on the

power cable.

•Make sure that you select a location

that will allow you to load and unload

the dishes in a fast and comfortable

manner.

•Install the product in a place close to

the tap and the drain hole. Select the

installation location by considering

that it will not be changed after the

connections are made.

Connectng water supply

We recommend attaching a

filter on the house/apartment

supply water inlet to protect

the machine from damages

that may arise from impurities

(sand, dirt, rust, etc.) coming

from the urban water supply

system or from your own water

system as well as to prevent

complaints such as yellowing or

sludge accumulation at the end

of washing.

10 Dishwasher / User’s Manual/45 EN

Installation

Permitted water temperature: up

to 25°C

The dishwasher may not be connected to

open warm water devices or flow-through

water heaters.

•Do not use old or used water inlet

hose on the new product. Use the new

water inlet hose supplied with the

product.

•Connect the water inlet hose directly

to the water tap. Pressure coming

from the tap should be minimum 0.3

and maximum 10 bars. If the water

pressure exceeds 10 bars, a pressure

relief valve should be installed in

between.

•Open the taps completely after making

the connections to check for water

leaks.

Use a screw-on hose connector

to connect the water inlet hose

to a water tap with a ¾ inch

external thread. If required, use

a filter insert to filter deposits

from the pipes.

For your safety, close the water

inlet tap completely after the

washing programme is over.

Connecton to the dran

Water discharge hose can directly be

connected to the drain hole or sink’s

drainage. The length of this connection

must be min. 50 cm and max. 100 cm from

the floor. A discharge hose longer than 4

meters causes dirty washing.

Attach the water discharge hose to the

drainpipe without bending it. Tightly fix

the water discharge hose to the drainpipe

in order to prevent any dislocation of the

water discharge hose during operation of

the product.

min

300

min

120

max 1000

min 500

Drainpipe must be connected

to the sewage system and it

should not be connected to any

surface water.

Adjustng the feet

If the door of the product cannot be closed

properly or if the product swings when you

push it slightly, then you need to adjust

the feet of the product. Adjust the feet of

the product as illustrated in the installation

manual supplied with the product.

Dishwashers door must be

aligned properly otherwise hot

steam can escape! Danger of

serious burns, other injury or

may damage furniture.

Dishwasher / User’s Manual 11 45 / EN

Installation

•The voltage and allowed fuse or breaker

protection are specified in the “Technical

specifications” section. If the current

value of the fuse or breaker in the house

is less than 16 Amps, have a qualified

electrician install a 16 Amp fuse.

•The specified voltage must be equal to

your mains voltage.

•Do not make connections via extension

cables or multi-plugs.

Damaged power cables must

be replaced by the Authorised

Service Agent.

If your dishwasher is equipped

with internal illumination, lamp

should only be replaced by the

Authorised Service Agent in

case of failures that may occur

on the lamp.

If the product has a failure, it

should not be operated unless

it is repaired by the Authorised

Service Agent! There is the risk

of electric shock!

Initial use

Before starting to use the product, make sure

that all preparations are made in accordance

with the instructions in sections “Important

safety instructions” and “Installation”.

•To prepare the product to do the dishes,

perform first operation in the shortest

programme with detergent while the

machine is empty. During the initial use,

fill the salt reservoir with 1 litre of water

prior to filling it with salt.

There might be a small amount

of water left in the product

after factory quality control

tests. This has no harm on the

product.

Aquasafe+

(depends on model)

The Aquasafe+ system protects against

water leaks that may occur at the hose

inlet.Water contact with the valve box of

the system must be avoided to prevent

damage to the electrical system. If the

Aquasafe+ system is damaged, unplug the

product and call the Authorised Service

Agent.

As the hose set contains

electrical connections and

assemblies, never shorten

or lengthen the hose with

extension hoses.

Electrical connection

Connect the product to a grounded outlet

protected by a fuse complying with the

values in the “Technical specifications”

table. The manufacturer shall not be liable

for any damages that will arise when the

product is used without grounding in

accordance with the local regulations.

•Connection must comply with national

regulations.

•Power cable plug must be within easy

reach after installation.

Unplug the product after the

washing programme is over.

12 Dishwasher / User’s Manual/45 EN

Preparation

Tps for energy savng

Following information will help you use

the product in an ecological and energy-

efficient manner.

Wipe away any coarse food remnants on

the dishes before putting them in the

product.

Operate the product after filling it

completely.

When selecting a programme, consider

the table of "Programme data and average

consumption values".

Do not put more detergent than suggested

on the detergent package.

Water softenng system

The product is equipped with a water

softening system which reduces the

hardness of incoming water. This system

softens the supply water to a level that will

allow washing the dishes with the required

quality.

The mains water hardness must

be softened if it is over 7°dH.

Otherwise, hardness ions will

accumulate on the dishes that

are washed and may affect the

washing, rinsing and drying

performances of the machine.

Adjustng the water

softenng system

Cleaning, rinsing and drying performance of

your dishwasher will increase when water

softening system is adjusted properly.

Adjust the new water hardness level

according to the Water hardness level

instruction in this booklet.

Use the test strip supplied with the product

according to the steps given below to

determine hardness level of your supply

water.

Dishwasher / User’s Manual 13 45 / EN

Preparation

Remove the test

strip from the

packet.

Turn on the tap and

let the water run for

about a minute.

Hold the test strip in

the water for about

a second.

Remove the test

strip from the water

and shake it.

Wait for 1 minute. The test strip shows

you the hardness

level.

After determining hardness level of the supply water:

1. After switching on your machine, long press the Menu key

2. Pres the settings menu key for 3 seconds to enter the Settings Menu.

3. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”

position will be displayed).

4. Using the Selection key, adjust water hardness level according to the hardness of the

supply water. For correct setting please see “Water hardness level setting table”.

5. Press the Menu key to exit the settings menu. Your setting will be saved automatically.

Water hardness level adjustment table

Hardness

Level

English Water

Hardness °dE

German Water

Hardness °dH

French Water

Hardness °dF Water Hardness Level Indicator

Level 0 0-5 0-4 0-8 Press the Selection key to switch the water

hardness level to position 1. (r1)

Level 1 6-9 5-7 9-13

Level 2 10-15 8-12 14-22 Press the Selection key to switch the water

hardness level to position 2. (r2)

Level 3 16-19 13-15 23-27 Press the Selection key to switch the water

hardness level to position 3. (r3)

Level 4 20-24 16-19 28-34 Press the Selection key to switch the water

hardness level to position 4. (r4)

Level 5 25-62 20-50 35-90 Press the Selection key to switch the water

hardness level to position 5. (r5)

IIn order to protect your glassware against glass corrosion in an optimal way, you have to

perform the same hardness settings, which you have made in the control panel, with the

regeneration setting switch.

For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration

adjustment switch to 3rd level.

Regeneration Adjustment Switch

0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level

1 1 2 3 4 5

14 Dishwasher / User’s Manual/45 EN

Preparation

It is recommended to use

granule- or powder-formed

softening salts in the water

softening system. Do not use

salts that do not completely

dissolve in water such as table

salt or rock salt. Otherwise the

performance of the system may

deteriorate in time.

Salt reservoir will be filled

with water when you start

the product. For this reason,

add salt before operating the

machine.

1. Firstly, take the lower basket out to add

softening salt.

2. Turn the salt reservoir lid counter-

clockwise to open it (A).

3. Add 1 litre of water to salt reservoir of

your machine only in initial use.

4. Fill the salt reservoir with salt by

using the salt funnel (D). To speed up

dissolution rate of salt in water, stir it

with a spoon.

If the hardness level of the supply water

is above 90 °dF or if you are using well

water, then it is recommended to use water

purification devices and special filters.

If the hardness level of the supply water is

below 13°dF, there is no need to use salt

in your dishwasher. If this is the case, “No

Salt Warning Indicator” (if any) illuminates

continuously on the panel of your machine.

If the water hardness level adjustment is

set to level 1, the “No salt warning indicator”

will illuminate continuously although it

is not necessary to use salt. If you use

salt under this condition, salt will not be

consumed and the Salt indicator will not

illuminate.

If you move your house, it is

necessary to readjust water

hardness level of your machine

by considering the information

given above according to the

hardness level of the supply

water in your new location.

Your machine will display the

most recently adjusted water

hardness level.

Adding salt

Water softening system needs to be

regenerated in order for the product

operates with the same performance

continuously. Dishwasher salt is used for

this purpose.

Use only special softening salts

produced particularly for the

dishwashers in your machine.

Dishwasher / User’s Manual 15 45 / EN

Preparation

Adding detergent

Pay attention to the warnings

on the detergent packaging

to get better washing and

drying results. Contact the

manufacturer of the detergent

for further questions.

Do not put solvents into the

detergent dispenser. There is

the risk of explosion!

Put the detergent into the detergent

dispenser just before operating the machine

as illustrated below.

1. Push the latch to right to open the

detergent dispenser lid (A).

2. Put suggested amount of powder, liquid/

gel or tablet detergent in the reservoir.

Inside the detergent dispenser

there are level markings that

help you use appropriate

amount of powder detergent.

When brimful, detergent

dispenser will contain 45 cm³

of detergent. Fill detergent up

to 15 cm³ or 25 cm³ level marks

in the detergent dispenser

according to fullness of the

machine and/or soiling degree

of the dishes. One tablet

is enough if you are using

detergent tablets.

You can put about 2 kg of

softening salt into the salt

reservoir.

5. Replace the lid and tighten it when the

reservoir is full.

You need to add salt right before

starting the machine. Thus, the

overflowing salty water will be

flushed immediately, preventing

the risk of corrosion in machine.

In cases where you would not

start washing immediately,

run your machine empty in the

shortest program.

Since different salt brands in the

market have different particle

sizes and since the water

hardness may vary, dissolution

of the salt in water may take

a couple of hours. Therefore,

Salt Indicator remains on for a

while after adding salt into the

machine.

Detergent

You can use powder, liquid/gel or tablet

detergents in the machine.

Only use in the machine

the detergents produced

particularly for use with

dishwashers. We recommend

you not use detergents that

contain chlorine and phosphate

as they are harmful for the

environment.

16 Dishwasher / User’s Manual/45 EN

Preparation

Tablet detergents

In addition to the conventional tablet

detergents, there are also commercially

available detergent tablets that show water

softening salt and/or rinse aid effect. Some

types of these detergents contain special-

purpose components such as glass and

stainless steel protectors. These tablets

show their effects up to a certain water

hardness level (21°dH). Water softening

salt and rinse aid must also be used

together with the detergent if the water

hardness level is above the mentioned level.

The best washing performance

in dishwashers is obtained by

using detergent, rinse aid and

water softening salt individually.

Observe the instructions of the

detergent manufacturer on

the package when using tablet

detergents.

Contact the detergent

manufacturer if your dishes

are wet and/or if you notice

limescale spots particularly on

your glasses after the washing

programme is over when using

a tablet detergent.

3. Push the lid of the detergent dispenser

to close it. A "click" will be heard when

the lid is closed.

Use powder or liquid/gel

detergent in short programmes

without prewash since the

solubility of the tablet detergent

changes depending on the

temperature and time.

Dishwasher / User’s Manual 17 45 / EN

Preparation

When you switch to powder

detergent from tablet detergent:

1. Make sure that salt and rinse aid

reservoirs are full.

2. Set the water hardness to the highest

level and perform an empty run.

3. After the empty washing cycle, review

the user manual and readjust the water

hardness level so as to suit the water

supply.

4. Make the appropriate rinse aid settings.

Rnse ad

The rinse aid used in

dishwashers is a special

combination that aims to

increase drying efficiency and

prevent water or lime stains

on the washed items. For this

reason, care must be paid

to have rinse aid in the rinse

aid reservoir and to use rinse

aids produced specially for

dishwashers only.

1. Open the lid of the rinse aid reservoir

with the help of the latch.

2. Fill the reservoir until “MAX” level.

3. Slightly press the point (B) of the

reservoir lid to close it.

4. If there are stains on tableware items

after washing, level must be increased

and if there is a blue trace after wiping

them by hand, it must be decreased.

This is set to position 3 as factory

default.

The rinse aid adjustment is

described under "Adjusting

the amount of rinse aid" in

the section for operating the

machine.

Wipe clean any spilled rinse

aid outside the reservoir. Rinse

aid that spilled accidentally

will cause foaming and it will

eventually decrease washing

performance.

Dishwasher / User’s Manual 19 45 / EN

Preparation

Suggestions for loading the dishwasher

Lower basket

Upper basket

Improper Loading Of Dishware

20 Dishwasher / User’s Manual/45 EN

Preparation

Cutlery basket

(depends on model)

Cutlery basket is designed to wash your

dishes such as knife, fork, spoon, etc. in an

efficient manner.

Since the cutlery basket can be moved (A,

B), you can create more space while placing

your dishes in the lower basket and free up

space for your dishes of different sizes.

Cutlery basket

(depends on model)

Cutlery basket is designed to wash your

dishes such as knife, fork, spoon, etc. in an

efficient manner.

Since the cutlery basket can be moved (A,

B), you can create more space while placing

your dishes in the lower basket and free up

space for your dishes of different sizes..

Dishwasher / User’s Manual 21 45 / EN

Preparation

Collapsible lower basket

tines

(depends on model)

There are foldable tines (A) located at the

lower basket of the machine are designed

for an easier placement of large pieces such

as pans, bowls, etc. You can create larger

spaces by folding each tines individually or

all of them at once.

To bring the collapsible tines into horizontal

position, grab the tines from mid position

and push them in the directions of arrows

(B). To bring the tines back to vertical

position, just lift them up. Collapsible tines

will click into the latch again (C).

Bringing the tines to the

horizontal position by holding

them from the tips may cause

them to bend. Therefore, it

will be appropriate to bring the

tines in the middle to horizontal

or vertical position by holding

them from their stems and

pushing in the direction of

arrow.

Collapsible lower basket

tines

(depends on model)

There are foldable tines (A) located at the

lower basket of the machine are designed

for an easier placement of large pieces such

as pans, bowls, etc. You can create larger

spaces by folding each tines individually or

all of them at once.

To bring the collapsible tines into horizontal

position, grab the tines from mid position

and push them in the directions of arrows

(B). To bring the tines back to vertical

position, just lift them up. Collapsible tines

will click into the latch again (C).

22 Dishwasher / User’s Manual/45 EN

Preparation

Tray Wash Supports

(depends on model)

Use the supports to wash trays in the

bottom basket.

See the Auxiliary functions section for

appropriate programme and function

selection.

Bringing the tines to the

horizontal position by holding

them from the tips may cause

them to bend. Therefore, it

will be appropriate to bring the

tines in the middle to horizontal

or vertical position by holding

them from their stems and

pushing in the direction of

arrow.

SoftTouch Accessory

(depends on model)

The SoftTouch Accessory found in the

lower basket of your machine enables a

safe washing for your fragile glasses.

Lower Basket Glass Holder

(depends on model)

Lower Basket Glass Holder found in the

lower basket of your machine enables a

safe washing for your oversized and tall

glasses.

Dishwasher / User’s Manual 23 45 / EN

Preparation

Lower basket multipurpose

/ height adjustable service

rack

(depends on model)

This accessory located at the lower basket

of your machine allows you to easily wash

pieces such as extra glasses, long ladles

and bread knives.

You may use the racks as

required by moving them to

lower or upper position, or close

them to create a wider space in

your lower basket.

Make sure that the impeller

does not touch the dishes you

placed on the racks.

To close the racks:

1. Fold the rack (A).

2. Slide the rack up (B).

3. Put the rack in vertical position (C).

4. Slide the rack down and lock it by the

tabs (D).

You may open the racks in the

same process in reverse order.

To adjust the height of the racks:

1. Fold the rack (E).

2. Slide the rack up (F).

3. Open the rack at the desired level (G).

24 Dishwasher / User’s Manual/45 EN

Preparation

Upper basket multipurpose

service rack

(depends on model)

This accessory located at the upper basket

of your machine allows you to easily wash

pieces such as extra long ladles and bread

knives.

You can lift up the upper basket

multipurpose service rack to remove it if

you do not want to use it.

If you want to use the upper basket

multipurpose service rack again, you can

easily attach it to the side section of your

upper basket.

Upper basket height

adjustable rack

(depends on model)

Use the lower and upper parts of the height

adjustable racks in the upper basket of

the machine by sliding them down or up

according to the heights of the glasses,

cups or etc. (A, B, C).

Lower basket bottle wire

(depends on model)

The bottle wire is designed for easier

washing of long pieces with wide mouths.

You may take out the bottle wire from the

basket when not in use by pulling it out

from both sides (H).

Dishwasher / User’s Manual 25 45 / EN

Preparation

To lower the basket, while it is in the

uppermost position;

1. Hold the upper basket wires with both

hands, slightly lift up the basket and

simultaneously push and release the

latches shown in the figure (B).

2. Lower the basket from its current

position to the lower one.

3. Release the basket after it has reached

one level down.

Repeat the process if the height is not

sufficient.

The movement mechanism

may not function properly if the

upper basket is overloaded or

if the weight distribution is not

balanced. In heavier conditions,

there is the risk of falling one

level down.

Make sure that the adjustment

mechanism has the same

positions on the right and left

sides of the upper basket.

Adjusting the height of the

upper basket

(depends on model)

The upper basket height adjustment

mechanism has been designed for you to

create large spaces in the lower or upper

sections of your machine depending on

your needs by adjusting the height in the

upper or lower direction while your basket

is empty or loaded.

Thanks to this mechanism, you can use

your basket in three different positions,

namely lower, middle and upper positions

(1, 2, 3).

1. To raise your basket, hold the upper

basket wires with both hands while the

basket is in the lowermost position and

pull them up (A).

2. You will hear a "Click" from the right

and left mechanisms, indicating that

the basket has reached the next level.

Release the basket.

Repeat the process if the height is not

sufficient.

Dishwasher / User’s Manual 27 45 / EN

Preparation

Ceiling cutlery basket

(depends on model)

Ceiling cutlery basket is designed to wash

your cutlery items such as forks, spoons

and etc. by placing them between the bars

on the basket.

Ceiling cutlery basket

(depends on model)

Ceiling cutlery basket is designed to wash

your cutlery items such as forks, spoons

and etc. by placing them between the bars

on the basket.

In models with partial movement feature,

pushing the bar (1) on the handle enables

the central tray of the basket to get to

the lower position and the system gets

unlocked. Thus right and left side trays can

be used as moving parts.

The free space enabled by the side trays

allows long parts to be loaded in the upper

basket.

When the central tray is in the lower

position, you can load long/high items such

as coffee cups, ladles, etc. on the tray. When

the side trays lean on two side walls, the

handle can be pulled to allow the central

tray to rise and the system to be locked.

28 Dishwasher / User’s Manual/45 EN

7. Function Selection Keys

8. Programme Selection Keys

9 10 11

12 13 14

16171819

9. Auto Door Open Indicator (depends on the model)

10. Filter Cleaning Function Indicator (depends on the model)

11. IonGuard Function Indicator (depends on the model)

12. Delay Time / Programme Time Indicator

13. Delayed Start Indicator

14. End of Programme Indicator

15. Rinse Aid Indicator

16. Salt Indicator

17. Water Cut-off Indicator

18. Liquid Detergent Dosing Indicator (depends on the model)

19. Tablet Detergent Indicator (depends on the model)

1 2

3 4 5 6

1. On / Off Key

2. Menu Key

3. Time Delay Selection

/ Menu Direction Selection Keys

4. Selection / Confirmation Key

5. Display

6. Start / Pause / Cancel Key

Operating the product

Fast+ Function

SteamGloss Function

TrayWash Function

Half Load function

Dishwasher / User’s Manual 29 45 / EN

Operating the product

On/Off Key

When you press the On/Off key, the

indicator lights illuminate on the display

for ON position. The lights turn off in OFF

position.

Programme Selection /

Programme Cancel key

Select the desired programme using the

“programme selection keys” and press the

button.

To cancel the running programme, open the

door of the machine and press and hold the

Programme Start/Pause/Cancel key for 3

seconds.

After the 3 - 2 - 1 countdown, 0:01 is

displayed, close the door of the product

and wait for the draining process complete.

Draining is completed in 2 minutes and the

machine gives an audible warning when it

is completed.

Function Keys

If you press any of the Function keys

during programme selection or time delay

selection, an affirmative key signal will be

heard provided that the relevant function

is supported by the selected programme.

Function will be deemed selected when the

indicator of the selected function is lit.

To cancel the selected function, keep the

function key pressed until the function

indicator disappears.

Preparing the machine

1. Open the door of the dishwasher.

2. Place the dishes in accordance with the

instructions in the user manual.

3. Make sure that the upper and lower

impellers rotate freely.

4. Put adequate amount of detergent into

the detergent dispenser.

Programme selection

1. Press the On/Off button to turn on

your machine.

2. Check the Salt and Rinse Aid indicators

and add salt and/or rinse aid if needed.

3. Refer to the table of "Programme data

and average consumption values"

to determine a washing programme

suitable for your dishes.

4. Selected programme will start when

you close the door of your machine.

30 Dishwasher / User’s Manual/45 EN

Operating the product

1 2 3 4 5 6 7 8

Auto AquaFlex Intensive Eco * GlassCare Quick&Shine Mini Prewash

40-65 ºC - 70 ºC 50 ºC 40 ºC 60 ºC 35 ºC -

Determines the

soiling degree of the

dishes and sets the

temperature and

amount of the

washing water as

well as the washing

time automatically.

Suitable for all types

of dishes.

It is the most

suitable washing

programme for daily

mixed dishes

including plastic

items. While

delicate glass items

are washed in the

upper basket, pans

and trays can be

washed in the lower

basket.

Suitable for heavily

soiled dishes, pots

and pans.

Most economical

washing programme

for the medium

soiled daily dishes

that are kept waitin

Special programme

for gentle cleaning

of delicate

glassware.

Daily washing

programme for

normally soiled

dishes in the fastest

way.

Suitable for lightly

soiled daily dishes

that are scraped or

pre-cleaned.

Suitable for

removing the

remnants on the

soiled dishes that

will be kept waiting

in the machine for a

few days, and thus,

for preventing the

bad odour buildup.

Medium to high Medium High Medium Low Medium Low -

+ + + + + - - +

+ + + + + + + -

+ + + + + + - -

112-180 203 170 245 120 58 30 15

9,4-12,4 19 16,8 9,5 13,6 10,6 10,8 4

0,90-1,45 1,53 1,51 0,94 1,20 1,18 0,80 -

Degree of Soiling

Energy (kWh)

Prewash

Wash

Dry

Duration (min)

Water (I)

Programme Table

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference

programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir,

and using the test programme.

Programme number

Programme name

Cleaning temperature

Dishwasher / User’s Manual 31 45 / EN

Operating the product

Auxlary functons

Washing programmes of your dishwasher

are designed to obtain the best cleaning

effect, considering the type of the soiling,

soiling degree and properties of the dishes

to be washed.

Auxiliary functions allow you save from

time, water and power.

Auxiliary functions may cause

changes in the programme

duration.

Auxiliary functions are not

suitable for all washing

programs. Indicator of the

auxiliary function that is not

compatible with the programme

will not be active.

Floor illumination

Warning to show that machine is

in washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the

washing programme starts and

remains lit until the end of the

programme.

Floor illumination cannot be

cancelled by the user.

TrayWash Function

Select Intensive 70°C programme and press

function key to run this function.

Fast+ Function

It shortens the time of the washing cycle

selected and decreases water consumption

by enabling washing under higher pressure.

SteamGloss Function

It provides superior drying performance.

Half Load function

It is used to operate the machine without

loading it completely.

1. Load your dishes in the machine as you

like.

2. Turn the machine on with On/Off key.

3. Select the desired programme and

press the Half Load key.

While the function is active, the selection

indicator on the selected function key will

become on.

4. Close the door of the machine to start

the programme.

With the Half Load function you

can save both water and power

while using the lower and upper

baskets of the machine.

32 Dishwasher / User’s Manual/45 EN

Operating the product

Functions Under the Settings

(depends on the model)

Under the settings menu of your product,

there are some additional functions that

depend on the model.

To access these functions, press and hold

the Menu key for 3 seconds. Use <- and

+> to proceed to the desired function or

setting.

Use the selection key to change the desired

function or setting and press the Menu key

to exit the Settings menu.

The function indicator will

light up even if the functions

activated on the settings menu

are not active in the selected

washing programme.

Submenu Functions:

(depends on the model)

Doormatic Function Off/On

Detergent Tablet Function Off/On

EverClean Function Off/On

IonGuard Function Off/On

Liquid Dosing Function Off / On

Liquid Dosing Function detergent use

setting:

Level 1: 10 cc lower than the default value

Level 2: 5 cc lower than the default value

Level 3: Use the default detergent amount

determined by the programme.

Level 4: 5 cc higher than the default value

Level 5: 10 cc higher than the default value

34 Dishwasher / User’s Manual/45 EN

Operating the product

Schedulng the washng

tme

Time Delay

If an economical electricity tariff is applied

in your region, you can use the Time

Delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 24 hours.

1. Press the Time Delay function key after

selecting the washing programme and

other auxiliary functions.

2. Once you press the Time Delay key,

Display Information Line will show

"0:30" and Time Delay indicator will

start flashing.

3. Set the desired time by pressing the

Time Delay key. Time will increase with

increments of 30 minutes up to 6 hours

and after that in 1 hour increments up

to 24 hours every time you press the

key.

4. Close the door of your machine after

setting the Delayed Start. Once

the delay time is over, the selected

programme will start automatically.

Changing the settings while Time

Delay function is active

While the Time Delay function is activated,

you cannot make changes in the washing

programme, auxiliary functions or the

duration of delay time.

Programme and auxiliary

functions cannot be set/

changed after the programme

has started.

To cancel the Time Delay function

Open the door of the product Press and

hold the Programme Selection / Programme

Cancel keys for 3 seconds. After the 3 -

2 - 1 countdown, 0:01 is displayed, close

the door of the product and wait for the

draining process complete. Draining is

completed in 2 minutes and the machine

gives an audible warning when it is

completed.

You can select and start a

new programme following the

cancellation of Time Delay

function.

Time Delay function cannot be

set after the programme starts.

Startng the programme

Close the door of your machine to start it

after selecting the programme and auxiliary

functions.

Your machine performs water

softening depending on the

hardness level of the supply

water. Washing time can

change while the programme

is running depending on the

ambient temperature where

your machine is installed,

temperature of the supply

water and amount of the dishes.

Pay attention not to open the

door of the machine when it is

running. There may be a rush of

vapour when you open the door

of your machine; be careful.

The machine will remain silent

in pause mode for some time

in order to remove the water

from the machine and on the

dishes completely and to have

the water softener cleaned, and

then it will resume running in

drying mode.

Dishwasher / User’s Manual 35 45 / EN

Operating the product

Adjusting the amount of

rinse aid

1. After switching on your machine, press

the Menu key for 1 second.

2. Using <- and +> keys, proceed to “P:”

on the display.

3. Set to the appropriate level with the

Selection key.

4. Press the Menu key to exit the settings

menu. Your setting will be saved

automatically.

No rinse aid dispensed in P:0 wash position.

1 dose of rinse aid is dispensed in P:1

position.

2 doses of rinse aid are dispensed in P:2

position.

3 doses of rinse aid are dispensed in P:3

position.

4 doses of rinse aid are dispensed in P:4

position.

Cancelling the programme

Open the door of the product Press and

hold the Programme Selection / Programme

Cancel keys for 3 seconds. After the 3 -

2 - 1 countdown, 0:01 is displayed, close

the door of the product and wait for the

draining process complete. Draining is

completed in 2 minutes and the machine

gives an audible warning when it is

completed.

There might be residues of

detergent or rinse aid in the

machine and/or on the pieces

being washed depending on the

step the programme you have

cancelled was in.

Salt indicator ( )

Please check the salt indicator on the

display to see whether there is adequate

amount of softening salt in the dishwasher

or not. You need to refill the salt reservoir

with salt whenever salt indicator appears

on the display of your machine.

Adjusting the water hardness

level is explained in Water

Softening System section.

Rinse Aid indicator ( )

Please check the rinse aid indicator on the

display to see whether there is adequate

amount of rinse aid in the dishwasher or

not. You need to refill the rinse aid reservoir

with rinse aid whenever rinse aid indicator

appears on the display of your machine.

End of programme

When the programme you have

selected comes to an end, an

audible warning signal will warn

you to turn off your machine.

This audible signal will warn you

with certain intervals before it

turns off.

End of Programme indicator will light up

when the washing programme is over.

1. Open the door of the machine.

2. Press On/Off key to turn off your

machine.

3. Close the tap.

4. Unplug the machine from the socket.

Specyfikacje produktu

Marka:	Beko
Kategoria:	Pomywaczka
Model:	DEN48520X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Beko DEN48520X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Pomywaczka Beko

Beko BDFN26450XC Instrukcja

7 Kwietnia 2025

Beko BDIN25321 Instrukcja

14 Marca 2025

Beko BDIN29453 Instrukcja

14 Marca 2025

Beko BDIN38562C Instrukcja

19 Lutego 2025

Beko BDSS25N20X Instrukcja

19 Lutego 2025

Beko DIS35023E Instrukcja

19 Lutego 2025

Beko DIN15310 Instrukcja

18 Stycznia 2025

Beko DIN46X30 Instrukcja

17 Stycznia 2025

Beko DIN15R20 Instrukcja

16 Stycznia 2025

Beko DFN39431X Instrukcja

15 Stycznia 2025

Instrukcje Pomywaczka

Najnowsze instrukcje dla Pomywaczka

Oranier GAVI 7592 XL Instrukcja

9 Kwietnia 2025

Amica DIM44D6EBq Instrukcja

9 Kwietnia 2025

Sharp QW-I1GI47EX Instrukcja

9 Kwietnia 2025

Zanussi DA 4142 Instrukcja

8 Kwietnia 2025

AEG F88010VIL Instrukcja

8 Kwietnia 2025

AEG FSK73747P Instrukcja

8 Kwietnia 2025

Miele G 5432 SCU Instrukcja

8 Kwietnia 2025

Miele G 5495 SCVi XXL Active Plus Instrukcja

8 Kwietnia 2025

AEG Favorit 675I B I Instrukcja

7 Kwietnia 2025

Asko DFI545N Instrukcja

7 Kwietnia 2025